Version: 4.0.9224
Camera: PlayerOne Saturn 533MC
This camera is supposed to have no amp glow. So no need to take darks. Because of this, I figured I could use "Hot Pixel Removal Only" for "Subtract Dark" and my flat. But when I do this I will see a slight reverse vignetting. Here is an image with exaggerated stretch to show it.
If instead I create a dark and apply it, I get this. Again exaggerated stretch.
You can download the fits, flat and dark files from here: https://1drv.ms/u/s!AmzOfpCoABCRgdZdVE_ ... w?e=V8meHN
Thanks,
Cey42
Reverse Vignetting Using "Hot Pixel Removal Only"
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
- admin
- Site Admin
- Posts: 13338
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Reverse Vignetting Using "Hot Pixel Removal Only"
Hi,
darks are really necessary for using flat frames, since you need to remove the background offset level from both the image data and the flat frame data before applying the correction. Failure to subtract the offset from the light frame leads to over correction as is seen in your sample.
SharpCap will do its best to fudge this requirement for you providing you capture your flat with the bias or dark flat option enabled. In those cases SharpCap will put a percentage value at the end of the flat file name - that is the brightness level of the background offset. If you use a flat with that info in the filename with no dark, SharpCap will apply a constant offset based on that value. I can see that your flat frame doesn't have that info in the filename, so either you created the flat in some other way, or did not use bias/dark flat, or perhaps renamed the file?
cheers,
Robin
darks are really necessary for using flat frames, since you need to remove the background offset level from both the image data and the flat frame data before applying the correction. Failure to subtract the offset from the light frame leads to over correction as is seen in your sample.
SharpCap will do its best to fudge this requirement for you providing you capture your flat with the bias or dark flat option enabled. In those cases SharpCap will put a percentage value at the end of the flat file name - that is the brightness level of the background offset. If you use a flat with that info in the filename with no dark, SharpCap will apply a constant offset based on that value. I can see that your flat frame doesn't have that info in the filename, so either you created the flat in some other way, or did not use bias/dark flat, or perhaps renamed the file?
cheers,
Robin
Re: Reverse Vignetting Using "Hot Pixel Removal Only"
Thanks for the info. I did not create the flat with a bias or dark. I will do so next time.
Cey
Cey
Re: Reverse Vignetting Using "Hot Pixel Removal Only"
Creating a flat with bias solved the issue.
Thanks,
Cey
Thanks,
Cey