error PGR chameleon CMLN-13S2M

gladstone1969
Posts: 14
Joined: Sat Jan 06, 2018 8:18 pm

Re: error PGR chameleon CMLN-13S2M

Post by gladstone1969 » Sun Jan 21, 2018 9:15 pm

Robin,

So spent some time trouble shooting this. (1) I updated all of the firmware on my camera. (2) I downloaded the Latest FlyCapture II Full SDK. The first one I downloaded was 64 bit - but I got an error in the log that said something about needing 32 bit. So I downloaded the 32 bit version. That got me further. I can now see my camera in the selection menu along with a general PGR camera. Here is the log when I chose the general PGR camera (below it I show what happened when I chose the specific Chameleon3 camera)... I've also posted both "error" windows at the bottom of this message.

Info: 15:51:25.0572109 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: SharpCap Version 3.1.4965.0
Info: 15:51:25.0572109 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: GC Memory 85Mb
Info: 15:51:25.0572109 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Process Memory 115Mb
Info: 15:51:25.0572109 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Total Physical Memory 8094Mb
Info: 15:51:25.0572109 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Available Physical Memory 5878Mb
Info: 15:51:25.0572109 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Operating System : Microsoft Windows NT 6.2.9200.0
Debug: 15:51:25.1215919 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Started
Info: 15:51:25.1574300 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type BaslerDeviceEnumerator
Info: 15:51:25.1574300 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type QHYDeviceEnumerator
Info: 15:51:25.1574300 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type ASIDeviceEnumerator
Info: 15:51:25.1574300 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AltairDeviceEnumerator
Info: 15:51:25.1957783 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type PointGreyDeviceEnumerator
Info: 15:51:25.1957783 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type SxDeviceEnumerator
Info: 15:51:25.2138121 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type DS3DeviceEnumerator
Info: 15:51:25.2138121 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AscomDeviceEnumerator

Info: 15:51:25.8595556 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Parent being changed on PreviewPanel
at SharpCap.UI.ScrollZoomForm.OnParentChanged(Object sender, EventArgs eventArgs)
at System.EventHandler.Invoke(Object sender, EventArgs e)
Debug: 15:51:25.9189379 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Ended
Debug: 15:51:25.9953136 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Started
Debug: 15:51:26.0133190 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Ended
Debug: 15:51:26.0443303 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Started
Info: 15:51:26.0963490 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: CPU : Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz with 8 cores.
Debug: 15:51:27.6440975 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Timebomb checked
Debug: 15:51:27.6561018 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Started
Info: 15:51:27.6651062 Thread:#18 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: FindCameras - found 0 cameras
Info: 15:51:27.6781098 Thread:#16 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: ASCOM Camera Driver for PGR. (ASCOM Cameras)
Info: 15:51:27.6791106 Thread:#16 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Camera V2 simulator (ASCOM Cameras)
Debug: 15:51:27.6791106 Thread:#16 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Started
Debug: 15:51:27.6791106 Thread:#16 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Ended
Info: 15:51:27.6791106 Thread:#16 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras)
Info: 15:51:27.6801107 Thread:#16 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 2 (High Speed) (Test Cameras)
Info: 15:51:27.6941154 Thread:#18 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: IMG0H(Native WDM) (DirectShow Cameras via SharpCap Pipeline)
Info: 15:51:27.6941154 Thread:#18 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Point Grey Camera (DirectShow Cameras via SharpCap Pipeline)
Debug: 15:51:27.6991169 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Ended
Info: 15:51:27.7081206 Thread:#20 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Chameleon3 CM3-U3-13S2M (PointGrey Cameras)
Info: 15:51:27.7471335 Thread:#7 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: QHYCameraFinder - found 0 cameras
Debug: 15:51:27.8371659 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Docking setup
Debug: 15:51:27.8371659 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Startup scripts (if any) run
Debug: 15:51:27.8381659 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Menu updated
Debug: 15:51:29.0120392 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Splash and tips done
Debug: 15:51:29.0372350 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Ended
Info: 15:51:32.7475357 Thread:#1 SharpCap.Models.Application+<>c__DisplayClass36_0.<set_SelectedCamera>b__0() :: Changing camera from none to Point Grey Camera
Info: 15:51:32.7920258 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: OpeningDevice event received in UI thread
Debug: 15:51:32.8010291 Thread:#1 SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag) :: Opening device : Point Grey Camera (via DirectShow Cameras via SharpCap Pipeline)
Info: 15:51:32.8080319 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Started
Debug: 15:51:32.8080319 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Started
Debug: 15:51:34.3002837 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Ended
Info: 15:51:34.3063733 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() :: Started
Debug: 15:51:34.3073734 Thread:#1 SharpCap.Base.SimpleCaptureProvider.GetControls() :: Started
Info: 15:51:34.5215990 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetPinControls() :: IAMStreamConfig interface not supplied - no pin controls will be available
Info: 15:51:34.5225991 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetCameraControls() :: Camera controls being added via native IAMCameraControl
Info: 15:51:34.5306019 Thread:#1 SharpCap.Cameras.NewDirectShow.CaptureControlFactory.GetProcAmpControls() :: Proc Amp controls being added via native IAMVideoProcAmp
Error: 15:51:34.5513546 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from Opening Camera : This camera does not provide control over resolution and colour space. It cannot be controlled using the SharpCap Image Pipeline. Please try selecting the DirectShow Image Pipeline in the Settings Dialog.
Stack Trace: at SharpCap.Cameras.DS3.DS3CameraProxy.GetControlsImpl(IPreviewControl previewControl) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.DS3\DS3CameraProxy.cs:line 130
at SharpCap.Base.CameraProxyBase.GetControls(IPreviewControl previewControl) in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CameraProxyBase.cs:line 164
at SharpCap.Base.BaseImageProvider.GetControls(IPreviewControl previewControl) in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\BaseImageProvider.cs:line 622
at SharpCap.Base.SimpleCaptureProvider.GetControls() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\SimpleCaptureProvider.cs:line 104
at SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CaptureProviderBase.cs:line 404
at SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CaptureProviderBase.cs:line 888
at SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag) in C:\Documents\Source Code\SharpCap\src\SharpCap\Models\MultiCaptureProvider.cs:line 283
at SharpCap.Models.Camera.OpenDevice() in C:\Documents\Source Code\SharpCap\src\SharpCap\Models\Camera.cs:line 863


*********
When I tried the specific Chameleon3 camera - this is the log file I get:


Info: 16:04:15.5107730 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: SharpCap Version 3.1.4965.0
Info: 16:04:15.5117731 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: GC Memory 85Mb
Info: 16:04:15.5167750 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Process Memory 115Mb
Info: 16:04:15.5167750 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Total Physical Memory 8094Mb
Info: 16:04:15.5167750 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Available Physical Memory 5794Mb
Info: 16:04:15.5167750 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: Operating System : Microsoft Windows NT 6.2.9200.0
Debug: 16:04:15.5663135 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Started
Info: 16:04:15.5980431 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type BaslerDeviceEnumerator
Info: 16:04:15.5980431 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type QHYDeviceEnumerator
Info: 16:04:15.5990436 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type ASIDeviceEnumerator
Info: 16:04:15.5990436 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AltairDeviceEnumerator
Info: 16:04:15.6261834 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type PointGreyDeviceEnumerator
Info: 16:04:15.6261834 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type SxDeviceEnumerator
Info: 16:04:15.6353503 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type DS3DeviceEnumerator
Info: 16:04:15.6353503 Thread:#1 SharpCap.MultiCaptureProvider.AddProvider() :: Added device enumerator of type AscomDeviceEnumerator

Info: 16:04:16.1127818 Thread:#1 SharpCap.Base.Utilities.Logger.LogStackTrace(LogLevel level, String msg) :: Parent being changed on PreviewPanel
at SharpCap.UI.ScrollZoomForm.OnParentChanged(Object sender, EventArgs eventArgs)
at System.EventHandler.Invoke(Object sender, EventArgs e)
Debug: 16:04:16.1525565 Thread:#1 SharpCap.UI.SharpCapForm..ctor() :: Ended
Debug: 16:04:16.2164954 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Started
Debug: 16:04:16.2335027 Thread:#1 SharpCap.UI.SharpCapForm.SharpCapForm_Load(Object sender, EventArgs e) :: Ended
Debug: 16:04:16.2655128 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Started
Info: 16:04:16.5656189 Thread:LogInfo Thread#8 SharpCap.LogSystemInfo.ThreadProc() :: CPU : Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz with 8 cores.
Debug: 16:04:18.9750489 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Timebomb checked
Debug: 16:04:18.9919385 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Started
Info: 16:04:19.0059436 Thread:#10 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: FindCameras - found 0 cameras
Info: 16:04:19.0209492 Thread:#18 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: ASCOM Camera Driver for PGR. (ASCOM Cameras)
Info: 16:04:19.0209492 Thread:#18 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Camera V2 simulator (ASCOM Cameras)
Debug: 16:04:19.0219493 Thread:#18 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Started
Debug: 16:04:19.0219493 Thread:#18 SharpCap.Cameras.Fake.FakeDeviceEnumerator.GetDevices() :: Ended
Info: 16:04:19.0219493 Thread:#18 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras)
Info: 16:04:19.0219493 Thread:#18 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Test Camera 2 (High Speed) (Test Cameras)
Info: 16:04:19.0339555 Thread:#10 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: IMG0H(Native WDM) (DirectShow Cameras via SharpCap Pipeline)
Info: 16:04:19.0339555 Thread:#10 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Point Grey Camera (DirectShow Cameras via SharpCap Pipeline)
Debug: 16:04:19.0439565 Thread:#1 SharpCap.Cameras.Basler.BaslerDeviceEnumerator.GetDevices() :: Ended
Info: 16:04:19.0451999 Thread:#20 SharpCap.MultiCaptureProvider+<GetDevicesFromEnumerator>d__20.MoveNext() :: Detected Camera: Chameleon3 CM3-U3-13S2M (PointGrey Cameras)
Info: 16:04:19.0906024 Thread:#16 SharpCap.Base.SimpleDeviceEnumerator.GetDevices(Func`1 deviceNameFinder, String infoText, Func`2 fullNameToDispayName, Func`3 tagCreatorFunc) :: QHYCameraFinder - found 0 cameras
Debug: 16:04:19.1848144 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Docking setup
Debug: 16:04:19.1858145 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Startup scripts (if any) run
Debug: 16:04:19.1858145 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Menu updated
Debug: 16:04:21.2982381 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Splash and tips done
Debug: 16:04:21.3322496 Thread:#1 SharpCap.UI.SharpCapForm.SharpCap_Shown(Object sender, EventArgs e) :: Ended
Info: 16:04:25.0912634 Thread:#1 SharpCap.Models.Application+<>c__DisplayClass36_0.<set_SelectedCamera>b__0() :: Changing camera from none to Chameleon3 CM3-U3-13S2M
Info: 16:04:25.1274038 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: OpeningDevice event received in UI thread
Debug: 16:04:25.1295611 Thread:#1 SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag) :: Opening device : Chameleon3 CM3-U3-13S2M (via PointGrey Cameras)
Info: 16:04:25.1295611 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Started
Debug: 16:04:25.1295611 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Started
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode2
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode3
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode4
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode6
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode7
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode8
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode9
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode10
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode11
Info: 16:04:25.1608111 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode12
Info: 16:04:25.1765117 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode13
Info: 16:04:25.1775117 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode14
Info: 16:04:25.1775117 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode15
Info: 16:04:25.1785118 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode16
Info: 16:04:25.1795119 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode17
Info: 16:04:25.1805119 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode18
Info: 16:04:25.1815120 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode19
Info: 16:04:25.1815120 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode20
Info: 16:04:25.1825124 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode21
Info: 16:04:25.1835129 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode22
Info: 16:04:25.1835129 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode23
Info: 16:04:25.1845129 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode24
Info: 16:04:25.1845129 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode25
Info: 16:04:25.1855134 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode26
Info: 16:04:25.1865138 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode27
Info: 16:04:25.1865138 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode28
Info: 16:04:25.1875143 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode29
Info: 16:04:25.1885143 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode30
Info: 16:04:25.1885143 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper.GetFormat7Info(Mode mode) :: Format7 not supported in mode Mode31
Debug: 16:04:25.1895148 Thread:#1 SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) :: Ended
Info: 16:04:25.1945167 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() :: Started
Debug: 16:04:25.1955171 Thread:#1 SharpCap.Base.SimpleCaptureProvider.GetControls() :: Started
Info: 16:04:25.2185252 Thread:#1 SharpCap.Cameras.PointGrey.CameraModeHelperBase+<GetPixelFormats>d__2.MoveNext() :: PixelFormatBits: 84140000, VendorPixelFormats: 0
Info: 16:04:25.2195256 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper+<GetColourSpaces>d__9.MoveNext() :: Camera supports Mono, BitDepth=8, ColorPlanes=1, EffectiveBitDepth=8, BytesPerPixel=1 via Fmt7
Info: 16:04:25.2195256 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper+<GetColourSpaces>d__9.MoveNext() :: Camera supports Mono, BitDepth=12, ColorPlanes=1, EffectiveBitDepth=12, BytesPerPixel=2 via Fmt7
Info: 16:04:25.2195256 Thread:#1 SharpCap.Cameras.PointGrey.Format7Helper+<GetColourSpaces>d__9.MoveNext() :: Camera supports Mono, BitDepth=16, ColorPlanes=1, EffectiveBitDepth=16, BytesPerPixel=2 via Fmt7
Info: 16:04:25.2225266 Thread:#1 SharpCap.Base.ColourSpacePropertyControl..ctor(IEnumFeature mainFeature, List`1 colourSpaces, IPreviewControl previewControl) :: Colour space MONO8 is valid.
Info: 16:04:25.2225266 Thread:#1 SharpCap.Base.ColourSpacePropertyControl..ctor(IEnumFeature mainFeature, List`1 colourSpaces, IPreviewControl previewControl) :: Colour space MONO12 is valid.
Info: 16:04:25.2225266 Thread:#1 SharpCap.Base.ColourSpacePropertyControl..ctor(IEnumFeature mainFeature, List`1 colourSpaces, IPreviewControl previewControl) :: Colour space MONO16 is valid.
Info: 16:04:25.3298381 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CreateCaptureControl() :: Ended
Info: 16:04:25.3298381 Thread:#1 SharpCap.Base.CaptureProviderBase`1.OpenDevice(DeviceTagData dtd) :: Ended
Debug: 16:04:25.3298381 Thread:#1 SharpCap.Models.Camera.ApplyDefaultProfile() :: Started
Debug: 16:04:25.3298381 Thread:#1 SharpCap.Models.Camera.ApplyDefaultProfile() :: Ended (No default defined for this camera)
Info: 16:04:25.3298381 Thread:#1 SharpCap.MultiCaptureProvider.StartPreview() :: Starting preview on Chameleon3 CM3-U3-13S2M
Info: 16:04:25.3416160 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Started
Info: 16:04:25.3476179 Thread:#1 SharpCap.Base.CaptureProviderBase`1.StartPreview() :: Starting Preview on Chameleon3 CM3-U3-13S2M, 1288x964, Mono, 8bits
Debug: 16:04:25.3526198 Thread:#1 SharpCap.Base.BaseImageProvider.Start() :: Started
Debug: 16:04:25.3586221 Thread:#1 SharpCap.Base.CameraProxyBase.StartPreview() :: Started
Debug: 16:04:25.3596221 Thread:Grab Thread#24 SharpCap.Base.CameraProxyBase.GrabThreadProc() :: Started
Info: 16:04:25.3726264 Thread:#1 SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap() :: Paged memory check based on total memory of 8094Mb, available of 5741Mb
Info: 16:04:25.3726264 Thread:#1 SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap() :: Paged memory enabled at 2048Mb on 64 bit system.
Info: 16:04:25.3736269 Thread:#1 SharpCap.Base.Memory.Allocator..cctor() :: Assigning 1024Mb to non-pool memory and 1024Mb to the frame pool.
Info: 16:04:25.3846307 Thread:Grab Thread#24 SharpCap.Cameras.PointGrey.Format7Helper.TraceFormat7Settings(Format7ImageSettings settings) :: pixelFormat : PixelFormatMono8
Info: 16:04:25.3846307 Thread:Grab Thread#24 SharpCap.Cameras.PointGrey.Format7Helper.TraceFormat7Settings(Format7ImageSettings settings) :: mode : Mode7
Info: 16:04:25.3846307 Thread:Grab Thread#24 SharpCap.Cameras.PointGrey.Format7Helper.TraceFormat7Settings(Format7ImageSettings settings) :: width : 1288
Info: 16:04:25.3846307 Thread:Grab Thread#24 SharpCap.Cameras.PointGrey.Format7Helper.TraceFormat7Settings(Format7ImageSettings settings) :: height : 964
Info: 16:04:25.3846307 Thread:Grab Thread#24 SharpCap.Cameras.PointGrey.Format7Helper.TraceFormat7Settings(Format7ImageSettings settings) :: offsetX : 0
Info: 16:04:25.3846307 Thread:Grab Thread#24 SharpCap.Cameras.PointGrey.Format7Helper.TraceFormat7Settings(Format7ImageSettings settings) :: offsetY : 0
Error: 16:04:25.3876320 Thread:Grab Thread#24 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from The Mode7 parameters that were generated were invalid : Error setting Format 7 information. : Error setting Format 7 information.
Stack Trace: at FlyCapture2Managed.ManagedCamera.ValidateFormat7Settings(Format7ImageSettings imageSettings, Boolean& settingsAreValid)
at SharpCap.Cameras.PointGrey.Format7Helper.GetPacketInfoForSettings(ManagedCamera camera, Format7ImageSettings settings) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 194
Error: 16:04:25.3896333 Thread:Grab Thread#24 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from Setting up grab thread : Error setting Format 7 information.
Stack Trace: at SharpCap.Cameras.PointGrey.CameraModeHelperBase.ReportError(String errorMessage, Exception p1) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\CameraModeHelperBase.cs:line 15
at SharpCap.Cameras.PointGrey.Format7Helper.GetPacketInfoForSettings(ManagedCamera camera, Format7ImageSettings settings) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 200
at SharpCap.Cameras.PointGrey.Format7Helper.ApplyF7Settings(Nullable`1 size, Nullable`1 pixelFormat, Nullable`1 offsetX, Nullable`1 offsetY) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 159
at SharpCap.Cameras.PointGrey.Format7Helper.Setup(Size size, IColourSpace colourSpace) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 99
at SharpCap.Cameras.PointGrey.PointGreyCameraProxy.SetupGrabThread() in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\PointGreyCameraProxy.cs:line 248
at SharpCap.Base.CameraProxyBase.GrabThreadProc() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CameraProxyBase.cs:line 336
Error: 16:04:25.3906330 Thread:Grab Thread#24 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : FlyCapture2Managed.FC2Exception: Error setting Format 7 information.
at FlyCapture2Managed.ManagedCamera.ValidateFormat7Settings(Format7ImageSettings imageSettings, Boolean& settingsAreValid)
at SharpCap.Cameras.PointGrey.Format7Helper.GetPacketInfoForSettings(ManagedCamera camera, Format7ImageSettings settings) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 194
Error: 16:04:25.3946340 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from Capture Provider Exception : Camera failed to start
Stack Trace: at SharpCap.Base.CameraProxyBase.StartPreview() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CameraProxyBase.cs:line 148
at SharpCap.Base.BaseImageProvider.Start() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\BaseImageProvider.cs:line 391
at SharpCap.Base.CaptureProviderBase`1.StartFramesRunnng() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CaptureProviderBase.cs:line 903
at SharpCap.Base.CaptureProviderBase`1.StartPreview() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CaptureProviderBase.cs:line 489
Error: 16:04:25.3946340 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : System.InvalidOperationException: Error setting Format 7 information. ---> FlyCapture2Managed.FC2Exception: Error setting Format 7 information.
at FlyCapture2Managed.ManagedCamera.ValidateFormat7Settings(Format7ImageSettings imageSettings, Boolean& settingsAreValid)
at SharpCap.Cameras.PointGrey.Format7Helper.GetPacketInfoForSettings(ManagedCamera camera, Format7ImageSettings settings) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 194
--- End of inner exception stack trace ---
at SharpCap.Cameras.PointGrey.CameraModeHelperBase.ReportError(String errorMessage, Exception p1) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\CameraModeHelperBase.cs:line 15
at SharpCap.Cameras.PointGrey.Format7Helper.GetPacketInfoForSettings(ManagedCamera camera, Format7ImageSettings settings) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 200
at SharpCap.Cameras.PointGrey.Format7Helper.ApplyF7Settings(Nullable`1 size, Nullable`1 pixelFormat, Nullable`1 offsetX, Nullable`1 offsetY) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 159
at SharpCap.Cameras.PointGrey.Format7Helper.Setup(Size size, IColourSpace colourSpace) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 99
at SharpCap.Cameras.PointGrey.PointGreyCameraProxy.SetupGrabThread() in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\PointGreyCameraProxy.cs:line 248
at SharpCap.Base.CameraProxyBase.GrabThreadProc() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CameraProxyBase.cs:line 336
Error: 16:04:25.3946340 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : FlyCapture2Managed.FC2Exception: Error setting Format 7 information.
at FlyCapture2Managed.ManagedCamera.ValidateFormat7Settings(Format7ImageSettings imageSettings, Boolean& settingsAreValid)
at SharpCap.Cameras.PointGrey.Format7Helper.GetPacketInfoForSettings(ManagedCamera camera, Format7ImageSettings settings) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 194
Error: 16:04:25.3996359 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Exception from Opening Camera : Camera failed to start
Stack Trace: at SharpCap.Base.CameraProxyBase.StartPreview() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CameraProxyBase.cs:line 148
at SharpCap.Base.BaseImageProvider.Start() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\BaseImageProvider.cs:line 391
at SharpCap.Base.CaptureProviderBase`1.StartFramesRunnng() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CaptureProviderBase.cs:line 903
at SharpCap.Base.CaptureProviderBase`1.StartPreview() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CaptureProviderBase.cs:line 496
at SharpCap.MultiCaptureProvider.StartPreview() in C:\Documents\Source Code\SharpCap\src\SharpCap\Models\MultiCaptureProvider.cs:line 389
at SharpCap.Models.Camera.<StartPreview>b__72_0() in C:\Documents\Source Code\SharpCap\src\SharpCap\Models\Camera.cs:line 420
at SharpCap.Utils.ExtensionMethods.<>c__DisplayClass10_0.<RunSyncInUIThread>b__0() in C:\Documents\Source Code\SharpCap\src\SharpCap\Utils\ExtensionMethods.cs:line 119
at SharpCap.Utils.ExtensionMethods.RunSyncInUIThread[T](DispatcherObject target, Func`1 action) in C:\Documents\Source Code\SharpCap\src\SharpCap\Utils\ExtensionMethods.cs:line 128
at SharpCap.Utils.ExtensionMethods.RunSyncInUIThread(DispatcherObject target, Action action) in C:\Documents\Source Code\SharpCap\src\SharpCap\Utils\ExtensionMethods.cs:line 117
at SharpCap.Models.Camera.StartPreview() in C:\Documents\Source Code\SharpCap\src\SharpCap\Models\Camera.cs:line 438
at SharpCap.Models.Camera.StartPreviewOnSelectedDeviceLoadingDefaultProfile() in C:\Documents\Source Code\SharpCap\src\SharpCap\Models\Camera.cs:line 781
at SharpCap.Models.Camera.OpenDevice() in C:\Documents\Source Code\SharpCap\src\SharpCap\Models\Camera.cs:line 865
Error: 16:04:25.3996359 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : System.InvalidOperationException: Error setting Format 7 information. ---> FlyCapture2Managed.FC2Exception: Error setting Format 7 information.
at FlyCapture2Managed.ManagedCamera.ValidateFormat7Settings(Format7ImageSettings imageSettings, Boolean& settingsAreValid)
at SharpCap.Cameras.PointGrey.Format7Helper.GetPacketInfoForSettings(ManagedCamera camera, Format7ImageSettings settings) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 194
--- End of inner exception stack trace ---
at SharpCap.Cameras.PointGrey.CameraModeHelperBase.ReportError(String errorMessage, Exception p1) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\CameraModeHelperBase.cs:line 15
at SharpCap.Cameras.PointGrey.Format7Helper.GetPacketInfoForSettings(ManagedCamera camera, Format7ImageSettings settings) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 200
at SharpCap.Cameras.PointGrey.Format7Helper.ApplyF7Settings(Nullable`1 size, Nullable`1 pixelFormat, Nullable`1 offsetX, Nullable`1 offsetY) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 159
at SharpCap.Cameras.PointGrey.Format7Helper.Setup(Size size, IColourSpace colourSpace) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 99
at SharpCap.Cameras.PointGrey.PointGreyCameraProxy.SetupGrabThread() in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\PointGreyCameraProxy.cs:line 248
at SharpCap.Base.CameraProxyBase.GrabThreadProc() in C:\Documents\Source Code\SharpCap\src\SharpCap.Base\CameraProxyBase.cs:line 336
Error: 16:04:25.3996359 Thread:#1 SharpCap.Base.Utilities.Logger.Error(Exception e, String action, String additionalInfo, Boolean stackTrace) :: Inner Exception : FlyCapture2Managed.FC2Exception: Error setting Format 7 information.
at FlyCapture2Managed.ManagedCamera.ValidateFormat7Settings(Format7ImageSettings imageSettings, Boolean& settingsAreValid)
at SharpCap.Cameras.PointGrey.Format7Helper.GetPacketInfoForSettings(ManagedCamera camera, Format7ImageSettings settings) in C:\Documents\Source Code\SharpCap\src\SharpCap.Cameras.PointGrey\Mode7Helper.cs:line 194
Info: 16:04:31.5857105 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CloseDevice() :: Started
Debug: 16:04:31.5857105 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CloseTheImageProvider() :: Started
Debug: 16:04:31.5857105 Thread:#1 SharpCap.Base.BaseImageProvider.Close() :: Started
Debug: 16:04:31.5867106 Thread:#1 SharpCap.Base.BaseImageProvider.Stop() :: Started
Debug: 16:04:31.5877107 Thread:#1 SharpCap.Base.BaseImageProvider.Stop() :: Ended
Info: 16:04:31.5877107 Thread:#1 SharpCap.Base.CameraProxyBase.Dispose(Boolean disposing) :: Started
Debug: 16:04:31.5887111 Thread:#1 SharpCap.Base.BaseImageProvider.Close() :: Ended
Debug: 16:04:31.5887111 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CloseTheImageProvider() :: Ended
Debug: 16:04:31.5897112 Thread:#1 SharpCap.Base.SimpleCaptureProvider.OnDeviceClosed() :: Started
Debug: 16:04:31.5897112 Thread:#1 SharpCap.Base.SimpleCaptureProvider.OnDeviceClosed() :: Ended
Info: 16:04:31.5907116 Thread:#1 SharpCap.Base.CaptureProviderBase`1.CloseDevice() :: Ended
Info: 16:04:31.5917121 Thread:#1 SharpCap.MultiCaptureProvider.SendCaptureEvent(Object sender, CaptureEventArgs e) :: Capture Event : DeviceClosed
Info: 16:04:31.5927125 Thread:#1 SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(Object sender, CaptureEventArgs e) :: DeviceClosed event received in UI thread
Info: 16:04:31.5967139 Thread:#1 SharpCap.Base.CaptureProviderBase`1.Dispose(Boolean bDisposing) :: Started
Error: 16:04:31.5967139 Thread:#1 SharpCap.Base.CaptureProviderBase`1.Dispose(Boolean bDisposing) :: Disposing of PointGreyCaptureProvider
Debug: 16:04:31.5987152 Thread:#1 SharpCap.Base.BaseImageProvider.Dispose(Boolean disposing) :: Started
Debug: 16:04:31.5987152 Thread:#1 SharpCap.Base.BaseImageProvider.Dispose(Boolean disposing) :: Ended
Info: 16:04:31.5987152 Thread:#1 SharpCap.Base.CaptureProviderBase`1.Dispose(Boolean bDisposing) :: Ended


It looks like there is still a problem with mode 7 (I don't have mode 7 only Mode 0). We are marching forward. Thanks once again!

Best,

Brian
Generic PGR error.JPG
Generic PGR error.JPG (41.98 KiB) Viewed 1170 times
Chameleon 3 PGR Camera Error.JPG
Chameleon 3 PGR Camera Error.JPG (39.79 KiB) Viewed 1170 times

User avatar
admin
Site Admin
Posts: 3097
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: error PGR chameleon CMLN-13S2M

Post by admin » Sun Jan 21, 2018 9:22 pm

Hi Brian,

yes, I just saw your bug report which (I hope) pointed me straight to the problem. Please have a go with build 3.1.4968 which I uploaded about 10 minutes ago. I think I should have fixed the 'Error Setting Format7 Information' issue.

cheers,

Robin

deaglesham
Posts: 1
Joined: Mon Jan 22, 2018 10:45 pm

Re: error PGR chameleon CMLN-13S2M

Post by deaglesham » Mon Jan 22, 2018 11:23 pm

I just received a used PGR Chameleon CMLN-13S2C (the colour version) in the mail today and experienced this exact issue that the OP mentioned - i.e. the "Invalid colour space". I was pleasantly surprised to come across this thread, and the recent beta 3.1.4968.0 appears to have solved the problem for me. Perfect timing! I haven't had a chance to put everything through a real test of an imaging session, but hopefully soon.

In my initial attempts to install, I tried the 64-bit version of the PGR drivers and software. I removed that and am using the 32-bit versions - on my Windows 7 64 laptop. Does it matter if I continue with the 32 bit version of PGR, or would I be better off reinstalling the 64 bit versions?

Thanks!

Dave

gladstone1969
Posts: 14
Joined: Sat Jan 06, 2018 8:18 pm

Re: error PGR chameleon CMLN-13S2M

Post by gladstone1969 » Tue Jan 23, 2018 3:57 am

Robin,

Yay! It works. Now I get to play with it. I'm purchasing pro license now and will be in touch if I find any bugs or have anything constructive to say. Thank you very much - it has been great working with you.

Sincerely,

Brian

User avatar
admin
Site Admin
Posts: 3097
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: error PGR chameleon CMLN-13S2M

Post by admin » Tue Jan 23, 2018 7:16 am

Hi Brian,

Hurrah! Glad we got there in the end - hope you have success with your camera and some clear skies!

Dave,

Lucky timing :) I think you can install *both* the 32 and 64 bit versions of the PGR software if you want to run both 32 and 64 bit software to work with the camera. SharpCap is 32 bit. The only things that have to be 64 bit are the operating system level drivers and that's dealt with if you install the 32 bit PGR software on a 64 bit computer.

cheers,

Robin

gladstone1969
Posts: 14
Joined: Sat Jan 06, 2018 8:18 pm

Re: error PGR chameleon CMLN-13S2M

Post by gladstone1969 » Tue Jan 23, 2018 10:01 pm

Robin,

I will try both versions again tonight to see if either one gives me issues. Not a cloud in the sky and almost 5pm. I'm sure as soon as I get setup that will change.

Dave,

I envy your timing!

P.S. This was my first mediocre attempt at a DSO with the Chameleon3 mono (no filters in red zone) Meade Etx-125 EC (1900mm FL) with 0.5 focal reducer (F7.5) - 10 one second exposures. Not the most ideal setup for this but it is a first step. It also did not use Sharpcap:
orionfinal.jpg
orionfinal.jpg (93.46 KiB) Viewed 1159 times
.

I'll post an improved one using your software and a bit more experience. I'm already looking for a suitable mount and an APO 80 or Apo 102!

Best,

Brian

gladstone1969
Posts: 14
Joined: Sat Jan 06, 2018 8:18 pm

Re: error PGR chameleon CMLN-13S2M

Post by gladstone1969 » Thu Jan 25, 2018 3:05 am

Robin,

Image data collected with Sharpcap, processed with DSS, and PS CS2. Camera = Point Grey Chameleon3 Mono, no filters, red zone, MEADE ETX 125EC (Standard mount, deluxe field tripod) - 17 year old setup with 290 1 second subs.
Orion-290-stacked_PS_larger_v2.jpg
Orion-290-stacked_PS_larger_v2.jpg (87.83 KiB) Viewed 1152 times
Thanks for all of your help. I also saw detail in a galaxy for the first time with my scope and your software. Wow! So cool. I'm hooked. Thank you so much.

Best,

Brian

User avatar
admin
Site Admin
Posts: 3097
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: error PGR chameleon CMLN-13S2M

Post by admin » Thu Jan 25, 2018 6:56 am

Hi Brian,

great to hear that it's all working and that you are seeing new things with the camera, scope and software. Hope the weather stays clear for you :)

Robin

gladstone1969
Posts: 14
Joined: Sat Jan 06, 2018 8:18 pm

Re: error PGR chameleon CMLN-13S2M

Post by gladstone1969 » Sat Mar 03, 2018 4:46 am

Robin,

Just a heads up that everything is working well for me now, I've done plate solving, polar alignment, and have captured images of the moon, Orion, and two galaxies. Thank you once again. Here are two improved mono pics of Orion and the moon. I love your program! Thanks again.
MoonRegistaxPSForWeb.jpg
MoonRegistaxPSForWeb.jpg (274.68 KiB) Viewed 1132 times
FullSizeRender.jpg
FullSizeRender.jpg (134.97 KiB) Viewed 1132 times
Orion-290-stacked_PS_larger_v2.jpg
Orion-290-stacked_PS_larger_v2.jpg (110.33 KiB) Viewed 1132 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest