Sensor test reporting 8-bit on ASI294mm (mono)

A place to report problems and bugs in SharpCap
Forum rules


If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs

Please also read about Troubleshooting USB Issues before posting.

*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***

Please include the following details in any bug report:

* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
Post Reply
ryanha
Posts: 3
Joined: Mon Nov 02, 2020 6:20 pm

Sensor test reporting 8-bit on ASI294mm (mono)

#1

Post by ryanha »

I just got the new ASI294mm mono camera and ran the sensor test.

The gain/eADU numbers look way off. If I divide by 64, they look right. (camera is 14-bit so divide by 2^6 if it thinks it is 8-bit?)

I saw an earlier thread about ASI drivers reporting the wrong bit-depth and I could not find a place to change it manually so I assume this is a bug?

lmk if there is other detail/info you need (or if this is actually operator error).

FWIW, here is the output from the test:

https://docs.google.com/spreadsheets/d/ ... sp=sharing

--Ryan
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Sensor test reporting 8-bit on ASI294mm (mono)

#2

Post by admin »

Hi Ryan,

my first guess is that you ran the analysis with the camera set to 8 bit mode (MONO8 in the colour space option). Hopefully if you change this option to MONO14/MONO16 (not quite sure which it is for that model) then you should get the correct results.

https://docs.sharpcap.co.uk/3.2/#!2!Cap ... and%20Area

Cheers, Robin
ryanha
Posts: 3
Joined: Mon Nov 02, 2020 6:20 pm

Re: Sensor test reporting 8-bit on ASI294mm (mono)

#3

Post by ryanha »

Lol, someone else just pointed that out to me.

I must have been sleepy as I did not see that setting.

I'll give that a shot tonight. Thanks!

--Ryan
donboy
Posts: 256
Joined: Sat Mar 25, 2017 1:57 am

Re: Sensor test reporting 8-bit on ASI294mm (mono)

#4

Post by donboy »

For what it's worth I got this for Mono16:
ZWO ASI294MM Pro.txt
(1.68 KiB) Downloaded 97 times
Don
ryanha
Posts: 3
Joined: Mon Nov 02, 2020 6:20 pm

Re: Sensor test reporting 8-bit on ASI294mm (mono)

#5

Post by ryanha »

@donboy, what do you use as your offset?

--Ryan
donboy
Posts: 256
Joined: Sat Mar 25, 2017 1:57 am

Re: Sensor test reporting 8-bit on ASI294mm (mono)

#6

Post by donboy »

I believe SC set it to 8 for the analysis. I normally don't use an offset with my cameras. I believe that the ascom driver sets offset to 30.
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Sensor test reporting 8-bit on ASI294mm (mono)

#7

Post by admin »

Hi Ryan,

those figures look reasonable – I wouldn't expect them to be very different from the values that get produced for the colour version of this sensor.

SharpCap will adjust the offset/brightness/black level controls during the analysis process to ensure that the values are high enough to separate the histogram peak from zero point when taking measurements.

Cheers, Robin
Post Reply