Capture issues with QHY cameras
Posted: Sun Feb 10, 2019 8:37 pm
Hi Robin,
I have three QHY cameras: 168C, 183M, and 183C.
I am seeing frame capture become worse in the latest SharpCap version 3.2.5949 than 3.2.5906.
This behavior is with native mode.
In 3.2.5949, both 183M and 183C have 3.5 times longer exposure for all frames. For an example, if I specify the exposure of 30 sec, then the captured frames come with the exposure of 108 sec. In 3.2.5906, there was no over-exposure issue with 183M and 183C.
Both in 3.2.5949 and in 3.2.5906, 168C has twice longer exposure for the first frame. In 3.2.5906, 168C fixes this over-exposure with force still mode on. In 3.2.5949, SharpCap crashes with the force still mode on.
Thanks for your continuous effort in making SharpCap easy to use.
Insung
I have three QHY cameras: 168C, 183M, and 183C.
I am seeing frame capture become worse in the latest SharpCap version 3.2.5949 than 3.2.5906.
This behavior is with native mode.
In 3.2.5949, both 183M and 183C have 3.5 times longer exposure for all frames. For an example, if I specify the exposure of 30 sec, then the captured frames come with the exposure of 108 sec. In 3.2.5906, there was no over-exposure issue with 183M and 183C.
Both in 3.2.5949 and in 3.2.5906, 168C has twice longer exposure for the first frame. In 3.2.5906, 168C fixes this over-exposure with force still mode on. In 3.2.5949, SharpCap crashes with the force still mode on.
Thanks for your continuous effort in making SharpCap easy to use.
Insung