SharpCap V3.2.5664 takes double time for exposures
SharpCap V3.2.5664 takes double time for exposures
I only noticed this when I took exposures of a few seconds with my lodestar. SharpCap has a green frame capture progression bar at the bottom right. Curiously, if I set exposures of say 5 seconds. I can see the green bar reaching its maximum after 5 seconds, but then there is another 5 seconds before the frame is displayed. Same for all exposure times apparently. Maybe I have something set incorrectly.
- admin
- Site Admin
- Posts: 13319
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: SharpCap V3.2.5664 takes double time for exposures
Hi,
yes, this is how it works for the lodestar - it's an interlaced camera, so to take a full resolution image you have to expose the sensor twice - once to capture the odd rows and once to capture the even. There is an option in the controls to change this behaviour - ie use 2x1 binning instead or interpolate from the even or odd rows.
cheers,
Robin
yes, this is how it works for the lodestar - it's an interlaced camera, so to take a full resolution image you have to expose the sensor twice - once to capture the odd rows and once to capture the even. There is an option in the controls to change this behaviour - ie use 2x1 binning instead or interpolate from the even or odd rows.
cheers,
Robin
Re: SharpCap V3.2.5664 takes double time for exposures
Yes. I discovered that just after I posted and then lost my internet. Must be the heat . I haven't seen any other app read the lodestar like that though (PHD, Nebulosity, Starlight Live). Thanks, Alan.