I am unable to control my CEM60 mount via SharpCap Pro. I can see that it is connected to the mount - RA, DEC, etc. shown, but it does not allow me to move the mount. The error report in SC is: "Cannot move mount because: MoveAxis failed."
I have a CEM60 mount, Firmware versions are 190716 for Mainboard, RA and DEC boards, SharpCap Pro v3.2.6248, iOptron Commander v5.74 (via StarFi), ASCOM Platform 6.4SPI 6.4.1.2695
I am using Windows 10 Pro Version 1903 OS Build 18362.900 in a SurfaceBook 2
Please advise.
Thank you!
John
MoveAxis failed - CEM60
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
-
admin
- Site Admin
- Posts: 13330
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: MoveAxis failed - CEM60
Hi,
please can you capture and send me a log file showing the error. In particular, turn on the additional logging option (bottom of first page of the settings) before opening the camera. This will record all communication between SharpCap and the mount's Ascom driver, which will hopefully let me work out what is going wrong.
Cheers, Robin
please can you capture and send me a log file showing the error. In particular, turn on the additional logging option (bottom of first page of the settings) before opening the camera. This will record all communication between SharpCap and the mount's Ascom driver, which will hopefully let me work out what is going wrong.
Cheers, Robin
Re: MoveAxis failed - CEM60
Thank you Robin and will do.
Best,
John
Best,
John