Page 1 of 1

Qhy183c & m LIVE BROADCAST NOT WORKING

Posted: Sat Nov 24, 2018 3:30 am
by Sunil
Hi all members ,ROBIN sir.
I have 2 qhy183C,M / camera .
I have new laptop .lenovo ideapad 330.i5 8th gen,window 10 pro 64 bit .
I have installed all drivers about QHY183M CAMERA.
I am using facebook in google chrome .
My setting about live transmission .
1 - open sharpcap
2- select qhy183m camera
3- enable live broadcadt ( feature )
4- login facebook in google chrome
5- go to live in facebook
6- camera & mic
7- show only internal webcam .
Qhy183m camera not showing .
I reinstall 2 time my window 10 & pro but not solve my problem.
I dont know where is the problem.
My laptop
My camera or driver .
I am purchase new laptop about live broadcast fb & youtube .
Thanks all member

Re: Qhy183c & m LIVE BROADCAST NOT WORKING

Posted: Sat Nov 24, 2018 3:47 pm
by admin
Hi,

I don't have the same camera to test with, but I can make this work with my QHY 178C. I had to install the latest version of the broadcast software QHY website and then a new camera appears in the list as shown in the image below. When I select this camera in SharpCap or another capture application it mirrors as expected the image captured using the main version of SharpCap.
press.JPG
press.JPG (34.88 KiB) Viewed 3103 times
Oddly, this didn't work the first time I tried but did after I had uninstalled and completely reinstalled the broadcast driver.

Cheers, Robin

Re: Qhy183c & m LIVE BROADCAST NOT WORKING

Posted: Sun Nov 25, 2018 7:25 am
by Sunil
hi robin thankyou your reply .but my problem not solve. i reinstall my window10 pro & all driver. any other solution

Re: Qhy183c & m LIVE BROADCAST NOT WORKING

Posted: Sun Nov 25, 2018 8:56 pm
by admin
Hi,

sorry, but if you have installed the live broadcast software from QHY, then as far as I know it should work. I have no idea if this is supported or not with your model of camera though. You may want to ask on the QHY forums to see if they have any suggestions as this functionality is provided through their software and SharpCap only makes the on/off switch available.

Cheers, Robin

Re: Qhy183c & m LIVE BROADCAST NOT WORKING

Posted: Mon Nov 26, 2018 2:08 am
by Sunil
IMG-20181126-WA0001.jpg
IMG-20181126-WA0001.jpg (40.41 KiB) Viewed 3069 times
Hi Robin .i am install all driver for my QHY183Mm camera like- NATIVE WDM ,BRODCAST ,ASCOM 3 IN 1 ,CAMERA DRIVER.MY BOTH CAMERA SUPPORT (QHY183C,QHY183M) LIVE BRODCASTING .I AM TRY MANY TIME IN FACEBOOK .
https://m.facebook.com/story.php?story_ ... 0200360623

Thankyou
Sunil

Re: Qhy183c & m LIVE BROADCAST NOT WORKING

Posted: Fri Mar 01, 2024 10:32 pm
by dridge3770
I spent three plus hours on the "remote support" line with QHY with a similar problem -- I was not able to get MetaGuide to see any signal from the QHY5III178C guide camera. It needs to serve MetaGuide with an SER file format but it can only serve the WDM Broadcast with either RAW8 or RGB24! And set up a second instance of SharpCap to function as the guide camera controller. So that's what fixed the problem for me -- SER and RAW8. Of course, have the Broadcast Enabled in the camera parameters.

Whew!