Svbony sv305 color control
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Svbony sv305 color control
No matter what I adjust, I can't get sensible colors. In general there is way too much green, but that's not the only color problem. Look at this screen grab from an .avi of the Moon:
![Image]()
- Attachments
-
- moon grab.JPG (667.3 KiB) Viewed 819 times
-
admin
- Site Admin
- Posts: 13362
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Svbony sv305 color control
Hi,
I'd suggest putting the camera values back to their defaults – in particular I think that the high value of the 'black level' is contributing to the problem, as is the increased contrast. You could try putting the black level back to 0 and the contrast back to 50 and then using the auto White balance just button, or you could try resetting everything by holding down the <CTRL> key while you are opening the camera.
Cheers, Robin
I'd suggest putting the camera values back to their defaults – in particular I think that the high value of the 'black level' is contributing to the problem, as is the increased contrast. You could try putting the black level back to 0 and the contrast back to 50 and then using the auto White balance just button, or you could try resetting everything by holding down the <CTRL> key while you are opening the camera.
Cheers, Robin