ASI294MM-Pro Bin 2 Sensor Analysis

Post Reply
Muggsie
Posts: 2
Joined: Mon Dec 14, 2020 1:31 am

ASI294MM-Pro Bin 2 Sensor Analysis

#1

Post by Muggsie »

I need some help on how to run the sensor analysis for Bin2 on an ASI294MM-Pro since the sensor program restricts to Bin1 only. I read in a prior message that an update might be released that would use the color space selection to select Bin2 behind the scenes. I just downloaded the latest version 3.2.6473.0 and there does not yet appear to be a way to do this. Is there a way to run Bin2 yet ?
User avatar
admin
Site Admin
Posts: 13122
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: ASI294MM-Pro Bin 2 Sensor Analysis

#2

Post by admin »

Hi,

sorry, no way to do this yet - it's still on my TODO list and will also end up in SharpCap 3.3, not 3.2 (3.3 is in beta testing right now).

cheers,

Robin
Muggsie
Posts: 2
Joined: Mon Dec 14, 2020 1:31 am

Re: ASI294MM-Pro Bin 2 Sensor Analysis

#3

Post by Muggsie »

OK - thanks for the update.
tristarcapt
Posts: 1
Joined: Wed Sep 11, 2019 8:25 pm

Re: ASI294MM-Pro Bin 2 Sensor Analysis

#4

Post by tristarcapt »

Any update/progress on this yet? Just got my ASI294mm-p a couple a days ago and tried a sensor analysis and it wouldn't let me do it in normal bin 2x2 mode.

Scott
User avatar
admin
Site Admin
Posts: 13122
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: ASI294MM-Pro Bin 2 Sensor Analysis

#5

Post by admin »

Hi,

this should be fine in SharpCap 4.0 - 4.0 makes a separate 'read mode' control available to switch between 11 and 47 megapixel modes, allowing sensor analysis in both. You can set bin 1 and 3 in 47 megapixel, 1 and 2 in 11 megapixel - the combinations together actually use bin 1, 2, 3 and 4 on the camera side.

cheers,

Robin
Post Reply