Hi Robin,
I may have found a bug in the Sensor Analysis tool. Cedric_r wrote an ASCOM driver for the old SBIG cameras like my STF8300. See https://www.cloudynights.com/topic/7364 ... ras/page-5
and
https://www.cloudynights.com/topic/7364 ... ras/page-5
I tested his ASCOM driver with Sharpcap and everything seems to work, well, except for the Sensor Analysis which seems to not update once it got to "Sensor Gain measurments":
SC just sat there taking photos and nothing happened for quite a while and so I terminated the program. I think there's a bug because the STF8300 doesn't have any gain settings.
Do you think this is a bug in SC?
cytan
Possible bug in Sensor Analysis for STF8300
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
- admin
- Site Admin
- Posts: 13338
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Possible bug in Sensor Analysis for STF8300
Hi,
at that stage SharpCap is expecting the image to brighten because you have uncovered the sensor and light should be detected.
In order to proceed, SharpCap needs to find an image that has an average brightness of above about 50%. It will try to use exposures of up to 1.5s to achieve this brightness level, but it seems that in your case that length of exposure may not be sufficient. The easiest thing to do to get past this point is to try pointing the camera at a brighter source of illumination. Alternatively you could try setting the exposure manually to a longer value of 3-4s while at this stage, which should also work.
cheers,
Robin
at that stage SharpCap is expecting the image to brighten because you have uncovered the sensor and light should be detected.
In order to proceed, SharpCap needs to find an image that has an average brightness of above about 50%. It will try to use exposures of up to 1.5s to achieve this brightness level, but it seems that in your case that length of exposure may not be sufficient. The easiest thing to do to get past this point is to try pointing the camera at a brighter source of illumination. Alternatively you could try setting the exposure manually to a longer value of 3-4s while at this stage, which should also work.
cheers,
Robin
Re: (SOLVED) Possible bug in Sensor Analysis for STF8300
Hi Robin,
You're absolutely right, it's user error. I redid the sensor test again and this time I increased the illumination above 50% and the test continued to the end.
I've marked the subject as solved.
Thanks!
cytan
You're absolutely right, it's user error. I redid the sensor test again and this time I increased the illumination above 50% and the test continued to the end.
I've marked the subject as solved.
Thanks!
cytan
Re: Possible bug in Sensor Analysis for STF8300
I need to do a sensor analysis on my STF-8300M. Where did you guys get the ASCOM driver? I looked everywhere and I can't find it....any help will be appreciated (can I do the sensor analysis using a flat plate light?)
Thanks!
Pablo Lewin
The Maury Lewin Astronomical Observatory
Glendora CA USA
Thanks!
Pablo Lewin
The Maury Lewin Astronomical Observatory
Glendora CA USA
- admin
- Site Admin
- Posts: 13338
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Possible bug in Sensor Analysis for STF8300
Hi,
SBIG decided not to make one for older cameras, but fortunately someone else did - https://github.com/cedric-r/ASCOM.HomeMade.SBIGCamera
Note that I have never tested this personally as I have no SBIG cameras, I just happened to remember its existed
cheers,
Robin
SBIG decided not to make one for older cameras, but fortunately someone else did - https://github.com/cedric-r/ASCOM.HomeMade.SBIGCamera
Note that I have never tested this personally as I have no SBIG cameras, I just happened to remember its existed
cheers,
Robin