Native Driver Not Used

Post Reply
Farzad_K
Posts: 12
Joined: Sun May 05, 2019 6:09 pm

Native Driver Not Used

#1

Post by Farzad_K »

Hi.

I have installed SC 3.1 and have the latest ASCOM and native drivers for ZWO ASI cameras. When I start a SC session I only have access to the ASCOM drivers in the camera dropdown. When I choose the ASCOm driver SC tells me it can do a better job if I use the native driver. It is installed, and I don't know how to point SC to that driver.

Any thoughts?

Thanks a lot.

Farzad
BlackWikkett
Posts: 387
Joined: Sat Jun 23, 2018 8:48 pm
Contact:

Re: Native Driver Not Used

#2

Post by BlackWikkett »

Hi Farzad_K

Have a look at https://www.sharpcap.co.uk/sharpcap/downloads and download the latest SharpCap version 3.2.6377 Also make sure you have the latest ZWO driver version 3.0.0.8 found here https://astronomy-imaging-camera.com/software-drivers

-Chris
Farzad_K
Posts: 12
Joined: Sun May 05, 2019 6:09 pm

Re: Native Driver Not Used

#3

Post by Farzad_K »

Thanks, Chris. This did it. I am now able to see the actual ASI294 listed and can select it.

Farzad
Post Reply