Sequence Planner - Basic vs Advanced have different settings

Discussions, Bug Reports and Issues related to Beta versions of SharpCap
Post Reply
philinbris
Posts: 33
Joined: Sat Sep 26, 2020 10:43 pm

Sequence Planner - Basic vs Advanced have different settings

#1

Post by philinbris »

Hi Robin,
This relates to SharpCap V4.0.7859.0 64bit.
I was setting up a sequence using the basic Sequence Planner and I had setup 5 sequences for lights, dark's, flats etc. I had setup overridden values for gain and exposure and then saved the sequence for the basic view.
I then restarted SharpCap to test the loading of the sequence I saved and noticed that the overridden gain and exposure were not what I set them. All the sequence stages had reverted to a exposure of 1 sec and gain of 100.
I then went to advanced view by pressing the Advanced Edit button at the bottom of the basic view and saw that they were what I set them (gain 400, exposure 30sec, 0 sec etc) so the two views were not in sync.

Here is the basic sequence planner:
sp1.jpg
sp1.jpg (125.83 KiB) Viewed 521 times
Here is the advanced one:
sp2.jpg
sp2.jpg (255.73 KiB) Viewed 521 times
Is this intentional - have I missed a checkbox somewhere or is it a "feature".

Cheers
Phil
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Sequence Planner - Basic vs Advanced have different settings

#2

Post by admin »

Hi Phil,

it looks like a bug :(

I will investigate and hopefully have a fix by next week's update.

cheers,

Robin
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Sequence Planner - Basic vs Advanced have different settings

#3

Post by admin »

Hi,

please try 4.0.7897 from https://www.sharpcap.co.uk/sharpcap-4-0-downloads - this will hopefully fix the problem.

thanks,

Robin
Post Reply