Quirks with ASCOM support of iOptron AZ Mount Pro

A place to report problems and bugs in SharpCap
Forum rules


If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs

Please also read about Troubleshooting USB Issues before posting.

*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***

Please include the following details in any bug report:

* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
Post Reply
howardgrams
Posts: 26
Joined: Thu Aug 17, 2017 7:59 pm

Quirks with ASCOM support of iOptron AZ Mount Pro

#1

Post by howardgrams »

Hi Robin,

I gave up on using my old iOptron Minitower and have acquired a new iOptron AZ Mount Pro. On the whole, Sharpcap Beta 3.1.4722 is much happier. But I have noticed the a couple of problems.

* Version of SharpCap: 3.1.4722
* Camera and other hardware being user: ZWO ASI224MC
* Operating system version: Windows 10 Pro Ver 1709 Build 16299.98

Problem 1: The buttons to move the telescope up, down and left work as expected. However, the button to move the telescope right has no effect. This is when the mount speed is set to 1x.

Problem 2: When the mount speed is set to 2x, then I get a popup box with the message "Cannot move mount because: set -= is an invalid value. The valid range is : ."

I have attached a SharpCap log showing what was going on at around 20:48 when the problem was occurring.

Regards,
Howard Grams
Attachments
Log_2017-12-10T19_27_58-15272.log
(117.34 KiB) Downloaded 129 times
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Quirks with ASCOM support of iOptron AZ Mount Pro

#2

Post by admin »

Hi Howard,

I think the first issue is behaviour designed for EQ mounts carrying over to Alt/Az mounts - basically if you are tracking with an EQ mount then 'move right at 1x' is actually just 'turn off tracking'. I need to tweak that for Alt/Az mounts where it doesn't apply.

I will also look at the 2x rate issue - I think that SharpCap may be correcting for the length of the sidereal day vs the solar day in the slew rate number (some mounts expect that) and maybe the iOptron doesn't like it.

cheers,

Robin
Post Reply