I see "Mallincam Universe" in the camera list. When I access it, I get an error message. This may be due to my having installed the ASCOM driver from the Mallincam website. I'm going to try reinstalling the default ASCOM stuff.
Has anyone ever got the Mallincam Universe to actually work? How?
Mallincam Universe - anyone get it working?
Mallincam Universe - anyone get it working?
- Attachments
-
- Screen Shot 2020-03-11 at 3.58.46 PM.jpg (18.99 KiB) Viewed 2998 times
- admin
- Site Admin
- Posts: 13306
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Mallincam Universe - anyone get it working?
Hi,
Yes, trying to reinstall both the Ascom platform and the MallinCam Ascom drivers would be the best bet here. Any time you see the error message 'REGDB_E_CLASSNOTREG' it's a good hint that a reinstall is worth trying.
Cheers, Robin
Yes, trying to reinstall both the Ascom platform and the MallinCam Ascom drivers would be the best bet here. Any time you see the error message 'REGDB_E_CLASSNOTREG' it's a good hint that a reinstall is worth trying.
Cheers, Robin
Re: Mallincam Universe - anyone get it working?
I did exactly that, and it had no effect.
I first reinstalled ASCOM platform (repair), then reinstalled the Mallincam ASCOM driver.
What I didn't do, and I'll try, is to uninstall everything and do a fresh install.
Thanks.
I first reinstalled ASCOM platform (repair), then reinstalled the Mallincam ASCOM driver.
What I didn't do, and I'll try, is to uninstall everything and do a fresh install.
Thanks.
- admin
- Site Admin
- Posts: 13306
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Mallincam Universe - anyone get it working?
Hi,
The other possible thing to try is to swap from the 32 bit to the 64-bit version of SharpCap (or the other way round if you are already trying the 64-bit version). It could be that the Mallincam driver claims that he can support both but in fact only supports one of the two.
I did a quick search on my PC for the identifier shown ({74145328-.....-....}) and didn't find it – that means it's probably related to the Mallincam driver – if it was related to the Ascom platform I would have found it somewhere on my PC.
Hope this helps, Robin
The other possible thing to try is to swap from the 32 bit to the 64-bit version of SharpCap (or the other way round if you are already trying the 64-bit version). It could be that the Mallincam driver claims that he can support both but in fact only supports one of the two.
I did a quick search on my PC for the identifier shown ({74145328-.....-....}) and didn't find it – that means it's probably related to the Mallincam driver – if it was related to the Ascom platform I would have found it somewhere on my PC.
Hope this helps, Robin
Re: Mallincam Universe - anyone get it working?
Very helpful. I've been using the 64-bit version of Sharpcap Pro. Will try the 32-bit version next.
John
John
Re: Mallincam Universe - anyone get it working?
Almost sorry I tried this. Now I can't get the camera to work at all.
Going to start from scratch installing the software - again.
John
Going to start from scratch installing the software - again.
John