The new version of SC doesn't connect to Mallincamsky DS10c through ASCOM drivers for this camera. Therefore I cannot connect the mount either.
Dan Kahraman
Mallincamsky DS10c and SC 4.00
- admin
- Site Admin
- Posts: 13339
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Mallincamsky DS10c and SC 4.00
Hi,
please can you share a log and a screenshot of any error message that you see - it will give me a chance of working out what is going on.
cheers,
Robin
please can you share a log and a screenshot of any error message that you see - it will give me a chance of working out what is going on.
cheers,
Robin
Re: Mallincamsky DS10c and SC 4.00
Hi Robin:
I just uploaded the latest SC 4.0 if problem repeats will document.
Dan Kahraman
I just uploaded the latest SC 4.0 if problem repeats will document.
Dan Kahraman
Re: Mallincamsky DS10c and SC 4.00
No luck. Telescope menu does not drop down to show the mount
Dan Kahraman
Dan Kahraman
- admin
- Site Admin
- Posts: 13339
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Mallincamsky DS10c and SC 4.00
Hi Dan,
make sure you have the latest ASCOM platform installed - if you have a really old one then it will not work correctly with the latest SharpCap.
cheers,
Robin
make sure you have the latest ASCOM platform installed - if you have a really old one then it will not work correctly with the latest SharpCap.
cheers,
Robin
Re: Mallincamsky DS10c and SC 4.00
Hi Robin:
Updated to ASCOM 6.5 SP1 and SC 4.0 works very well with the Mallincamsky DS10c camera. I will test it on the DS26c next. Maybe the sensor analysis failures were also attributable to my using the previous (older) version of ASCOM.
Thank you very much!
Dan Kahraman
Updated to ASCOM 6.5 SP1 and SC 4.0 works very well with the Mallincamsky DS10c camera. I will test it on the DS26c next. Maybe the sensor analysis failures were also attributable to my using the previous (older) version of ASCOM.
Thank you very much!
Dan Kahraman