Extra File After Dither
Extra File After Dither
The latest beta 4.0.7806 produces an additional 1 second file after coming out of dither. The last version of 3.2 does not.
Rick
Rick
Re: Extra File After Dither
I have the same issue.
Colin
Colin
- admin
- Site Admin
- Posts: 13319
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Extra File After Dither
Hi,
Can I just confirm the context here? Live stacking with PHD2?
Do either of you have a log you can share?
cheers, Robin
Can I just confirm the context here? Live stacking with PHD2?
Do either of you have a log you can share?
cheers, Robin
Re: Extra File After Dither
PHD2 yes, dithering after every 3 to 5 min sub.
Don't have the log file but this is a problem that was occurring in an earlier version of 3.2 which I guess you cured. I was surprised to see it return.
It looks like the extra file is a 1 second long sub at the end of dither . If you have a dither flag set maybe don't reset it until a few seconds into the next regular sub > 1sec. Use that flag to suspend file saving.
Rick
Don't have the log file but this is a problem that was occurring in an earlier version of 3.2 which I guess you cured. I was surprised to see it return.
It looks like the extra file is a 1 second long sub at the end of dither . If you have a dither flag set maybe don't reset it until a few seconds into the next regular sub > 1sec. Use that flag to suspend file saving.
Rick
- admin
- Site Admin
- Posts: 13319
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Extra File After Dither
Hi Rick,
can you check the option setting in Live Stacking for 'Raw Frames' - if that is set to 'Save All' then what you are seeing is correct - the 1s frames get saved. For the other options the problem should not occur - it would be interesting to know what option you do have set.
cheers,
Robin
can you check the option setting in Live Stacking for 'Raw Frames' - if that is set to 'Save All' then what you are seeing is correct - the 1s frames get saved. For the other options the problem should not occur - it would be interesting to know what option you do have set.
cheers,
Robin
Re: Extra File After Dither
Stack except when paused/dithering
- admin
- Site Admin
- Posts: 13319
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Extra File After Dither
Ok, thanks, I will see if I can dig into this and understand what is going on.
cheers,
Robin
cheers,
Robin
Re: Extra File After Dither
Hi all,
I have exactly the same with 4 which didn't occur with 3.2. However it has never been a practical issue for me since I always use the brightness and FWHM filtering. The 1s frames always fail this hurdle - and therefore do not get saved. I save only the raw frames that are stacked.
TimH
I have exactly the same with 4 which didn't occur with 3.2. However it has never been a practical issue for me since I always use the brightness and FWHM filtering. The 1s frames always fail this hurdle - and therefore do not get saved. I save only the raw frames that are stacked.
TimH
- admin
- Site Admin
- Posts: 13319
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Extra File After Dither
Hi,
I let my setup run with PHD2 in simulator mode, dithering every 50s and a camera running 15s exposures for 3 hours yesterday and did not get *any* 1s frames saved...
Are you folks getting them intermittently or every dither? What length exposures are you using and what guiding periods do you have?
cheers,
Robin
I let my setup run with PHD2 in simulator mode, dithering every 50s and a camera running 15s exposures for 3 hours yesterday and did not get *any* 1s frames saved...
Are you folks getting them intermittently or every dither? What length exposures are you using and what guiding periods do you have?
cheers,
Robin