Hi
For some reason when I try to connect my Canon 1300D via ASCOM I get error 28619 camera not connected.
Inside it works fine.
APT can see the camera through the same connections
Any thoughts?
Cheers
Graham
error message - camera not connected
-
- Posts: 1
- Joined: Wed May 20, 2020 8:03 pm
- admin
- Site Admin
- Posts: 13339
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: error message - camera not connected
Hi,
I haven't used this Ascom driver for some time, but I am aware that it is now under active development again. You might get useful information if you posted in this thread that is being used to discuss it on the Cloudy Nights forum - https://www.cloudynights.com/topic/7076 ... ntax-sony/
There seem to be fairly frequent updates, so do make sure that you are on the latest version
Cheers, Robin
I haven't used this Ascom driver for some time, but I am aware that it is now under active development again. You might get useful information if you posted in this thread that is being used to discuss it on the Cloudy Nights forum - https://www.cloudynights.com/topic/7076 ... ntax-sony/
There seem to be fairly frequent updates, so do make sure that you are on the latest version
Cheers, Robin