Can't get SVBony 305 to show up in SharpCap

Post Reply
gsxrraycer
Posts: 1
Joined: Fri Jul 31, 2020 11:16 pm

Can't get SVBony 305 to show up in SharpCap

#1

Post by gsxrraycer »

Hi.
new to the forum.

i just purchased the SVBony 305 camera and after installing sharpcap (64bit) and the drivers for windows, downloaded from SVBony website, i was unable to get any response from the camera.
The computer registered that the camera was plugged in, as the computer made the USB connection sound, but the camera did not show up in the selection drop down. I tried with the 2nd power USB plugged into my power tank, or not plugged in.

I get no response. thinking that it might be the camera, i've already returned one and this is the 2nd, and its doing the same thing.
making me think this is on my end. They were both purchased from Amazon.com

to make things more complicated I tried the installation on a second laptop with the same results.
The laptops are (1) i7 with 16 gb ram, (2) xenon quad core, 32 gb ram. so i'm pretty sure it's not the hardware.

thanks in advance
User avatar
admin
Site Admin
Posts: 13173
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Can't get SVBony 305 to show up in SharpCap

#2

Post by admin »

Hi,

try using the 32 bit version of SharpCap – SVBony have only given me a 32-bit version of their SDK, so the 64-bit version of SharpCap can't talk to the SV 305 camera.

Cheers, Robin
Post Reply