Hi Robin,
This relates to SharpCap V4.0.7859.0 64bit.
I was setting up a sequence using the basic Sequence Planner and I had setup 5 sequences for lights, dark's, flats etc. I had setup overridden values for gain and exposure and then saved the sequence for the basic view.
I then restarted SharpCap to test the loading of the sequence I saved and noticed that the overridden gain and exposure were not what I set them. All the sequence stages had reverted to a exposure of 1 sec and gain of 100.
I then went to advanced view by pressing the Advanced Edit button at the bottom of the basic view and saw that they were what I set them (gain 400, exposure 30sec, 0 sec etc) so the two views were not in sync.
Here is the basic sequence planner:
Here is the advanced one:
Is this intentional - have I missed a checkbox somewhere or is it a "feature".
Cheers
Phil
Sequence Planner - Basic vs Advanced have different settings
-
- Posts: 33
- Joined: Sat Sep 26, 2020 10:43 pm
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sequence Planner - Basic vs Advanced have different settings
Hi Phil,
it looks like a bug
I will investigate and hopefully have a fix by next week's update.
cheers,
Robin
it looks like a bug
I will investigate and hopefully have a fix by next week's update.
cheers,
Robin
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sequence Planner - Basic vs Advanced have different settings
Hi,
please try 4.0.7897 from https://www.sharpcap.co.uk/sharpcap-4-0-downloads - this will hopefully fix the problem.
thanks,
Robin
please try 4.0.7897 from https://www.sharpcap.co.uk/sharpcap-4-0-downloads - this will hopefully fix the problem.
thanks,
Robin