Just wondering if there is a 64 bit version of Sharpcap? Sharpcapwon't recognize my Matrox VIO SDI capture card and I can only install the 64 bit driver.(directshow). The card is being recognized in virtualdub 64 bit but not in virtualdub 32 bit version. So, I guess the same would apply to Sharpcap.
Thanks for your help.
Sharpcap 64 bit version?
- admin
- Site Admin
- Posts: 13473
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sharpcap 64 bit version?
Sorry but there is no 64 bit version and I don't have plans at the moment to make one.
Normally a manufacturer would supply a 64 bit driver (that lives in the OS Kernel and talks to the hardware) and 64 *and* 32 bit versions of the DirectShow capture filter dll (often has .ax extension) - these talk to the driver. It sounds like your manufacturer has taken a shortcut and only made a 64 bit version of the capture filter
cheers,
Robin
Normally a manufacturer would supply a 64 bit driver (that lives in the OS Kernel and talks to the hardware) and 64 *and* 32 bit versions of the DirectShow capture filter dll (often has .ax extension) - these talk to the driver. It sounds like your manufacturer has taken a shortcut and only made a 64 bit version of the capture filter
cheers,
Robin
Re: Sharpcap 64 bit version?
According to this http://www.matrox.com/imaging/media/pdf ... /b_vio.pdf the Matrox Vio SDI cards have the following spec and support 32/64-bt Windows 7/8.1/10 (assuming I have the found the specs for the correct card):
The 32-bit drivers must be on a CD that came with the card or are available from a Matrox support site.
Hope this helps.
Dave
The 32-bit drivers must be on a CD that came with the card or are available from a Matrox support site.
Hope this helps.
Dave