Hi, this is not a biggie, but...
I'm using AST LIGHTWEIGHT GUIDING KIT F3.5 for ZWO 120 mc-s. It has a true FOV of 2.9 x 3.8 degr., and I get good PA. The program tells me when to proceed. But wonder why I don't get a "finished / ta-daaaa" message in the end, when I'm really close to bullseye.
https://imgur.com/a/q1GOq
Bjorn
Where's the "finished" message?
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Where's the "finished" message?
Hi Bjorn,
that feature got added in SharpCap 3.0 - it shows a Poor/Fair/Good/Excellent indication next to the distance and also a colour coded border (Red/Amber/Green) around that text. Like this
cheers,
Robin
that feature got added in SharpCap 3.0 - it shows a Poor/Fair/Good/Excellent indication next to the distance and also a colour coded border (Red/Amber/Green) around that text. Like this
cheers,
Robin
Re: Where's the "finished" message?
Thanks, Robin. Will update.
Regards
Regards
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Where's the "finished" message?
Just to give you fair warning - the improved polar alignment in v3.0 is part of SharpCap Pro and requires you to buy a SharpCap Pro license.
cheers,
Robin
cheers,
Robin
Re: Where's the "finished" message?
Well, I don't mind paying for such a great piece of software. Just read, that if plate solving software is installed, SC will draw from that resource, and in turn I wouldn't have to star align?! So, SC Pro should be worth it.
Cheers
Cheers