Sequencer: Hangs after "Live stack for x frames"

Discussions, Bug Reports and Issues related to Beta versions of SharpCap
Post Reply
User avatar
DocHighCo
Posts: 52
Joined: Wed Nov 18, 2020 2:20 pm

Sequencer: Hangs after "Live stack for x frames"

#1

Post by DocHighCo »

Dear Robin,

I found out that livestacking with the sequencers "Live stack for x frames" hangs sometimes when the "Save and Reset every y minutes" is hooked at the same time. Especially, when both end up with the same time. For example, if I call the sequencer script using 4 second frames with ""Live stack for 30 frames" then this results in a save every second minute. When at the same time "Save and Reset every 2 minutes" is hooked it seems that Sharpcap tries to do both and there is a conflict - it hangs up. When I unhook "Save and Reset every 2 minutes" then the sequence works fine. Maybe a call to "Live stack for x frames"should automatically disable the "Save and Reset every y minutes" condition to avoid this.
The version number is V4.0.7596 64bit.

Best Regards

Heiko
User avatar
admin
Site Admin
Posts: 13173
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Sequencer: Hangs after "Live stack for x frames"

#2

Post by admin »

Hi Heiko,

yes, I think you are correct - it should turn off the auto save when running from the sequencer. I will do that.

cheers,

Robin
Post Reply