Page 1 of 1

Poor colour balance in my images need proper settings for ZWO 224 MC for Jupiter Sharpcap Ver3.1

Posted: Fri May 11, 2018 12:16 am
by Poli_74
I keep getting poor colour balance in my resulting images. I use a 8inch CPC Celestron at f/10 with a UV/IR filter. No barlow lens.
I am using Sharpcap Version 3.1. Below are the settings that I use. I use Autostakkert and the Registax to process Wavelets and use the Autobalance RGB feature in Registax. The resulting images results in a mostly black and white image with a slight pinkish hue.
I have just started using Sharpcap and I am new to the ZWO 224MC Camera.

I want to get my proper colour balance, any help much appreciated. Thank you.

Here are my Sharcap Settings.
[ZWO ASI224MC]
Debayer Preview=On
Pan=0
Tilt=0
Output Format=AVI files (*.avi)
Binning=1
Capture Area=1304x976
Colour Space=RAW8
Temperature=27.6
Hardware Binning=Off
High Speed Mode=Off
Turbo USB=80(Auto)
Flip=Horiz
Frame Rate Limit=Maximum
Gain=300
Exposure=0.000856
Timestamp Frames=Off
White Bal (B)=50
White Bal (R)=53
Brightness=148
Auto Exp Max Gain=300
Auto Exp Max Exp M S=30000
Auto Exp Target Brightness=100
Mono Bin=Off
Apply Flat=None
Subtract Dark=None
#Black Point
Display Black Point=0
#MidTone Point
Display MidTone Point=0.5
#White Point
Display White Point=1
TimeStamp=2018-05-09T11:05:36.8013819Z
SharpCapVersion=3.1.5115.0

Re: Poor colour balance in my images need proper settings for ZWO 224 MC for Jupiter Sharpcap Ver3.1

Posted: Fri May 11, 2018 6:16 am
by admin
Hi,

Please could you share an image so we can see what your colour balance looks like with the settings you give.

Robin

Re: Poor colour balance in my images need proper settings for ZWO 224 MC for Jupiter Sharpcap Ver3.1

Posted: Sun May 13, 2018 12:52 am
by Poli_74
Ok I will attach one later. My tiff image is too large and will not upload. I’ll save a jpeg and post soon.

Re: Poor colour balance in my images need proper settings for ZWO 224 MC for Jupiter Sharpcap Ver3.1

Posted: Sun May 13, 2018 2:18 am
by Poli_74
I have attached the file. A 491 frame stack. Process Wavelets in Registax and also applied Auto RGB Balance in Registax.
Thank you.

Re: Poor colour balance in my images need proper settings for ZWO 224 MC for Jupiter Sharpcap Ver3.1

Posted: Sun May 13, 2018 7:40 pm
by admin
Hi,

to me that looks like you are using the wrong bayer pattern in AutoStakkert. With AVI captures you have to choose the pattern manually and that purple cast is typical if you have chosen the wrong one. I'd suggest going back to Autostakkert and try each of the 4 options (RGGB/BGGR/etc/etc) until you find the one that looks like the right colours.

Always a good idea to capture RAW in SER format, as SER format allows SharpCap to write the Bayer Pattern into the file header which means this problem doesn't happen.

thanks,

Robin

Re: Poor colour balance in my images need proper settings for ZWO 224 MC for Jupiter Sharpcap Ver3.1

Posted: Sun May 13, 2018 10:48 pm
by Poli_74
Thank you for the advice, I’ll try Autostakkert again soon. I’ll let you know how it goes.