Hello,
I may need your help for this issue.
SharpCap 3.2.5949.0 (Pro license), problem occurs with both 32 and 64 bit versions
Latest SharpCap version where problem does not occur is SharpCap 2.9.3086.0
Computer is Microsoft Surface pro 6, i7 16GB ram, windows 10 home
Both Lumenera cameras (SkyNyx 2.0 and Infinity 2-1C) work fine with Lumenera software and Maxim.
With my two Lumenera cameras (SkyNyx 2.0 and Infinity 2-1C), cameras are recognized and link to SharpCap 3.2.5949.0
No image appears in Capture Display Area, though histogram is active and snapshots can be obtained and saved.
Video capture does not work.
Other cameras, namely both microsoft surface pro cameras (front and rear), work just fine with SharpCap 3.2.5949.0.
Please let me know which additional info would be needed.
Thanks in advance
A. Cidadão
Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Please also read about Troubleshooting USB Issues before posting.
*** Please do not post license keys - please report any problems with licensing to 'admin' by private message ***
Please include the following details in any bug report:
* Version of SharpCap
* Camera and other hardware being user
* Operating system version
* Contents of the SharpCap log after the problem has occurred.
[If SharpCap crashes, please send the bug report when prompted instead of including the log]
-
admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Hi,
Since Lumenera cameras are not supported directly by SharpCap, I'm assuming that you are using the camera via a direct show driver. Please let me know if that assumption is incorrect.
I just want to check on a few things to make sure my understanding is correct.
Does the histogram level rise when you increase the exposure or illuminate the camera ?
When you save an image using the snapshot button, is the image correct or is it black?
When you say the video capture does not work, please explain what happens when you press the start capture button?
It would be good also if you could send a screenshot showing the problem and a full SharpCap log file captured after you have attempted to save images and save video.
Cheers, Robin
Since Lumenera cameras are not supported directly by SharpCap, I'm assuming that you are using the camera via a direct show driver. Please let me know if that assumption is incorrect.
I just want to check on a few things to make sure my understanding is correct.
Does the histogram level rise when you increase the exposure or illuminate the camera ?
When you save an image using the snapshot button, is the image correct or is it black?
When you say the video capture does not work, please explain what happens when you press the start capture button?
It would be good also if you could send a screenshot showing the problem and a full SharpCap log file captured after you have attempted to save images and save video.
Cheers, Robin
Re: Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Hi and thank you for your prompt reply!
Yes, both cameras are recognized as direct show cameras, and connect via DirectShow, yes the histogram moves when illumination changes, and yes the snapshot is a correct image.
I'm including a screen capture of the camera connected to SharpCap version 2.9, where the live image is correctly shown, and a screen capture of the camera connected to SharpCap 3.2 where no live image (or frame) is seen, histogram is ok, and an error message following film capture is patent.
Next are two log files obtained with the camera connected to SharpCap 3.2. The first was obtained with the snapshot and the second with the film capture attempt (a ser file was reated though).
SKYnyx USB 2.0 Camera]
Resolution=640x-480
FPS=66,60
Colour Space=MONO8
Output Format=SER file (*.ser)
Frame Rate Limit=Maximum
Timestamp Frames=Off
Banding Threshold=35
Banding Suppression=0
Apply Flat=None
Subtract Dark=None
#Black Point
Display Black Point=0,13671875
#MidTone Point
Display MidTone Point=0,208984375
#White Point
Display White Point=0,45903125
TimeStamp=2019-02-21T18:29:49.3564747Z
SharpCapVersion=3.2.5949.0
SKYnyx USB 2.0 Camera]
Resolution=640x-480
FPS=66,60
Colour Space=MONO8
Output Format=SER file (*.ser)
Frame Rate Limit=Maximum
Timestamp Frames=Off
Banding Threshold=35
Banding Suppression=0
Apply Flat=None
Subtract Dark=None
#Black Point
Display Black Point=0,13671875
#MidTone Point
Display MidTone Point=0,208984375
#White Point
Display White Point=0,45903125
TimeStamp=2019-02-21T18:30:11.9428398Z
SharpCapVersion=3.2.5949.0
Thanks!
Antonio
Yes, both cameras are recognized as direct show cameras, and connect via DirectShow, yes the histogram moves when illumination changes, and yes the snapshot is a correct image.
I'm including a screen capture of the camera connected to SharpCap version 2.9, where the live image is correctly shown, and a screen capture of the camera connected to SharpCap 3.2 where no live image (or frame) is seen, histogram is ok, and an error message following film capture is patent.
Next are two log files obtained with the camera connected to SharpCap 3.2. The first was obtained with the snapshot and the second with the film capture attempt (a ser file was reated though).
SKYnyx USB 2.0 Camera]
Resolution=640x-480
FPS=66,60
Colour Space=MONO8
Output Format=SER file (*.ser)
Frame Rate Limit=Maximum
Timestamp Frames=Off
Banding Threshold=35
Banding Suppression=0
Apply Flat=None
Subtract Dark=None
#Black Point
Display Black Point=0,13671875
#MidTone Point
Display MidTone Point=0,208984375
#White Point
Display White Point=0,45903125
TimeStamp=2019-02-21T18:29:49.3564747Z
SharpCapVersion=3.2.5949.0
SKYnyx USB 2.0 Camera]
Resolution=640x-480
FPS=66,60
Colour Space=MONO8
Output Format=SER file (*.ser)
Frame Rate Limit=Maximum
Timestamp Frames=Off
Banding Threshold=35
Banding Suppression=0
Apply Flat=None
Subtract Dark=None
#Black Point
Display Black Point=0,13671875
#MidTone Point
Display MidTone Point=0,208984375
#White Point
Display White Point=0,45903125
TimeStamp=2019-02-21T18:30:11.9428398Z
SharpCapVersion=3.2.5949.0
Thanks!
Antonio
- Attachments
-
- SharpCap 3_2.jpg (401.53 KiB) Viewed 3287 times
-
- SharpCap 2_9.jpg (361.51 KiB) Viewed 3287 times
-
admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Hi,
Actually, the log file is something slightly different – in SharpCap you have to go to the help menu and then choose 'show log' and then there is a button in the log window that appears that you can use to copy all the text in the log to the clipboard. If you do that after you have attempted to use the Camera and capture with it then any errors that have occurred should be recorded in the log file.
Thanks, Robin
Actually, the log file is something slightly different – in SharpCap you have to go to the help menu and then choose 'show log' and then there is a button in the log window that appears that you can use to copy all the text in the log to the clipboard. If you do that after you have attempted to use the Camera and capture with it then any errors that have occurred should be recorded in the log file.
Thanks, Robin
Re: Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Hi and thank you! my mistake...
I attach 3 log files for your consideration (and the 4th at the end of this message):
Two obtained with SC ver 2.9, which gives no problem (one log with skynyk and other with infinity camera), and two with SC ver 3.2 (also obtained with skynyx and infinity) which gives at least two major issues, namely NO live image and NO ser file grabbing.
The log files always include the following events:
connecting the cameras (which were already USB linked and present at the direct show camera list)
taking a snapshot
capturing a video
Thanks!
Antonio
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: SharpCap Version 3.2.5949.0
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: GC Memory 117Mb
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Process Memory 151Mb
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Total Physical Memory 16308Mb
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Available Physical Memory 13221Mb
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Operating System : Microsoft Windows NT 6.2.9200.0
Debug: 11:13:15.5789193 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Started
Info: 11:13:15.6101242 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type BaslerDeviceEnumerator
Info: 11:13:15.6101242 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type QHYDeviceEnumerator
Info: 11:13:15.6101242 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type ASIDeviceEnumerator
Info: 11:13:15.6101242 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AltairDeviceEnumerator
Info: 11:13:15.6257762 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type PointGreyDeviceEnumerator
Info: 11:13:15.6257762 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type SxDeviceEnumerator
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.Altair.dll
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.ASCOMCamera.dll
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.ASI.dll
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.Basler.dll
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.Celestron.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.DS3.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.Fake.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.INova.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.NewDirectShow.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.PointGrey.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.QHY.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.SX.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvidersByReflection(String[] providerNames) :: Added device enumerator of type CelestronDeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvidersByReflection(String[] providerNames) :: Added device enumerator of type iNovaDeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type DS3DeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AscomDeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type FolderMonitorDeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type FakeDeviceEnumerator
Info: 11:13:15.6726426 Thread:#1 SharpCap.ProxyFinder`1.LoadProxiesForFactoryType(Type t) :: Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory
Info: 11:13:15.6726426 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: CPU : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz with 8 cores.
Error: 11:13:15.6726426 Thread:#1 SharpCap.ProxyFinder`1.AvailableDevices(IFactory`1 ff) :: Exception of type FileNotFoundException from Failed to Fetch available devices from proxy factory : Não foi possível carregar o ficheiro ou assemblagem 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' ou uma das respectivas dependências. O sistema não conseguiu localizar o ficheiro especificado.
Stack Trace: at SharpCap.WheelProxy.ASCOM.WheelFactory.GetAvailableDevices()
at SharpCap.ProxyFinder`1.AvailableDevices(IFactory`1 ff) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap\Utils\ProxyFinder.cs:line 83
Info: 11:13:15.6882598 Thread:#1 SharpCap.ProxyFinder`1.LoadProxiesForFactoryType(Type t) :: Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory
Info: 11:13:15.7195060 Thread:#1 SharpCap.ProxyFinder`1.LoadProxiesForFactoryType(Type t) :: Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory
Info: 11:13:15.7195060 Thread:#1 SharpCap.ProxyFinder`1.LoadProxiesForFactoryType(Type t) :: Found device Manual Filter Wheel
Warning: 11:13:15.7351145 Thread:#1 SharpCap.FocuserFinder.TryLoadFocuserProxy(FileInfo fi) :: Exception of type TargetInvocationException from Failed to loaded FocuserProxy assembly Sharpcap.FocuserProxy.ASCOM.dll because : O destino de uma invocação accionou uma excepção. : O destino de uma invocação accionou uma excepção.
Stack Trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type)
at SharpCap.FocuserFinder.LoadFocusers(Type t) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap\Utils\FocuserFinder.cs:line 116
at SharpCap.FocuserFinder.TryLoadFocuserProxy(FileInfo fi) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap\Utils\FocuserFinder.cs:line 99
Warning: 11:13:15.7351145 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : System.IO.FileNotFoundException: Não foi possível carregar o ficheiro ou assemblagem 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' ou uma das respectivas dependências. O sistema não conseguiu localizar o ficheiro especificado.
File name: 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7'
at Sharpcap.FocuserProxy.ASCOM.Factory..ctor()
AVI: O registo do enlace de assemblagem está DESACTIVADO.
Para activar o registo de falhas de enlace, defina o valor de registo [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) como 1.
Nota: Existe algum tipo de penalização no desempenho associado ao registo de falhas de enlace de assemblagem.
Para desactivar esta funcionalidade, remova o valor de registo [HKLM\Software\Microsoft\Fusion!EnableLog].
Warning: 11:13:15.7351145 Thread:#1 SharpCap.ProxyFinder`1.TryLoadProxy(FileInfo fi) :: Exception from Failed to loaded Hardware Proxy assembly SharpCap.MountProxy.ASCOM.dll because : Não é possível carregar um ou mais dos tipos pedidos. Obtenha a propriedade LoaderExceptions para mais informações. : Não é possível carregar um ou mais dos tipos pedidos. Obtenha a propriedade LoaderExceptions para mais informações.
Info: 11:13:16.0988419 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Parent being changed on PreviewPanel
at SharpCap.UI.ScrollZoomForm.OnParentChanged(Object sender, EventArgs eventArgs)
Debug: 11:13:16.2884335 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Ended
Debug: 11:13:16.4443338 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Started
Debug: 11:13:16.4453259 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Ended
Debug: 11:13:16.4642779 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Started
Debug: 11:13:16.4832292 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Timebomb checked
Info: 11:13:16.4862193 Thread:#1 SharpCap.Models.Application.get_Cameras() :: Starting scan for cameras
Debug: 11:13:16.4892135 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Started
Info: 11:13:16.4951604 Thread:#1 SharpCap.SharpCapApp.get_ForceSoftwareRendering() :: WPF Rendering tier is 2
Debug: 11:13:16.6298235 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Ended
Info: 11:13:16.7225942 Thread:#1 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: QHYCameraFinder - found 0 cameras
Info: 11:13:16.7545008 Thread:#1 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: FindCameras - found 0 cameras
Info: 11:13:17.1903424 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Microsoft Camera Front (DirectShow Cameras)
Info: 11:13:17.1903424 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Microsoft Camera Rear (DirectShow Cameras)
Info: 11:13:17.1903424 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Lumenera SKYnyx USB 2.0 Camera (DirectShow Cameras)
Warning: 11:13:17.1903424 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Exception from fetching menu items from provider : ASCOM Cameras : Não foi possível carregar o ficheiro ou assemblagem 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' ou uma das respectivas dependências. O sistema não conseguiu localizar o ficheiro especificado.
Info: 11:13:17.1913357 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Folder Monitor Camera (Virtual Cameras)
Debug: 11:13:17.1913357 Thread:#1 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Started
Debug: 11:13:17.1913357 Thread:#1 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Ended
Info: 11:13:17.1913357 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras)
Info: 11:13:17.1913357 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 2 (High Speed) (Test Cameras)
Info: 11:13:17.2042911 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: CameraListUpdated event received in UI thread
Debug: 11:13:17.3000433 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Docking setup
Debug: 11:13:17.3010425 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Startup scripts (if any) run
Debug: 11:13:17.3010425 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Menu updated
Debug: 11:13:17.3488775 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Splash and tips done
Debug: 11:13:17.3907659 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Ended
Verbose: 11:13:17.8404334 Thread:#1 SharpCap.FrameTransforms.LiveStacking.LiveStackTransform.ShouldSendImageUpdateRequest() :: Ignoring image update request because : _info=, _processor=
Verbose: 11:13:17.9182904 Thread:#1 SharpCap.FrameTransforms.LiveStacking.LiveStackTransform.ShouldSendImageUpdateRequest() :: Ignoring image update request because : _info=, _processor=
Info: 11:13:49.1256586 Thread:#1 SharpCap.Models.Application+<>c__DisplayClass39_0.<set_SelectedCamera>b__0() :: Changing camera from none to Lumenera SKYnyx USB 2.0 Camera
Info: 11:13:49.1725280 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: OpeningDevice event received in UI thread
Debug: 11:13:49.1725280 Thread:#1 SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag) :: Opening device : Lumenera SKYnyx USB 2.0 Camera (via DirectShow Cameras)
Verbose: 11:13:49.1881572 Thread:#1 SharpCap.Base.CaptureProviderBase`1.Initialize(IPreviewHost previewTargetWindow) :: Started
Verbose: 11:13:49.1881572 Thread:#1 SharpCap.Base.CaptureProviderBase`1.Initialize(IPreviewHost previewTargetWindow) :: Ended
Info: 11:13:49.2037758 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Started
Debug: 11:13:49.2037758 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Started
Debug: 11:13:49.2648537 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Ended
Info: 11:13:49.2805103 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() :: Started
Debug: 11:13:49.2805103 Thread:#1 SharpCap.Base.SimpleCaptureProvider.GetControls() :: Started
Debug: 11:13:49.5480840 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetPinControls() :: Pin controls being added
Debug: 11:13:49.6571448 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Started
Debug: 11:13:49.7040226 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Ended
Info: 11:13:49.7511321 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetCameraControls() :: Camera controls being added via native IAMCameraControl
Info: 11:13:49.7665099 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetCameraControls() :: IAMCameraControl interface not found - no camera controls will be available
Info: 11:13:49.7821245 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetProcAmpControls() :: Proc Amp controls being added via native IAMVideoProcAmp
Info: 11:13:49.7821245 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetProcAmpControls() :: IAMVideoProcAmp interface not found - no proc amp controls will be available
Info: 11:13:50.0188634 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() :: Ended
Info: 11:13:50.0344881 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Ended
Debug: 11:13:50.0501486 Thread:#1 SharpCap.Models.Camera.ApplyDefaultProfile() :: Started
Debug: 11:13:50.0657583 Thread:#1 SharpCap.Models.Camera.ApplyDefaultProfile() :: Ended (No default defined for this camera)
Info: 11:13:50.0657583 Thread:#1 SharpCap.MultiCaptureProvider.StartPreview() :: Starting preview on Lumenera SKYnyx USB 2.0 Camera
Info: 11:13:50.0903870 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Started
Info: 11:13:50.1023906 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Starting Preview on Lumenera SKYnyx USB 2.0 Camera, 640x-480, Mono, 8bits
Debug: 11:13:50.1133262 Thread:#1 SharpCap.Base.BaseImageProvider.Start() :: Started
Debug: 11:13:50.1273270 Thread:#1 SharpCap.Base.CameraProxyBase.StartPreview() :: Started
Debug: 11:13:50.1352675 Thread:Grab Thread#13 SharpCap.Base.CameraProxyBase.GrabThreadProc() :: Started
Info: 11:13:50.1462731 Thread:#1 SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap() :: Paged memory check based on total memory of 16308Mb, available of 13214Mb
Info: 11:13:50.1542181 Thread:#1 SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap() :: Paged memory enabled at 1024Mb for Frame Cache and 1024Mb for LiveStack/Misc on 64 bit system.
Info: 11:13:50.1652220 Thread:#1 SharpCap.Base.Memory.Allocator..cctor() :: Assigning 1024Mb to non-pool memory and 1024Mb to the frame pool.
Info: 11:13:50.1761937 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.StartDirectShowFrameSource() :: Started
Debug: 11:13:50.3068611 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.RenderStream() :: capture graph rendered to frame filter and preview sink
Info: 11:13:50.3248043 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.StartDirectShowFrameSource() :: Ended
Debug: 11:13:50.3367619 Thread:#1 SharpCap.Base.CameraProxyBase.StartPreview() :: Ended
Debug: 11:13:50.3486966 Thread:#1 SharpCap.Base.BaseImageProvider.Start() :: Ended
Info: 11:13:50.3597027 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StartPreview
Debug: 11:13:50.3696773 Thread:#1 SharpCap.UI.WPFControlForm.InitControls(CaptureControl captureControl, String deviceName) :: Started
Debug: 11:13:50.3806111 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Started
Debug: 11:13:50.3885898 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Ended
Verbose: 11:13:50.4005577 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Verbose: 11:13:50.4135628 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Ended
Verbose: 11:13:50.4255153 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Verbose: 11:13:50.4335101 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Ended
Verbose: 11:13:50.4454722 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Verbose: 11:13:50.4534510 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Ended
Verbose: 11:13:50.4654201 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Verbose: 11:13:50.4763570 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Ended
Verbose: 11:13:50.4853659 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Debug: 11:13:50.4983317 Thread:#1 SharpCap.UI.WPFControlForm.InitControls(CaptureControl captureControl, String deviceName) :: Ended
Info: 11:13:50.5561768 Thread:#1 SharpCap.Models.Transforms.set_SelectedTransform(Transform value) :: Selecting transform None
Info: 11:13:50.5662325 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StartPreview event received in UI thread
Info: 11:13:50.5761201 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.CygwinBinPathImpl() :: Using Unknown plate solver found at c:\cygwin\bin\
Info: 11:13:50.5870946 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.IsAvailable() :: Plate solver not available
Info: 11:13:50.5970655 Thread:#1 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DS3TransformFrame
Info: 11:13:50.6060469 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Ended
Info: 11:13:51.9155079 Thread:#24 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 3 of type DS3TransformFrame
Debug: 11:14:20.2099001 Thread:#1 SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e) :: Button Pressed Sn&apshot
Info: 11:14:20.2348225 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: CapturingFrame event received in UI thread
Info: 11:14:20.2876857 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StartCapture
Info: 11:14:20.2996449 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StartCapture event received in UI thread
Info: 11:14:20.3335623 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:20.3335623 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 2 of type PreviousFrameNotProcessed
Info: 11:14:20.4223028 Thread:Single Frame Thread#25 SharpCap.Base.FileWriters.FileWriterBase.Initialize(IFileNameProvider fnp, ColourSpaceId colourSpaceId, Int32 width, Int32 height, Int32 bytesPerPixelElement, Int32 significantBitDepth, Int32 colourPlanes, String DeviceName) :: Initializing TiffFileWriter at 640x-480x1x8bits, Mono, 1 bytes per PEL for Lumenera SKYnyx USB 2.0 Camera
Debug: 11:14:20.4242868 Thread:Single Frame Thread#25 SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz) :: Started
Debug: 11:14:20.4263127 Thread:Capture Write Thread#26 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Started
Debug: 11:14:20.4412667 Thread:Single Frame Thread#25 SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz) :: Ended
Info: 11:14:20.4552335 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:20.4552335 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 10 of type PreviousFrameNotProcessed
Debug: 11:14:20.4891453 Thread:Capture Write Thread#26 SharpCap.Base.FileWriters.TemplatedFilenameProvider.GetFilename(FrameInfo frameInfo, Boolean createDir) :: Creating directory C:\Users\António Cidadão\Pictures\SharpCap Captures\2019-02-23\Capture\11_14_20 for capture files
Info: 11:14:20.5226615 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StoppingCapture
Info: 11:14:20.5306194 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StoppingCapture event received in UI thread
Debug: 11:14:20.5236379 Thread:Single Frame Thread#25 SharpCap.Base.BaseImageProvider.BeforeStopCapture() :: Started
Debug: 11:14:20.5405594 Thread:Capture Write Thread#26 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Ended (WriteFrames is false)
Debug: 11:14:20.5425533 Thread:#1 SharpCap.Models.Camera.<ImplOnCaptureEvent>b__16_1() :: Status update after capture complete.
Debug: 11:14:20.5515616 Thread:Single Frame Thread#25 SharpCap.Base.BaseImageProvider.BeforeStopCapture() :: Ended
Info: 11:14:20.5615158 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StopCapture
Debug: 11:14:20.5685222 Thread:#1 SharpCap.Models.Application.OnStopCapture() :: Started
Debug: 11:14:20.5774948 Thread:#1 SharpCap.Models.Application.OnStopCapture() :: Ended
Info: 11:14:20.5844732 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StopCapture event received in UI thread
Info: 11:14:20.5924519 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.CygwinBinPathImpl() :: Using Unknown plate solver found at c:\cygwin\bin\
Info: 11:14:20.5994340 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.IsAvailable() :: Plate solver not available
Debug: 11:14:20.6074116 Thread:#1 SharpCap.UI.SharpCapForm.OnStopCapture() :: Started
Debug: 11:14:20.6163879 Thread:#1 SharpCap.UI.SharpCapForm.OnStopCapture() :: Ended
Info: 11:14:20.6443326 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: CaptureFrameComplete event received in UI thread
Debug: 11:14:28.1516928 Thread:#1 SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e) :: Button Pressed &Start Capture
Info: 11:14:28.1646576 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.<.ctor>b__5_8() :: Started
Info: 11:14:28.1776113 Thread:#1 SharpCap.Models.Camera.PrepareToCapture() :: Started
Info: 11:14:28.2020799 Thread:#1 SharpCap.Models.Camera.PrepareToCapture(IFileNameProvider fileNameProvider) :: Started
Debug: 11:14:28.2130491 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Prepare to capture on MultiCaptureProvider
at SharpCap.MultiCaptureProvider.PrepareToCapture(IFileNameProvider fnp)
at SharpCap.Models.Camera.PrepareToCapture(IFileNameProvider fileNameProvider)
at SharpCap.Models.Camera.PrepareToCapture()
at SharpCap.ViewModels.SharpCapViewModel.<.ctor>b__5_8()
at SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e)
Info: 11:14:28.2220607 Thread:#1 SharpCap.Base.CaptureProviderBase`1.PrepareToCapture(IFileNameProvider fnp) :: Started
Info: 11:14:28.2300390 Thread:#1 SharpCap.Base.CaptureProviderBase`1.PrepareToCapture(IFileNameProvider fnp) :: Ended
Info: 11:14:28.2380176 Thread:#1 SharpCap.Models.Camera.PrepareToCapture(IFileNameProvider fileNameProvider) :: Ended (Success)
Info: 11:14:28.2459962 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.ShowCaptureLengthDialog() :: Started
Debug: 11:14:34.4343821 Thread:#1 SharpCap.UI.WPFStartCaptureWindow.OnFormClosed(FormClosedEventArgs e) :: Started
Info: 11:14:34.4822803 Thread:#1 SharpCap.ViewModels.SharpCapViewModel+<>c__DisplayClass137_0.<ShowCaptureLengthDialog>b__0(Object sender, FormClosedEventArgs e) :: About to run the capture : LimitType = FrameLimited, LimitCount = 100, LimitTime = 00:00:00 SequenceCount = 1, SequenceInterval = 300
Debug: 11:14:34.4952483 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Run capture on MultiCaptureProvider
at SharpCap.MultiCaptureProvider.RunCapture()
at SharpCap.Models.Camera.RunCaptureImpl()
at SharpCap.Models.Camera.RunCapture()
at SharpCap.ViewModels.SharpCapViewModel.<>c__DisplayClass137_0.<ShowCaptureLengthDialog>b__0(Object sender, FormClosedEventArgs e)
at SharpCap.UI.WPFStartCaptureWindow.<>c__DisplayClass22_0.<OnFormClosed>b__0()
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
at System.Windows.Threading.DispatcherOperation.InvokeImpl()
at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
at MS.Internal.CulturePreservingExecutionContext.CallbackWrapper(Object obj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at MS.Internal.CulturePreservingExecutionContext.Run(CulturePreservingExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Threading.DispatcherOperation.Invoke()
at System.Windows.Threading.Dispatcher.ProcessQueue()
at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
Info: 11:14:34.5071878 Thread:#1 SharpCap.Base.CaptureProviderBase`1.RunCapture() :: Started
Info: 11:14:34.5131967 Thread:#1 SharpCap.Base.FileWriters.FileWriterBase.Initialize(IFileNameProvider fnp, ColourSpaceId colourSpaceId, Int32 width, Int32 height, Int32 bytesPerPixelElement, Int32 significantBitDepth, Int32 colourPlanes, String DeviceName) :: Initializing SerFileWriter at 640x-480x1x8bits, Mono, 1 bytes per PEL for Lumenera SKYnyx USB 2.0 Camera
Debug: 11:14:34.5241763 Thread:#1 SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz) :: Started
Debug: 11:14:34.5291540 Thread:Capture Write Thread#27 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Started
Debug: 11:14:34.5301246 Thread:#1 SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz) :: Ended
Info: 11:14:34.5361363 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StartCapture
Info: 11:14:34.5411231 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StartCapture event received in UI thread
Info: 11:14:34.5779962 Thread:#1 SharpCap.Base.CaptureProviderBase`1.RunCapture() :: Ended
Verbose: 11:14:34.6009751 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 0
Error: 11:14:34.6299055 Thread:Capture Write Thread#27 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Exception of type InvalidOperationException from Writing frame : Data passed to WriteFrame is the wrong size
Stack Trace: at SharpCap.Base.FileWriters.SerFileWriter.WriteFrameImpl(FrameReference frameRef) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap.Base\FileWriters\SerFileWriter.cs:line 221
at SharpCap.Base.FileWriters.FileWriterBase.WriteFrame(FrameReference frame) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap.Base\FileWriters\FileWriterBase.cs:line 140
at SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() in C:\Documents\Source Code\SharpCap3.2\src\SharpCap.Base\BaseImageProvider.cs:line 242
Info: 11:14:34.6518361 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:34.6518361 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 20 of type PreviousFrameNotProcessed
Info: 11:14:34.6518361 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DroppedBeforeTransform
Info: 11:14:34.6527967 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 5 of type NoLongerCapturing
Verbose: 11:14:34.8363511 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:35.0846909 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Info: 11:14:35.1395001 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:35.1405303 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 22 of type PreviousFrameNotProcessed
Info: 11:14:35.1405303 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DroppedBeforeTransform
Info: 11:14:35.1405303 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 35 of type NoLongerCapturing
Verbose: 11:14:35.3370109 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:35.5853057 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:35.8346630 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:36.0870061 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Info: 11:14:36.1158885 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:36.1158885 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 23 of type PreviousFrameNotProcessed
Info: 11:14:36.1158885 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DroppedBeforeTransform
Info: 11:14:36.1158885 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 98 of type NoLongerCapturing
Verbose: 11:14:36.3373354 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:36.5966419 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:36.8469721 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:37.0942917 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:37.3476394 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:37.5979645 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:37.8552780 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Debug: 11:14:37.9619900 Thread:#1 SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e) :: Button Pressed S&top Capture
Debug: 11:14:37.9958927 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Stopping capture on MultiCaptureProvider
at SharpCap.MultiCaptureProvider.StopCapture()
at SharpCap.Models.Camera.StopCaptureImpl()
at SharpCap.Models.Camera.StopCapture()
at SharpCap.ViewModels.SharpCapViewModel.<.ctor>b__5_6()
at SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e)
Info: 11:14:38.0048617 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StopCapture() :: Started
Info: 11:14:38.0128401 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StoppingCapture
Info: 11:14:38.0208304 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StoppingCapture event received in UI thread
Debug: 11:14:38.0288073 Thread:#1 SharpCap.Models.Camera.<ImplOnCaptureEvent>b__16_1() :: Status update after capture complete.
Debug: 11:14:38.0367869 Thread:#1 SharpCap.Base.BaseImageProvider.BeforeStopCapture() :: Started
Debug: 11:14:38.0447283 Thread:Capture Write Thread#27 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Ended (WriteFrames is false)
Debug: 11:14:38.0677092 Thread:#1 SharpCap.Base.BaseImageProvider.BeforeStopCapture() :: Ended
Info: 11:14:38.0796662 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StopCapture
Debug: 11:14:38.0876509 Thread:#1 SharpCap.Models.Application.OnStopCapture() :: Started
Debug: 11:14:38.0966168 Thread:#1 SharpCap.Models.Application.OnStopCapture() :: Ended
Info: 11:14:38.1056031 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StopCapture event received in UI thread
Info: 11:14:38.0726799 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:38.1125767 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 32 of type PreviousFrameNotProcessed
Info: 11:14:38.1125767 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DroppedBeforeTransform
Info: 11:14:38.1125767 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 217 of type NoLongerCapturing
Info: 11:14:38.1125767 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.CygwinBinPathImpl() :: Using Unknown plate solver found at c:\cygwin\bin\
Info: 11:14:38.1355166 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.IsAvailable() :: Plate solver not available
Debug: 11:14:38.1454862 Thread:#1 SharpCap.UI.SharpCapForm.OnStopCapture() :: Started
Debug: 11:14:38.1564607 Thread:#1 SharpCap.UI.SharpCapForm.OnStopCapture() :: Ended
Debug: 11:14:38.1664020 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StopCapture() :: StopCapture event sent
Info: 11:14:38.1734663 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StopCapture() :: Ended
I attach 3 log files for your consideration (and the 4th at the end of this message):
Two obtained with SC ver 2.9, which gives no problem (one log with skynyk and other with infinity camera), and two with SC ver 3.2 (also obtained with skynyx and infinity) which gives at least two major issues, namely NO live image and NO ser file grabbing.
The log files always include the following events:
connecting the cameras (which were already USB linked and present at the direct show camera list)
taking a snapshot
capturing a video
Thanks!
Antonio
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: SharpCap Version 3.2.5949.0
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: GC Memory 117Mb
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Process Memory 151Mb
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Total Physical Memory 16308Mb
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Available Physical Memory 13221Mb
Info: 11:13:14.3800563 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Operating System : Microsoft Windows NT 6.2.9200.0
Debug: 11:13:15.5789193 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Started
Info: 11:13:15.6101242 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type BaslerDeviceEnumerator
Info: 11:13:15.6101242 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type QHYDeviceEnumerator
Info: 11:13:15.6101242 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type ASIDeviceEnumerator
Info: 11:13:15.6101242 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AltairDeviceEnumerator
Info: 11:13:15.6257762 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type PointGreyDeviceEnumerator
Info: 11:13:15.6257762 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type SxDeviceEnumerator
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.Altair.dll
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.ASCOMCamera.dll
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.ASI.dll
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.Basler.dll
Info: 11:13:15.6257762 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.Celestron.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.DS3.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.Fake.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.INova.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.NewDirectShow.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.PointGrey.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.QHY.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.Base.InterfaceFactory`2.ScanDll(String filename) :: Probing for camera providers : C:\Program Files (x86)\SharpCap 3.2\SharpCap.Cameras.SX.dll
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvidersByReflection(String[] providerNames) :: Added device enumerator of type CelestronDeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvidersByReflection(String[] providerNames) :: Added device enumerator of type iNovaDeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type DS3DeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AscomDeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type FolderMonitorDeviceEnumerator
Info: 11:13:15.6413666 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type FakeDeviceEnumerator
Info: 11:13:15.6726426 Thread:#1 SharpCap.ProxyFinder`1.LoadProxiesForFactoryType(Type t) :: Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory
Info: 11:13:15.6726426 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: CPU : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz with 8 cores.
Error: 11:13:15.6726426 Thread:#1 SharpCap.ProxyFinder`1.AvailableDevices(IFactory`1 ff) :: Exception of type FileNotFoundException from Failed to Fetch available devices from proxy factory : Não foi possível carregar o ficheiro ou assemblagem 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' ou uma das respectivas dependências. O sistema não conseguiu localizar o ficheiro especificado.
Stack Trace: at SharpCap.WheelProxy.ASCOM.WheelFactory.GetAvailableDevices()
at SharpCap.ProxyFinder`1.AvailableDevices(IFactory`1 ff) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap\Utils\ProxyFinder.cs:line 83
Info: 11:13:15.6882598 Thread:#1 SharpCap.ProxyFinder`1.LoadProxiesForFactoryType(Type t) :: Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory
Info: 11:13:15.7195060 Thread:#1 SharpCap.ProxyFinder`1.LoadProxiesForFactoryType(Type t) :: Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory
Info: 11:13:15.7195060 Thread:#1 SharpCap.ProxyFinder`1.LoadProxiesForFactoryType(Type t) :: Found device Manual Filter Wheel
Warning: 11:13:15.7351145 Thread:#1 SharpCap.FocuserFinder.TryLoadFocuserProxy(FileInfo fi) :: Exception of type TargetInvocationException from Failed to loaded FocuserProxy assembly Sharpcap.FocuserProxy.ASCOM.dll because : O destino de uma invocação accionou uma excepção. : O destino de uma invocação accionou uma excepção.
Stack Trace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type)
at SharpCap.FocuserFinder.LoadFocusers(Type t) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap\Utils\FocuserFinder.cs:line 116
at SharpCap.FocuserFinder.TryLoadFocuserProxy(FileInfo fi) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap\Utils\FocuserFinder.cs:line 99
Warning: 11:13:15.7351145 Thread:#1 SharpCap.Base.Utilities.Logger.Warn(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : System.IO.FileNotFoundException: Não foi possível carregar o ficheiro ou assemblagem 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' ou uma das respectivas dependências. O sistema não conseguiu localizar o ficheiro especificado.
File name: 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7'
at Sharpcap.FocuserProxy.ASCOM.Factory..ctor()
AVI: O registo do enlace de assemblagem está DESACTIVADO.
Para activar o registo de falhas de enlace, defina o valor de registo [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) como 1.
Nota: Existe algum tipo de penalização no desempenho associado ao registo de falhas de enlace de assemblagem.
Para desactivar esta funcionalidade, remova o valor de registo [HKLM\Software\Microsoft\Fusion!EnableLog].
Warning: 11:13:15.7351145 Thread:#1 SharpCap.ProxyFinder`1.TryLoadProxy(FileInfo fi) :: Exception from Failed to loaded Hardware Proxy assembly SharpCap.MountProxy.ASCOM.dll because : Não é possível carregar um ou mais dos tipos pedidos. Obtenha a propriedade LoaderExceptions para mais informações. : Não é possível carregar um ou mais dos tipos pedidos. Obtenha a propriedade LoaderExceptions para mais informações.
Info: 11:13:16.0988419 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Parent being changed on PreviewPanel
at SharpCap.UI.ScrollZoomForm.OnParentChanged(Object sender, EventArgs eventArgs)
Debug: 11:13:16.2884335 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Ended
Debug: 11:13:16.4443338 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Started
Debug: 11:13:16.4453259 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Ended
Debug: 11:13:16.4642779 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Started
Debug: 11:13:16.4832292 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Timebomb checked
Info: 11:13:16.4862193 Thread:#1 SharpCap.Models.Application.get_Cameras() :: Starting scan for cameras
Debug: 11:13:16.4892135 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Started
Info: 11:13:16.4951604 Thread:#1 SharpCap.SharpCapApp.get_ForceSoftwareRendering() :: WPF Rendering tier is 2
Debug: 11:13:16.6298235 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Ended
Info: 11:13:16.7225942 Thread:#1 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: QHYCameraFinder - found 0 cameras
Info: 11:13:16.7545008 Thread:#1 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: FindCameras - found 0 cameras
Info: 11:13:17.1903424 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Microsoft Camera Front (DirectShow Cameras)
Info: 11:13:17.1903424 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Microsoft Camera Rear (DirectShow Cameras)
Info: 11:13:17.1903424 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Lumenera SKYnyx USB 2.0 Camera (DirectShow Cameras)
Warning: 11:13:17.1903424 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Exception from fetching menu items from provider : ASCOM Cameras : Não foi possível carregar o ficheiro ou assemblagem 'ASCOM.Utilities, Version=6.0.0.0, Culture=neutral, PublicKeyToken=565de7938946fba7' ou uma das respectivas dependências. O sistema não conseguiu localizar o ficheiro especificado.
Info: 11:13:17.1913357 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Folder Monitor Camera (Virtual Cameras)
Debug: 11:13:17.1913357 Thread:#1 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Started
Debug: 11:13:17.1913357 Thread:#1 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Ended
Info: 11:13:17.1913357 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras)
Info: 11:13:17.1913357 Thread:#1 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 2 (High Speed) (Test Cameras)
Info: 11:13:17.2042911 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: CameraListUpdated event received in UI thread
Debug: 11:13:17.3000433 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Docking setup
Debug: 11:13:17.3010425 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Startup scripts (if any) run
Debug: 11:13:17.3010425 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Menu updated
Debug: 11:13:17.3488775 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Splash and tips done
Debug: 11:13:17.3907659 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Ended
Verbose: 11:13:17.8404334 Thread:#1 SharpCap.FrameTransforms.LiveStacking.LiveStackTransform.ShouldSendImageUpdateRequest() :: Ignoring image update request because : _info=, _processor=
Verbose: 11:13:17.9182904 Thread:#1 SharpCap.FrameTransforms.LiveStacking.LiveStackTransform.ShouldSendImageUpdateRequest() :: Ignoring image update request because : _info=, _processor=
Info: 11:13:49.1256586 Thread:#1 SharpCap.Models.Application+<>c__DisplayClass39_0.<set_SelectedCamera>b__0() :: Changing camera from none to Lumenera SKYnyx USB 2.0 Camera
Info: 11:13:49.1725280 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: OpeningDevice event received in UI thread
Debug: 11:13:49.1725280 Thread:#1 SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag) :: Opening device : Lumenera SKYnyx USB 2.0 Camera (via DirectShow Cameras)
Verbose: 11:13:49.1881572 Thread:#1 SharpCap.Base.CaptureProviderBase`1.Initialize(IPreviewHost previewTargetWindow) :: Started
Verbose: 11:13:49.1881572 Thread:#1 SharpCap.Base.CaptureProviderBase`1.Initialize(IPreviewHost previewTargetWindow) :: Ended
Info: 11:13:49.2037758 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Started
Debug: 11:13:49.2037758 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Started
Debug: 11:13:49.2648537 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Ended
Info: 11:13:49.2805103 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() :: Started
Debug: 11:13:49.2805103 Thread:#1 SharpCap.Base.SimpleCaptureProvider.GetControls() :: Started
Debug: 11:13:49.5480840 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetPinControls() :: Pin controls being added
Debug: 11:13:49.6571448 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Started
Debug: 11:13:49.7040226 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Ended
Info: 11:13:49.7511321 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetCameraControls() :: Camera controls being added via native IAMCameraControl
Info: 11:13:49.7665099 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetCameraControls() :: IAMCameraControl interface not found - no camera controls will be available
Info: 11:13:49.7821245 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetProcAmpControls() :: Proc Amp controls being added via native IAMVideoProcAmp
Info: 11:13:49.7821245 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetProcAmpControls() :: IAMVideoProcAmp interface not found - no proc amp controls will be available
Info: 11:13:50.0188634 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() :: Ended
Info: 11:13:50.0344881 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Ended
Debug: 11:13:50.0501486 Thread:#1 SharpCap.Models.Camera.ApplyDefaultProfile() :: Started
Debug: 11:13:50.0657583 Thread:#1 SharpCap.Models.Camera.ApplyDefaultProfile() :: Ended (No default defined for this camera)
Info: 11:13:50.0657583 Thread:#1 SharpCap.MultiCaptureProvider.StartPreview() :: Starting preview on Lumenera SKYnyx USB 2.0 Camera
Info: 11:13:50.0903870 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Started
Info: 11:13:50.1023906 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Starting Preview on Lumenera SKYnyx USB 2.0 Camera, 640x-480, Mono, 8bits
Debug: 11:13:50.1133262 Thread:#1 SharpCap.Base.BaseImageProvider.Start() :: Started
Debug: 11:13:50.1273270 Thread:#1 SharpCap.Base.CameraProxyBase.StartPreview() :: Started
Debug: 11:13:50.1352675 Thread:Grab Thread#13 SharpCap.Base.CameraProxyBase.GrabThreadProc() :: Started
Info: 11:13:50.1462731 Thread:#1 SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap() :: Paged memory check based on total memory of 16308Mb, available of 13214Mb
Info: 11:13:50.1542181 Thread:#1 SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap() :: Paged memory enabled at 1024Mb for Frame Cache and 1024Mb for LiveStack/Misc on 64 bit system.
Info: 11:13:50.1652220 Thread:#1 SharpCap.Base.Memory.Allocator..cctor() :: Assigning 1024Mb to non-pool memory and 1024Mb to the frame pool.
Info: 11:13:50.1761937 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.StartDirectShowFrameSource() :: Started
Debug: 11:13:50.3068611 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.RenderStream() :: capture graph rendered to frame filter and preview sink
Info: 11:13:50.3248043 Thread:#1 SharpCap.Cameras.DS3.DS3CameraProxy.StartDirectShowFrameSource() :: Ended
Debug: 11:13:50.3367619 Thread:#1 SharpCap.Base.CameraProxyBase.StartPreview() :: Ended
Debug: 11:13:50.3486966 Thread:#1 SharpCap.Base.BaseImageProvider.Start() :: Ended
Info: 11:13:50.3597027 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StartPreview
Debug: 11:13:50.3696773 Thread:#1 SharpCap.UI.WPFControlForm.InitControls(CaptureControl captureControl, String deviceName) :: Started
Debug: 11:13:50.3806111 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Started
Debug: 11:13:50.3885898 Thread:#1 SharpCap.Cameras.NewDirectShow.FrameRatePropertyControl.PopulateValueList() :: Ended
Verbose: 11:13:50.4005577 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Verbose: 11:13:50.4135628 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Ended
Verbose: 11:13:50.4255153 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Verbose: 11:13:50.4335101 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Ended
Verbose: 11:13:50.4454722 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Verbose: 11:13:50.4534510 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Ended
Verbose: 11:13:50.4654201 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Verbose: 11:13:50.4763570 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Ended
Verbose: 11:13:50.4853659 Thread:#1 SharpCap.ViewModels.ControlFormViewModel.BuildGroup(CategoryName category) :: Started
Debug: 11:13:50.4983317 Thread:#1 SharpCap.UI.WPFControlForm.InitControls(CaptureControl captureControl, String deviceName) :: Ended
Info: 11:13:50.5561768 Thread:#1 SharpCap.Models.Transforms.set_SelectedTransform(Transform value) :: Selecting transform None
Info: 11:13:50.5662325 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StartPreview event received in UI thread
Info: 11:13:50.5761201 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.CygwinBinPathImpl() :: Using Unknown plate solver found at c:\cygwin\bin\
Info: 11:13:50.5870946 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.IsAvailable() :: Plate solver not available
Info: 11:13:50.5970655 Thread:#1 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DS3TransformFrame
Info: 11:13:50.6060469 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Ended
Info: 11:13:51.9155079 Thread:#24 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 3 of type DS3TransformFrame
Debug: 11:14:20.2099001 Thread:#1 SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e) :: Button Pressed Sn&apshot
Info: 11:14:20.2348225 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: CapturingFrame event received in UI thread
Info: 11:14:20.2876857 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StartCapture
Info: 11:14:20.2996449 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StartCapture event received in UI thread
Info: 11:14:20.3335623 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:20.3335623 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 2 of type PreviousFrameNotProcessed
Info: 11:14:20.4223028 Thread:Single Frame Thread#25 SharpCap.Base.FileWriters.FileWriterBase.Initialize(IFileNameProvider fnp, ColourSpaceId colourSpaceId, Int32 width, Int32 height, Int32 bytesPerPixelElement, Int32 significantBitDepth, Int32 colourPlanes, String DeviceName) :: Initializing TiffFileWriter at 640x-480x1x8bits, Mono, 1 bytes per PEL for Lumenera SKYnyx USB 2.0 Camera
Debug: 11:14:20.4242868 Thread:Single Frame Thread#25 SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz) :: Started
Debug: 11:14:20.4263127 Thread:Capture Write Thread#26 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Started
Debug: 11:14:20.4412667 Thread:Single Frame Thread#25 SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz) :: Ended
Info: 11:14:20.4552335 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:20.4552335 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 10 of type PreviousFrameNotProcessed
Debug: 11:14:20.4891453 Thread:Capture Write Thread#26 SharpCap.Base.FileWriters.TemplatedFilenameProvider.GetFilename(FrameInfo frameInfo, Boolean createDir) :: Creating directory C:\Users\António Cidadão\Pictures\SharpCap Captures\2019-02-23\Capture\11_14_20 for capture files
Info: 11:14:20.5226615 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StoppingCapture
Info: 11:14:20.5306194 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StoppingCapture event received in UI thread
Debug: 11:14:20.5236379 Thread:Single Frame Thread#25 SharpCap.Base.BaseImageProvider.BeforeStopCapture() :: Started
Debug: 11:14:20.5405594 Thread:Capture Write Thread#26 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Ended (WriteFrames is false)
Debug: 11:14:20.5425533 Thread:#1 SharpCap.Models.Camera.<ImplOnCaptureEvent>b__16_1() :: Status update after capture complete.
Debug: 11:14:20.5515616 Thread:Single Frame Thread#25 SharpCap.Base.BaseImageProvider.BeforeStopCapture() :: Ended
Info: 11:14:20.5615158 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StopCapture
Debug: 11:14:20.5685222 Thread:#1 SharpCap.Models.Application.OnStopCapture() :: Started
Debug: 11:14:20.5774948 Thread:#1 SharpCap.Models.Application.OnStopCapture() :: Ended
Info: 11:14:20.5844732 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StopCapture event received in UI thread
Info: 11:14:20.5924519 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.CygwinBinPathImpl() :: Using Unknown plate solver found at c:\cygwin\bin\
Info: 11:14:20.5994340 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.IsAvailable() :: Plate solver not available
Debug: 11:14:20.6074116 Thread:#1 SharpCap.UI.SharpCapForm.OnStopCapture() :: Started
Debug: 11:14:20.6163879 Thread:#1 SharpCap.UI.SharpCapForm.OnStopCapture() :: Ended
Info: 11:14:20.6443326 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: CaptureFrameComplete event received in UI thread
Debug: 11:14:28.1516928 Thread:#1 SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e) :: Button Pressed &Start Capture
Info: 11:14:28.1646576 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.<.ctor>b__5_8() :: Started
Info: 11:14:28.1776113 Thread:#1 SharpCap.Models.Camera.PrepareToCapture() :: Started
Info: 11:14:28.2020799 Thread:#1 SharpCap.Models.Camera.PrepareToCapture(IFileNameProvider fileNameProvider) :: Started
Debug: 11:14:28.2130491 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Prepare to capture on MultiCaptureProvider
at SharpCap.MultiCaptureProvider.PrepareToCapture(IFileNameProvider fnp)
at SharpCap.Models.Camera.PrepareToCapture(IFileNameProvider fileNameProvider)
at SharpCap.Models.Camera.PrepareToCapture()
at SharpCap.ViewModels.SharpCapViewModel.<.ctor>b__5_8()
at SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e)
Info: 11:14:28.2220607 Thread:#1 SharpCap.Base.CaptureProviderBase`1.PrepareToCapture(IFileNameProvider fnp) :: Started
Info: 11:14:28.2300390 Thread:#1 SharpCap.Base.CaptureProviderBase`1.PrepareToCapture(IFileNameProvider fnp) :: Ended
Info: 11:14:28.2380176 Thread:#1 SharpCap.Models.Camera.PrepareToCapture(IFileNameProvider fileNameProvider) :: Ended (Success)
Info: 11:14:28.2459962 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.ShowCaptureLengthDialog() :: Started
Debug: 11:14:34.4343821 Thread:#1 SharpCap.UI.WPFStartCaptureWindow.OnFormClosed(FormClosedEventArgs e) :: Started
Info: 11:14:34.4822803 Thread:#1 SharpCap.ViewModels.SharpCapViewModel+<>c__DisplayClass137_0.<ShowCaptureLengthDialog>b__0(Object sender, FormClosedEventArgs e) :: About to run the capture : LimitType = FrameLimited, LimitCount = 100, LimitTime = 00:00:00 SequenceCount = 1, SequenceInterval = 300
Debug: 11:14:34.4952483 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Run capture on MultiCaptureProvider
at SharpCap.MultiCaptureProvider.RunCapture()
at SharpCap.Models.Camera.RunCaptureImpl()
at SharpCap.Models.Camera.RunCapture()
at SharpCap.ViewModels.SharpCapViewModel.<>c__DisplayClass137_0.<ShowCaptureLengthDialog>b__0(Object sender, FormClosedEventArgs e)
at SharpCap.UI.WPFStartCaptureWindow.<>c__DisplayClass22_0.<OnFormClosed>b__0()
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
at System.Windows.Threading.DispatcherOperation.InvokeImpl()
at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
at MS.Internal.CulturePreservingExecutionContext.CallbackWrapper(Object obj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at MS.Internal.CulturePreservingExecutionContext.Run(CulturePreservingExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Threading.DispatcherOperation.Invoke()
at System.Windows.Threading.Dispatcher.ProcessQueue()
at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
Info: 11:14:34.5071878 Thread:#1 SharpCap.Base.CaptureProviderBase`1.RunCapture() :: Started
Info: 11:14:34.5131967 Thread:#1 SharpCap.Base.FileWriters.FileWriterBase.Initialize(IFileNameProvider fnp, ColourSpaceId colourSpaceId, Int32 width, Int32 height, Int32 bytesPerPixelElement, Int32 significantBitDepth, Int32 colourPlanes, String DeviceName) :: Initializing SerFileWriter at 640x-480x1x8bits, Mono, 1 bytes per PEL for Lumenera SKYnyx USB 2.0 Camera
Debug: 11:14:34.5241763 Thread:#1 SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz) :: Started
Debug: 11:14:34.5291540 Thread:Capture Write Thread#27 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Started
Debug: 11:14:34.5301246 Thread:#1 SharpCap.Base.BaseImageProvider.OnStartCapture(IColourSpace colourSpaceControl, Size sz) :: Ended
Info: 11:14:34.5361363 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StartCapture
Info: 11:14:34.5411231 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StartCapture event received in UI thread
Info: 11:14:34.5779962 Thread:#1 SharpCap.Base.CaptureProviderBase`1.RunCapture() :: Ended
Verbose: 11:14:34.6009751 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 0
Error: 11:14:34.6299055 Thread:Capture Write Thread#27 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Exception of type InvalidOperationException from Writing frame : Data passed to WriteFrame is the wrong size
Stack Trace: at SharpCap.Base.FileWriters.SerFileWriter.WriteFrameImpl(FrameReference frameRef) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap.Base\FileWriters\SerFileWriter.cs:line 221
at SharpCap.Base.FileWriters.FileWriterBase.WriteFrame(FrameReference frame) in C:\Documents\Source Code\SharpCap3.2\src\SharpCap.Base\FileWriters\FileWriterBase.cs:line 140
at SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() in C:\Documents\Source Code\SharpCap3.2\src\SharpCap.Base\BaseImageProvider.cs:line 242
Info: 11:14:34.6518361 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:34.6518361 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 20 of type PreviousFrameNotProcessed
Info: 11:14:34.6518361 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DroppedBeforeTransform
Info: 11:14:34.6527967 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 5 of type NoLongerCapturing
Verbose: 11:14:34.8363511 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:35.0846909 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Info: 11:14:35.1395001 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:35.1405303 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 22 of type PreviousFrameNotProcessed
Info: 11:14:35.1405303 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DroppedBeforeTransform
Info: 11:14:35.1405303 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 35 of type NoLongerCapturing
Verbose: 11:14:35.3370109 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:35.5853057 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:35.8346630 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:36.0870061 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Info: 11:14:36.1158885 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:36.1158885 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 23 of type PreviousFrameNotProcessed
Info: 11:14:36.1158885 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DroppedBeforeTransform
Info: 11:14:36.1158885 Thread:Capture Write Thread#27 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 98 of type NoLongerCapturing
Verbose: 11:14:36.3373354 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:36.5966419 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:36.8469721 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:37.0942917 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:37.3476394 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:37.5979645 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Verbose: 11:14:37.8552780 Thread:#1 SharpCap.Models.Camera.SharpCap.Models.ICamera.GetProgressInfo() :: Captured frame count is 1
Debug: 11:14:37.9619900 Thread:#1 SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e) :: Button Pressed S&top Capture
Debug: 11:14:37.9958927 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Stopping capture on MultiCaptureProvider
at SharpCap.MultiCaptureProvider.StopCapture()
at SharpCap.Models.Camera.StopCaptureImpl()
at SharpCap.Models.Camera.StopCapture()
at SharpCap.ViewModels.SharpCapViewModel.<.ctor>b__5_6()
at SharpCap.UI.SharpCapForm.CommandToolStripItem_Click(Object sender, EventArgs e)
Info: 11:14:38.0048617 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StopCapture() :: Started
Info: 11:14:38.0128401 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StoppingCapture
Info: 11:14:38.0208304 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StoppingCapture event received in UI thread
Debug: 11:14:38.0288073 Thread:#1 SharpCap.Models.Camera.<ImplOnCaptureEvent>b__16_1() :: Status update after capture complete.
Debug: 11:14:38.0367869 Thread:#1 SharpCap.Base.BaseImageProvider.BeforeStopCapture() :: Started
Debug: 11:14:38.0447283 Thread:Capture Write Thread#27 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Ended (WriteFrames is false)
Debug: 11:14:38.0677092 Thread:#1 SharpCap.Base.BaseImageProvider.BeforeStopCapture() :: Ended
Info: 11:14:38.0796662 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : StopCapture
Debug: 11:14:38.0876509 Thread:#1 SharpCap.Models.Application.OnStopCapture() :: Started
Debug: 11:14:38.0966168 Thread:#1 SharpCap.Models.Application.OnStopCapture() :: Ended
Info: 11:14:38.1056031 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: StopCapture event received in UI thread
Info: 11:14:38.0726799 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 4 of type DS3TransformFrame
Info: 11:14:38.1125767 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 32 of type PreviousFrameNotProcessed
Info: 11:14:38.1125767 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 1 of type DroppedBeforeTransform
Info: 11:14:38.1125767 Thread:Grab Thread#13 SharpCap.Base.DroppedFrameLogger.Count(DroppedFrameType type, Int32 count) :: Dropped frames : 217 of type NoLongerCapturing
Info: 11:14:38.1125767 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.CygwinBinPathImpl() :: Using Unknown plate solver found at c:\cygwin\bin\
Info: 11:14:38.1355166 Thread:#1 SharpCap.ImageProcessing.AstroTortillaPlateSolver.IsAvailable() :: Plate solver not available
Debug: 11:14:38.1454862 Thread:#1 SharpCap.UI.SharpCapForm.OnStopCapture() :: Started
Debug: 11:14:38.1564607 Thread:#1 SharpCap.UI.SharpCapForm.OnStopCapture() :: Ended
Debug: 11:14:38.1664020 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StopCapture() :: StopCapture event sent
Info: 11:14:38.1734663 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StopCapture() :: Ended
- Attachments
-
- 3_2 with infinity.txt
- (43.28 KiB) Downloaded 151 times
-
- 2_9 with skynyx.txt
- (16.22 KiB) Downloaded 155 times
-
- 2_9 with infinity.txt
- (16.19 KiB) Downloaded 149 times
-
admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Thanks for sending the log files.
I can see the line that is reporting the error that is stopping you from capturing video – it's this one…
This means that the size of the image data that is being sent from the camera access code doesn't match the expected size given the camera resolution in use. This isn't something I've encountered before so I will have to look at the code to try and work out how this could happen and what might be done to fix it. I may need to send you an updated version of SharpCap that will record more information in the log file to help me work out more detail about what is going on.
Thanks, Robin
I can see the line that is reporting the error that is stopping you from capturing video – it's this one…
Code: Select all
Error: 11:14:34.6299055 Thread:Capture Write Thread#27 SharpCap.Base.BaseImageProvider.CaptureWriteThreadProc() :: Exception of type InvalidOperationException from Writing frame : Data passed to WriteFrame is the wrong size Thanks, Robin
Re: Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Thank you so much!
Antonio
Antonio
-
admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Hi,
I have uploaded a new version of SharpCap this evening that may help resolve this issue. Please can you give it a try when you get some time and do include an updated blog from the new version if you still have issues.
Cheers, Robin
I have uploaded a new version of SharpCap this evening that may help resolve this issue. Please can you give it a try when you get some time and do include an updated blog from the new version if you still have issues.
Cheers, Robin
Re: Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Thank you very much for all your support!
I installed latest version and apparently all problems are solved!
I attach a log file, obtained with the Infinity, for your consideration, but in a first test I have live image, can take snapshots and I am able to grab ser files (both with the 32 and 64 bit version).
My QSI 500 also links and works as an ASCOM camera, and I'm looking forward to be able to use my Canon 7D
Thanks again!
Antonio
I installed latest version and apparently all problems are solved!
I attach a log file, obtained with the Infinity, for your consideration, but in a first test I have live image, can take snapshots and I am able to grab ser files (both with the 32 and 64 bit version).
My QSI 500 also links and works as an ASCOM camera, and I'm looking forward to be able to use my Canon 7D
Thanks again!
Antonio
- Attachments
-
- SC3_3_5958 infinity.txt
- (33.99 KiB) Downloaded 154 times
-
admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Issue with Lumenera cameras and SharpCap 3.2.5949.0 64 or 32 bit (Pro license)
Hi,
That's great news – thanks for taking the time to report the bug and also to report back this successful resolution of the problem.
Cheers, Robin
That's great news – thanks for taking the time to report the bug and also to report back this successful resolution of the problem.
Cheers, Robin