Trouble with Zwo120 MC-s and polar alignment
Trouble with Zwo120 MC-s and polar alignment
I am using a zwo 120 MC-s 3.0 usb and their 30mm guide scope. It never seems to be able to plate solve. I switch to PHD 2 and the setup works with their polar static tool. I can seem to figure out what I need to set in Sharpcap to match the PHD 2 program so I can get the camera to work. I am guessing PHD 2 must be using a black and white setting. I am new to all of this so any advice would be a great deal of help. PS I the camera worked on a 60mm Svbony guide scope and sharpcap on my C5 setup. Thanks in advance.
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Trouble with Zwo120 MC-s and polar alignment
Hi,
did you try following the troubleshooting steps? There are lots of hints and suggestions - see https://docs.sharpcap.co.uk/4.0/#Troubl ... 0Alignment
cheers,
Robin
did you try following the troubleshooting steps? There are lots of hints and suggestions - see https://docs.sharpcap.co.uk/4.0/#Troubl ... 0Alignment
cheers,
Robin
Re: Trouble with Zwo120 MC-s and polar alignment
I did not will start there. I also down loaded an updated driver from earlier this month. Thanks for the suggestion.