Do you know how can I avoid the 2 bright spaces on the surface of the Sun as it appears in the up right and down left off the attached picture?
Thank you!
Avoiding Bright Spaces on the Sun
Avoiding Bright Spaces on the Sun
- Attachments
-
- 21587360_1425872370823765_8391088777254294360_o.jpg (125.35 KiB) Viewed 5722 times
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Avoiding Bright Spaces on the Sun
Hi,
I'm not really a solar imager, but the first thing to do is to reduce your exposure a bit so those areas are not saturated -that will make the image look more natural even if you can't get rid of them. I think the bright areas are caused by something in the optical system rather than the camera. It may be worth trying to apply flat frames to see if that helps, but that's just a bit of a guess. Hopefully someone who does more solar imaging will be along soon - if not it may be best to post in a general astronomy forum with a solar imaging section where more people will see your post.
cheers,
Robin
I'm not really a solar imager, but the first thing to do is to reduce your exposure a bit so those areas are not saturated -that will make the image look more natural even if you can't get rid of them. I think the bright areas are caused by something in the optical system rather than the camera. It may be worth trying to apply flat frames to see if that helps, but that's just a bit of a guess. Hopefully someone who does more solar imaging will be along soon - if not it may be best to post in a general astronomy forum with a solar imaging section where more people will see your post.
cheers,
Robin
Re: Avoiding Bright Spaces on the Sun
Hello!
Using a simple solarfilter, I had the same view when capturing but after post processing got something like this. I almost thought it was a focus / exposure issue. Is it good enough? Then lower exposure and perhaps post process?
### Hardware
Computer: Windows 10 Pro (x64) on a Intel Pentium J2900 with 8GB RAM.
Cameras: QHY5III290 + ASI224MC cameras over USB 3.
Mount: iOptron Minitower + HEQ5 Pro SynScan
Accessories: DIY focuser w/ tempsensor, DIY filterwheel
Computer: Windows 10 Pro (x64) on a Intel Pentium J2900 with 8GB RAM.
Cameras: QHY5III290 + ASI224MC cameras over USB 3.
Mount: iOptron Minitower + HEQ5 Pro SynScan
Accessories: DIY focuser w/ tempsensor, DIY filterwheel
Re: Avoiding Bright Spaces on the Sun
The two areas that are bright are due to over exposure/glare in that region. Simply lower the exposure settings until the entire surface is displayed nicely in the view. You can always increase exposure in PS or other processing programs, but you cannot decrease something that is over exposed. I always start out with a really low exposure time and then gradually move up in exposure until the surface detail is quite nice and the surface over all is somewhat evenly illuminated.
Re: Avoiding Bright Spaces on the Sun
Hmmm
The OP image is an Ha image (slightly out of focus..) and shows the typical "sweet spot" contrast which comes from the etalon tuning.
Try different tuning setting to see if you can find a compromise.
A flat using a thin plastic bag over the aperture can be used to correct the brightening.
Hope this helps.
The OP image is an Ha image (slightly out of focus..) and shows the typical "sweet spot" contrast which comes from the etalon tuning.
Try different tuning setting to see if you can find a compromise.
A flat using a thin plastic bag over the aperture can be used to correct the brightening.
Hope this helps.