Atik ACIS 7.1 Mono Camera - Bug and Crash

User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#11

Post by admin »

Hi,

I suspect that your best bet would be to contact Atik support directly as you will probably get a faster response that way them with me passing messages backwards and forwards.

Cheers, Robin
leclercemj
Posts: 11
Joined: Wed Jun 10, 2020 6:46 pm

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#12

Post by leclercemj »

Hi,

I am agree, I will contact directly the ATIK support for the crash when the Bin is modified in high speed mode. It will be easier to exchange directly with ATIK support team :)
Do you know if the fact that the gain adjustment as no effect in high speed mode is linked to SharpCap or to the SDK. If it's link to the SDK, I need also to discuss that point with ATIK Support.

Thanks

Eric
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#13

Post by admin »

Hi Eric,

the gain problem might be the SDK or maybe I misunderstood something in it when I wrote my code. Unfortunatley I only have a CCD Atik camera at the moment, so I am unable to test anything to do with the gain or high speed mode :( I _think_ I got the gain right when I was getting things working with the Horizon2 (it was an important feature, so I tested it lots), but maybe the 7.1 is different somehow.

cheers,

Robin
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#14

Post by admin »

Hi,

I received some feedback from Atik suggesting you should run this application to turn on their debug mode by running

C:\Program Files (x86)\Atik Cameras\AtikCamerasDLLDebug\AtikCamerasDLLDebug.exe

And then clicking the 'Allow Debug' button. I suspect that you should leave this program open while you test SharpCap and then turn off the debug mode after you finish testing. Hopefully if you test SharpCap with debug mode active it will create the information that Atik were hoping to find in that folder. We can then pass that information on and hopefully get the problem fixed.

Thanks, Robin
leclercemj
Posts: 11
Joined: Wed Jun 10, 2020 6:46 pm

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#15

Post by leclercemj »

Hi Robin,

Thanks for these information.

I have started the AtikCameraDLLDebug software and do the following sequence:
The camera start in Bin1 and low speed

1- HS=>Bin2=>Gain 5=>Gain 0=>Bin1=> Crash
2- Bin2=>Bin1=>HS=>Bin2=> Crash

I have uploaded the file ATIK.zip (folder Atik in ProgramData). No new file detected in ASCOM.AtikCamera but in AtikCamerasDLL two new files are available in the Debug folder. One for each test. I hope these two files can help :).

Eric
Attachments
ATIK.zip
(70.18 KiB) Downloaded 96 times
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#16

Post by admin »

Hi,

That looks very promising – I will pass it on.

Cheers, Robin
leclercemj
Posts: 11
Joined: Wed Jun 10, 2020 6:46 pm

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#17

Post by leclercemj »

Hi,

Just a small update. With the last SharpCap version, the scale for the Gain and the Offset is now correctly displayed.
The Pad data problem is also solved.

Thanks for your help :)

Eric
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#18

Post by admin »

Hi Eric,

Glad to hear that those issues are fixed.

I've also heard back from Atik with some more information about the crash, although I'm not sure I fully understand it yet. I may put some more debugging information in to see if we can catch it failing and properly understand what is going wrong.

Cheers, Robin
leclercemj
Posts: 11
Joined: Wed Jun 10, 2020 6:46 pm

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#19

Post by leclercemj »

Hi Robin,

If needed, I can do more testing on my side with specific option in SharpCap or in the ATIK software.
For your information, the ATIK SDK was updated this week.

Eric
leclercemj
Posts: 11
Joined: Wed Jun 10, 2020 6:46 pm

Re: Atik ACIS 7.1 Mono Camera - Bug and Crash

#20

Post by leclercemj »

Hi,

Please find attached the new dump file.

Regards,

Eric
Attachments
SharpCap.zip
Dump
(689.27 KiB) Downloaded 89 times
Post Reply