Mount control by Sharpcap

Anything that doesn't fit into any of the other forums
Astrohuub
Posts: 5
Joined: Mon Apr 30, 2018 12:09 pm

Mount control by Sharpcap

#1

Post by Astrohuub »

Hi all, I have the Pro version of Sharpcap. I use it now a few years with different camera's.

I have read that it is possible to do the mount control with Sharpcap also do a platesolving. I found some material about this but is there somewhere a workflow how and what to install so that I can controle my mount and do a active platesolving (center the mount after platesolving) via Sharpcap? I use a Ioptron GEM45. I'm not a really tech guy, so any clear explanation would be grately appreciated.

Thanks all,

CS, Hubert
User avatar
oopfan
Posts: 1321
Joined: Sat Jul 08, 2017 2:37 pm
Location: New York
Contact:

Re: Mount control by Sharpcap

#2

Post by oopfan »

Hi Hubert,

I don't have a controllable mount, but I can get you started:

From the SharpCap menu, click on "File", and then "SharpCap Settings", as seen here:
SharpCap Mount Setup 1.jpg
SharpCap Mount Setup 1.jpg (12.43 KiB) Viewed 2702 times
And then, from the "SharpCap Settings" dialog, click on the "Hardware" tab, as seen here:
SharpCap Mount Setup 2.jpg
SharpCap Mount Setup 2.jpg (64.34 KiB) Viewed 2702 times
Click on the "Mounts" dropdown box. Your mount should be in that list, if it is connected.

I click "Telescope Simulator for .NET" which allows me to visualize where the telescope is pointing using planetarium software like Computer Assisted Astronomy (C2A). Whenever I run a Plate Solve, C2A draws a bulls-eye on the star map.

Sorry, that's all I have.

Brian
User avatar
admin
Site Admin
Posts: 13173
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Mount control by Sharpcap

#3

Post by admin »

Hi,

more info on using the mount once connected in SharpCap can be found here : https://docs.sharpcap.co.uk/3.2/#Mount%20Control

SharpCap is not designed to be able to let you slew the mount to new targets - you will need a separate sky map application for that (for example SkytechX, Cartes du Ciel, etc). SharpCap does allow you to tweak the positioning by the direction controls and recenter using the 'GPS' plate solving button.

cheers,

Robin
Astrohuub
Posts: 5
Joined: Mon Apr 30, 2018 12:09 pm

Re: Mount control by Sharpcap

#4

Post by Astrohuub »

Hi Brian, Robin

thanks for the replies. I will figure it out.

Thanks!
woldsweather
Posts: 114
Joined: Thu Dec 31, 2020 5:07 pm

Re: Mount control by Sharpcap

#5

Post by woldsweather »

I am also trying to set up SharpCap to control my mount. I have got the controls appearing in the bottom right of sharpcap but up down etc dont move the mount. I believe COM ports have something to do with this is that right? In device manager on my laptop(and also on this desktop) COM ports dont appear. Any ideas folks?
User avatar
admin
Site Admin
Posts: 13173
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Mount control by Sharpcap

#6

Post by admin »

Hi,

if you have the controls appearing and active then SharpCap is probably talking to your mount correctly (what sort do you have by the way?).

Have you checked the movement rate selected in the dropdown to the right of the 'Up' button? That may be set to '1x' which is sidereal rate and is very slow movement. If you can pick a higher rate and try that.

cheers,

Robin
woldsweather
Posts: 114
Joined: Thu Dec 31, 2020 5:07 pm

Re: Mount control by Sharpcap

#7

Post by woldsweather »

The mount is EQM-35 PRO. 1x appears but no other choice. I had the moon in view but not the slightest movement when I hit the arrows. What cable set up should I have?
User avatar
admin
Site Admin
Posts: 13173
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Mount control by Sharpcap

#8

Post by admin »

Hi,

I'm afraid I don't know much about that specific model, so not sure what the wiring config should be.

ok, please can you post a SharpCap log captured after you have opened the camera and connected to the mount so I can see what movement rates the mount claims to support.

Which ASCOM driver are you using? EQMOD or the official Skywatcher one?

Do the RA, Dec, Alt and AZ co-ordinates shown in SharpCap update as you move the mount with the handset.

cheers,

Robin
woldsweather
Posts: 114
Joined: Thu Dec 31, 2020 5:07 pm

Re: Mount control by Sharpcap

#9

Post by woldsweather »

Yes using the ASCOM driver. I've never used the handset always used synscan app on phone. If I do that I'll have to remove the EQMOD cable to insert the wifi dongle.

I have noticed however the RA and DEC values are changing (mainly the RA) in the mount control box on SCap and the DEC changes when I hit up or down so maybe it is moving. I was expecting to hear a whirring of the drive but perhaps it will only move slowly.

I tried to focus the camera out of the winder but I have no view beyond 5m from this room (though I can focus on a transmitter 7 miles away in the lounge so could pack up all the gear and decant to there). Perhaps the log tells al?

Here it is:

Info 14:58:13.907292 #1 Starting... in void SharpCap.Program.Main()
Info 14:58:14.047917 #1 Setting up bug reporting. in void SharpCap.BugReporting.SetupNBUG()
Info 14:58:14.360415 #1 Showing splash screen in void SharpCap.Program.ShowSplash()
Info 14:58:14.860417 #1 Starting thread to log system info in void SharpCap.LogSystemInfo.Run()
Info 14:58:15.126044 #1 Setting up application in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 14:58:15.141667 #1 Initializing WPF in void SharpCap.Program.RunApp(CommandLineArgs args)
Info 14:58:15.454169 #1 Added device enumerator of type BaslerDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type QHYDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type ASIDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type AltairDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type SVBonyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type PointGreyDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type SxDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type iNovaDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type AstCamPanDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type CelestronDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type MoravianDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type AtikDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.454169 #1 Added device enumerator of type P1DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.469795 #1 Added device enumerator of type DS3DeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.469795 #1 Added device enumerator of type AscomDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.469795 #1 Added device enumerator of type FolderMonitorDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.469795 #1 Added device enumerator of type FakeDeviceEnumerator in void SharpCap.MultiCaptureProvider.AddProvider<T>()
Info 14:58:15.532290 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ASCOM.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.579168 #1 Found device Filter Wheel Simulator [.Net] in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.579168 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.594791 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.WheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.610418 #1 Loading Hardware Proxies from SharpCap.WheelProxy.ZWO.ManualWheelFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.610418 #1 Found device Manual Filter Wheel in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.672917 #1 Loading Hardware Proxies from SharpCap.MountProxy.ASCOM.MountFactory in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device Device Hub Telescope in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device Telescope Simulator for .NET in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device SynScan App Driver in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device EQMOD ASCOM HEQ5/6 in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device EQMOD ASCOM Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.688542 #1 Found device Simulator in void SharpCap.ProxyFinder<T>.LoadProxiesForFactoryType(Type t)
Info 14:58:15.891667 #1 Application model created in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs)
Info 14:58:15.907288 #1 Ignoring supplied culture of because the 'English Only' option is set in ITranslationProvider SharpCap.UI.MainWindowSupport.CreateTranslationProvider(string culture)
Info 14:58:15.907288 #1 UI culture is en in new SharpCap.UI.JsonTranslationProvider(CultureInfo culture)
Info 14:58:16.422917 #9 =='LogInfo Thread' (New Thread)
Info 14:58:16.422917 #9 AvailablePhysicalMemory: 5648Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 AVSoftware: Windows Defender in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 CPU: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz with 2 cores. in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 Culture: en-US in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 CurrentDirectory: C:\Program Files (x86)\SharpCap 4.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 GCMemory: 120Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 InstallationId: a5e0dbfd-86ac-444a-bfa4-9a85435c2498 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSBitness: 64 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSEdition: Microsoft Windows 10 Pro in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSFullVersion: 10.0.19043 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSProductType: 0x6 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 OSVersion: Microsoft Windows NT 6.2.9200.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 Path: C:\Program Files (x86)\Common Files\Oracle\Java\javapath;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Users\JuneHP\AppData\Local\Microsoft\WindowsApps; in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 ProcessMemory: 162Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 ProcessorCount: 2 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.422917 #9 SharpCapBitness: 32 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.438541 #9 SharpCapExecutablePath: file:///C:/Program Files (x86)/SharpCap 4.0/SharpCap.exe in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.438541 #9 SharpCapVersion: 4.0.8026.0 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.438541 #9 SystemMemory: 8094Mb in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.438541 #9 WindowsMediaVersion: 12.0.19041.1151 in void SharpCap.LogSystemInfo.ThreadProc()
Info 14:58:16.797916 #1 View model initialized in new SharpCap.UI.MainWindowSupport(CommandLineArgs parsedArgs)
Debug 14:58:16.829167 #1 Started new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel) in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Info 14:58:16.907290 #1 Preview host created in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Info 14:58:16.907290 #1 Parent being changed on PreviewPanel in void SharpCap.UI.ScrollZoomForm.OnParentChanged(object sender, EventArgs eventArgs)
Info 14:58:16.907290 #1 Creating control form in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Info 14:58:17.547921 #1 Control Form created in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Debug 14:58:17.969790 #1 Ended new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel) in new SharpCap.UI.SharpCapForm(SharpCapViewModel viewModel)
Debug 14:58:18.321356 #1 Started void SharpCap.UI.SharpCapForm.SharpCapForm_Load(object sender, EventArgs e) in void SharpCap.UI.SharpCapForm.SharpCapForm_Load(object sender, EventArgs e)
Debug 14:58:18.324354 #1 Ended void SharpCap.UI.SharpCapForm.SharpCapForm_Load(object sender, EventArgs e) in void SharpCap.UI.SharpCapForm.SharpCapForm_Load(object sender, EventArgs e)
Debug 14:58:18.343348 #1 Started void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e) in void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e)
Debug 14:58:18.544355 #1 Docking setup in void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e)
Debug 14:58:18.732353 #1 Started void SharpCap.UI.MainWindowSupport.OnShown(IWin32Window parentWindow, IImageDisplay displayTarget, INightMode nightMode) in void SharpCap.UI.MainWindowSupport.OnShown(IWin32Window parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Debug 14:58:19.071351 #1 Timebomb checked in void SharpCap.UI.MainWindowSupport.OnShown(IWin32Window parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Info 14:58:19.079355 #1 WPF Rendering tier is 2 in bool SharpCap.SharpCapApp.get_ForceSoftwareRendering()
Info 14:58:19.277964 #1 Starting scan for cameras in IReadOnlyList<ICamera> SharpCap.Models.Application.get_Cameras()
Info 14:58:21.137342 #9 Atik Camera SDK not found : Unable to load DLL 'AtikCameras.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) in IEnumerable<DeviceTagData> SharpCap.Cameras.Atik.AtikDeviceEnumerator.GetDevices()
Info 14:58:21.199843 #1 BaslerDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.199843 #1 QHYDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.199843 #1 ASIDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: ALTAIRGP327C (Altair Cameras, AA201022090358327C2E076DAF3A970) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 SVBonyDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 PointGreyDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 SxDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 iNovaDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 AstCamPanDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 CelestronDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 MoravianDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 AtikDeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 P1DeviceEnumerator detected no devices in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: HP Webcam-101 (DirectShow Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Altair Astro Camera ASCOM Driver (ASCOM Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Altair Astro Camera ASCOM Driver 2 (ASCOM Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Camera V2 simulator (ASCOM Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Folder Monitor Camera (Virtual Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Test Camera 1 (Deep Sky) (Test Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.527990 #1 Detected Camera: Test Camera 2 (High Speed) (Test Cameras, ) in void SharpCap.MultiCaptureProvider.PostProcessDevicesList(List<DeviceTagData> items, BrandingInfo brandingInfo, IDeviceEnumerator deviceEnumerator)
Info 14:58:21.590462 #1 CameraListUpdated event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 14:58:26.231088 #1 Splash and tips done in void SharpCap.UI.MainWindowSupport.OnShown(IWin32Window parentWindow, IImageDisplay displayTarget, INightMode nightMode)
Debug 14:58:26.246728 #1 Ended void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e) in void SharpCap.UI.SharpCapForm.SharpCap_Shown(object sender, EventArgs e)
Info 14:58:29.309220 #1 Updating devices menu in void SharpCap.ViewModels.CamerasMenuViewModel.UpdateDevicesMenu()
Info 14:58:31.309218 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.OpenCameraAction ALTAIRGP327C executing in async Task SharpCap.ViewModels.UIAction.Execute()
Info 14:58:31.356087 #1 Changing camera from none to ALTAIRGP327C in void SharpCap.Models.Application.SelectNewCamera(Camera value)
Info 14:58:31.418585 #1 OpeningDevice event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Debug 14:58:31.418585 #1 Opening device : ALTAIRGP327C (via Altair Cameras) in void SharpCap.MultiCaptureProvider.OpenDevice(DeviceTagData deviceTag)
Debug 14:58:31.418585 #1 Started void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow)
Debug 14:58:31.434213 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow) in void SharpCap.Base.CaptureProviderBase<T>.Initialize(IImageDisplay previewTargetWindow)
Info 14:58:31.434213 #1 Started void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Debug 14:58:31.434213 #1 Started void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) in void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd)
Info 14:58:31.746723 #1 Setting ImageProvider CurrentDevice to SharpCap.Cameras.Altair.AltairCameraProxy in void SharpCap.Base.BaseImageProvider.set_CurrentDevice(ICameraProxy value)
Debug 14:58:31.746723 #1 Ended void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd) in void SharpCap.Base.SimpleCaptureProvider.SetupDevice(DeviceTagData dtd)
Info 14:58:31.777964 #1 Started CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl() in CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl()
Debug 14:58:31.793603 #1 Started ControlMap SharpCap.Base.SimpleCaptureProvider.GetControls() in ControlMap SharpCap.Base.SimpleCaptureProvider.GetControls()
Debug 14:58:31.809223 #1 Started ControlMap SharpCap.Cameras.Altair.AltairCameraProxy.GetControlsImpl(IPreviewControl previewControl) in ControlMap SharpCap.Cameras.Altair.AltairCameraProxy.GetControlsImpl(IPreviewControl previewControl)
Info 14:58:31.871713 #1 Colour space RAW8 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl)
Info 14:58:31.871713 #1 Colour space RAW12 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl)
Info 14:58:31.871713 #1 Colour space RGB24 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl)
Info 14:58:31.871713 #1 Colour space MONO8 is valid. in new SharpCap.Base.ColourSpacePropertyControl(IEnumFeature mainFeature, List<ColourSpace> colourSpaces, IPreviewControl previewControl)
Info 14:58:31.887337 #1 Altair Trigger Mode detected - enabling exposures up to 900s in new SharpCap.Cameras.Altair.ExposureIntFeature(AltairCam cam)
Debug 14:58:31.918592 #1 Ended ControlMap SharpCap.Cameras.Altair.AltairCameraProxy.GetControlsImpl(IPreviewControl previewControl) in ControlMap SharpCap.Cameras.Altair.AltairCameraProxy.GetControlsImpl(IPreviewControl previewControl)
Warning 14:58:31.934213 #1 Flat frame correction not available - processor does not support SSE4 in bool SharpCap.Base.FlatFrame.get_Available()
Info 14:58:31.949835 #1 Ended CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl() in CaptureControl SharpCap.Base.CaptureProviderBase<T>.CreateCaptureControl()
Info 14:58:31.949835 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd) in void SharpCap.Base.CaptureProviderBase<T>.OpenDevice(DeviceTagData dtd)
Debug 14:58:31.965463 #1 Started bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Debug 14:58:31.965463 #1 Ended (No default defined for this camera) bool SharpCap.Models.Camera.ApplyDefaultProfile() in bool SharpCap.Models.Camera.ApplyDefaultProfile()
Info 14:58:31.965463 #1 Starting preview on ALTAIRGP327C in void SharpCap.MultiCaptureProvider.StartPreview()
Info 14:58:31.984478 #1 Started void SharpCap.Base.CaptureProviderBase<T>.StartPreview() in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Info 14:58:31.985477 #1 Starting Preview on ALTAIRGP327C, 1920x1080, Bayer_RGGB, 8bits in Live mode. in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Debug 14:58:32.292101 #1 Started void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Debug 14:58:32.307136 #1 Started void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Info 14:58:32.312133 #21 =='Grab Thread' (New Thread)
Debug 14:58:32.313132 #21 Started void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Info 14:58:32.319134 #21 Got max resolution of {Width=1920, Height=1080}, allocating 6220800 for temp buffer in void SharpCap.Cameras.Altair.AltairCameraProxy.SetupGrabThread()
Debug 14:58:33.037124 #1 Ended void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Debug 14:58:33.043126 #1 Ended void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Info 14:58:33.047120 #1 Capture Event : StartPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 14:58:33.066123 #1 StatusBarUpdate event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 14:58:33.066123 #1 Connecting to mount EQMOD ASCOM HEQ5/6 in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls)
Info 14:58:33.068121 #1 Connecting to mount : EQMOD ASCOM HEQ5/6 in void SharpCap.Models.Mount.set_Connected(bool value)
Debug 14:58:33.082172 #1 Started new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 14:58:33.083172 #1 Creating ASCOM Telescope mount of type EQMOD.Telescope ('EQMOD ASCOM HEQ5/6') in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 14:58:33.211766 #21 Paged memory check based on total memory of 8094Mb, available of 5686Mb in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 14:58:33.212764 #21 Paged memory enabled at 3001Mb for Frame Cache and 1046Mb for LiveStack/Misc on 64 bit system. in (int pooled, int unpooled) SharpCap.Base.Memory.Allocator.NumberOfMegabytesToMap()
Info 14:58:33.213763 #21 Assigning 1046Mb to non-pool memory and 3001Mb to the frame pool. in static SharpCap.Base.Memory.Allocator()
Debug 14:58:35.791261 #1 Ended new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource) in new SharpCap.MountProxy.ASCOM.MountWrapper(string deviceName, string progId, IUIDisableSource disableSource)
Info 14:58:36.991928 #1 The mount claims to be EQMOD HEQ5/6, EQASCOM V2.00q

USITG, EQMOD ASCOM Driver, 1.0 in void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()
Info 14:58:37.003928 #1 The mount reports an alignment mode of algGermanPolar in void SharpCap.MountProxy.ASCOM.MountWrapper.TryConnect()
Info 14:58:37.005928 #1 Mount 'EQMOD ASCOM HEQ5/6' now Conneted:True in void SharpCap.Models.ConnectableHardware.OnConnectedChanged()
Info 14:58:37.009917 #1 Astap found at c:\Program Files\Astap\Astap.exe in bool SharpCap.ImageProcessing.AstapPlateSolverFactory.CheckInstalledImpl()
Info 14:58:37.027912 #1 Plate solver detection : Manually configured Astrometry - Not configured in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Info 14:58:37.030913 #1 Plate solver detection : AstroTortilla - Not found in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Info 14:58:37.032915 #1 Plate solver detection : All Sky Plate Solver - Not found (binary path missing : C:\Users\JuneHP\AppData\Local\Astrometry\bin) in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Info 14:58:37.033915 #1 Plate solver detection : Ansvr - Not found at C:\Users\JuneHP\AppData\Local\cygwin_ansvr in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Info 14:58:37.034914 #1 Plate solver detection : Cygwin/Astrometry based - Not found at C:\cygwin in bool SharpCap.ImageProcessing.CombinedAstrometryPlateSolveFactory.CheckInstalledImpl()
Warning 14:58:37.105501 #1 Focal Length not available via ASCOM from EQMOD ASCOM HEQ5/6 : Exception of type 'PropertyNotImplementedException' : Property read EQMOD.Telescope FocalLength is not implemented in this driver.
Stack Trace: at object ASCOM.DriverAccess.MemberFactory.CallMember(int memberCode, string memberName, Type[] parameterTypes, params object[] parms) in C:/ASCOM Build/Export/ASCOM.DriverAccess/MemberFactory.cs:line 278
at double ASCOM.DriverAccess.Telescope.get_FocalLength() in C:/ASCOM Build/Export/ASCOM.DriverAccess/Telescope.cs:line 607
at double SharpCap.MountProxy.ASCOM.MountInterceptionProxy.get_FocalLength() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountInterceptionProxy.cs:line 308
at double? SharpCap.MountProxy.ASCOM.MountWrapper.get_FocalLength() in C:/Documents/Source Code/SharpCap/src/SharpCap.MountProxy.ASCOM/MountWrapper.cs:line 57 in double? SharpCap.MountProxy.ASCOM.MountWrapper.get_FocalLength()
Warning 14:58:37.107491 #1 Inner Exception : System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException: Property FocalLength is not implemented by this telescope driver object.
--- End of inner exception stack trace ---
at object RuntimeType.InvokeDispMethod(string name, BindingFlags invokeAttr, object target, object[] args, bool[] byrefModifiers, int culture, string[] namedParameters)
at object RuntimeType.InvokeMember(string name, BindingFlags bindingFlags, Binder binder, object target, object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, string[] namedParams)
at object Type.InvokeMember(string name, BindingFlags invokeAttr, Binder binder, object target, object[] args, CultureInfo culture)
at object ASCOM.DriverAccess.MemberFactory.CallMember(int memberCode, string memberName, Type[] parameterTypes, params object[] parms) in C:/ASCOM Build/Export/ASCOM.DriverAccess/MemberFactory.cs:line 242 in double? SharpCap.MountProxy.ASCOM.MountWrapper.get_FocalLength()
Warning 14:58:37.109490 #1 Inner Exception : System.Runtime.InteropServices.COMException (0x80040400): Property FocalLength is not implemented by this telescope driver object. in double? SharpCap.MountProxy.ASCOM.MountWrapper.get_FocalLength()
Info 14:58:37.200225 #1 StatusBarUpdate event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 14:58:37.203223 #1 Done merging in hardware controls in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls)
Info 14:58:37.385010 #1 StartPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 14:58:37.995247 #1 Loading library sensor characteristics from C:\Program Files (x86)\SharpCap 4.0\SensorLibrary\ALTAIRGP327C~RAW8.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 14:58:38.024605 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StartPreview() in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Info 14:58:38.147945 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.OpenCameraAction ALTAIRGP327C complete in async Task SharpCap.ViewModels.UIAction.Execute()
Debug 14:58:38.959105 #1 Started new SharpCap.UI.Hardware.MountControl(Mount model) in new SharpCap.UI.Hardware.MountControl(Mount model)
Debug 14:58:38.967108 #1 Started new SharpCap.ViewModels.MountViewModel(Mount model) in new SharpCap.ViewModels.MountViewModel(Mount model)
Info 14:58:38.969106 #3 =='Monitor mount movement thread' (New Thread)
Debug 14:58:38.969106 #3 Started void SharpCap.ViewModels.MountViewModel.MountMonitor() in void SharpCap.ViewModels.MountViewModel.MountMonitor()
Debug 14:58:38.971107 #1 Ended new SharpCap.ViewModels.MountViewModel(Mount model) in new SharpCap.ViewModels.MountViewModel(Mount model)
Info 14:58:38.971107 #1 Triggering mount initialization in new SharpCap.ViewModels.MountViewModel(Mount model)
Debug 14:58:38.979100 #1 Started void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 14:58:38.979100 #1 Dispatcher disable count is 0 in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 14:58:39.169410 #1 Axis 0 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 14:58:39.181420 #1 Slew rates are : 0-3.34245933333333 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 14:58:39.200414 #1 Axis 1 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 14:58:39.209407 #1 Slew rates are : 0-3.34245933333333 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 14:58:39.233688 #1 Testing slew rates for availability : 1, 2, 4, 16, 60, 120, 239.3447, 480, 720, 960, 1920, 4800, 9600, 12000 in IEnumerable<double> SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRates()
Info 14:58:39.238714 #1 Slew rate of 960 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.240718 #1 Slew rate of 1920 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.241714 #1 Slew rate of 4800 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.243716 #1 Slew rate of 9600 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.244714 #1 Slew rate of 12000 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 14:58:39.244714 #1 EQMOD ASCOM HEQ5/6 has 9 available slew rates. in ObservableCollection<MountRate> SharpCap.ViewModels.MountViewModel.CreateRates()
Info 14:58:39.246713 #1 Slew rates set in void SharpCap.ViewModels.MountViewModel.Initialize()
Debug 14:58:39.250719 #1 Ended void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 15:03:30.513487 #1 Updating devices menu in void SharpCap.ViewModels.CamerasMenuViewModel.UpdateDevicesMenu()
Info 15:03:30.721004 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.RestartPreviewAction executing in async Task SharpCap.ViewModels.UIAction.Execute()
Info 15:03:30.842289 #1 Stopping preview from Camera object : Restart preview request in void SharpCap.Models.Camera.StopPreview(string reason)
Info 15:03:30.843293 #1 Stopping preview : Restart preview request in void SharpCap.MultiCaptureProvider.StopPreview(string reason)
Info 15:03:30.844290 #1 Stopping preview from MultiCaptureProvider in void SharpCap.MultiCaptureProvider.StopPreview(string reason)
Info 15:03:30.845289 #1 Stopping preview : Restart preview request in void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason)
Info 15:03:30.846293 #1 Started void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason) in void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason)
Debug 15:03:30.848293 #1 Started void SharpCap.Base.BaseImageProvider.Stop() in void SharpCap.Base.BaseImageProvider.Stop()
Info 15:03:30.848293 #1 Stopping preview, 3077 frames processed, 0 frames dropped in void SharpCap.Base.BaseImageProvider.Stop()
Debug 15:03:30.850292 #1 Started void SharpCap.Base.CameraProxyBase.StopPreview() in void SharpCap.Base.CameraProxyBase.StopPreview()
Info 15:03:30.931191 #21 Capture cancelled, returning null frame in BufferFrame SharpCap.Base.CameraProxyBase.GrabFrameWithRateLimit(DateTime startTime, CancellationToken cancellationToken)
Debug 15:03:30.932193 #21 Ended void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Debug 15:03:31.033337 #1 Ended void SharpCap.Base.CameraProxyBase.StopPreview() in void SharpCap.Base.CameraProxyBase.StopPreview()
Debug 15:03:31.049337 #1 Ended void SharpCap.Base.BaseImageProvider.Stop() in void SharpCap.Base.BaseImageProvider.Stop()
Info 15:03:31.051331 #1 Capture Event : StopPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 15:03:31.059337 #1 Drop stashed frames reclaimed 2076672 bytes of memory. in void SharpCap.Base.Memory.MappedBufferFactory+MemoryManager.DropStashedFrames()
Info 15:03:31.134293 #1 StopPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 15:03:31.166301 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason) in void SharpCap.Base.CaptureProviderBase<T>.StopPreview(string reason)
Info 15:03:31.166301 #1 Starting preview on ALTAIRGP327C in void SharpCap.MultiCaptureProvider.StartPreview()
Info 15:03:31.169297 #1 Started void SharpCap.Base.CaptureProviderBase<T>.StartPreview() in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Info 15:03:31.169297 #1 Starting Preview on ALTAIRGP327C, 1920x1080, Bayer_RGGB, 8bits in Live mode. in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Debug 15:03:31.170295 #1 Started void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Debug 15:03:31.172298 #1 Started void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Info 15:03:31.173293 #26 =='Grab Thread' (New Thread)
Debug 15:03:31.174301 #26 Started void SharpCap.Base.CameraProxyBase.GrabThreadProc() in void SharpCap.Base.CameraProxyBase.GrabThreadProc()
Info 15:03:31.175299 #26 Got max resolution of {Width=1920, Height=1080}, allocating 6220800 for temp buffer in void SharpCap.Cameras.Altair.AltairCameraProxy.SetupGrabThread()
Debug 15:03:31.180298 #1 Ended void SharpCap.Base.CameraProxyBase.StartPreview() in void SharpCap.Base.CameraProxyBase.StartPreview()
Debug 15:03:31.182298 #1 Ended void SharpCap.Base.BaseImageProvider.Start() in void SharpCap.Base.BaseImageProvider.Start()
Info 15:03:31.184292 #1 Capture Event : StartPreview in void SharpCap.MultiCaptureProvider.SendCaptureEvent(object sender, CaptureEventArgs e)
Info 15:03:31.186298 #1 Done merging in hardware controls in void SharpCap.Models.Application.MergeInDeviceIndependentControls(CaptureControl controls)
Info 15:03:31.193301 #1 StartPreview event received in UI thread in async void SharpCap.ViewModels.SharpCapViewModel.appModel_OnCaptureEvent(object sender, CaptureEventArgs e)
Info 15:03:31.203294 #1 Loading library sensor characteristics from C:\Program Files (x86)\SharpCap 4.0\SensorLibrary\ALTAIRGP327C~RAW8.json in SensorCharacteristics SharpCap.CameraAnalysis.SensorLibrary.LoadImpl(string normalizeCameraName, string colourSpace, string cameraMode, bool speculative)
Info 15:03:31.207830 #1 Ended void SharpCap.Base.CaptureProviderBase<T>.StartPreview() in void SharpCap.Base.CaptureProviderBase<T>.StartPreview()
Info 15:03:31.280402 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.RestartPreviewAction complete in async Task SharpCap.ViewModels.UIAction.Execute()
Debug 15:03:31.664402 #1 Started new SharpCap.UI.Hardware.MountControl(Mount model) in new SharpCap.UI.Hardware.MountControl(Mount model)
Debug 15:03:31.666405 #1 Started new SharpCap.ViewModels.MountViewModel(Mount model) in new SharpCap.ViewModels.MountViewModel(Mount model)
Info 15:03:31.667408 #28 =='Monitor mount movement thread' (New Thread)
Debug 15:03:31.667408 #28 Started void SharpCap.ViewModels.MountViewModel.MountMonitor() in void SharpCap.ViewModels.MountViewModel.MountMonitor()
Debug 15:03:31.670407 #1 Ended new SharpCap.ViewModels.MountViewModel(Mount model) in new SharpCap.ViewModels.MountViewModel(Mount model)
Info 15:03:31.670407 #1 Triggering mount initialization in new SharpCap.ViewModels.MountViewModel(Mount model)
Debug 15:03:31.675407 #1 Started void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 15:03:31.675407 #1 Dispatcher disable count is 0 in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 15:03:31.824273 #1 Axis 0 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 15:03:31.832264 #1 Slew rates are : 0-3.34245933333333 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 15:03:31.847264 #1 Axis 1 has 1 slew rates. in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 15:03:31.854267 #1 Slew rates are : 0-3.34245933333333 in Tuple<double, double>[] SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRatesViaIndexing(int axis)
Info 15:03:31.856261 #1 Testing slew rates for availability : 1, 2, 4, 16, 60, 120, 239.3447, 480, 720, 960, 1920, 4800, 9600, 12000 in IEnumerable<double> SharpCap.MountProxy.ASCOM.MountWrapper.GetSlewRates()
Info 15:03:31.857260 #1 Slew rate of 960 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.858266 #1 Slew rate of 1920 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.859265 #1 Slew rate of 4800 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.861260 #1 Slew rate of 9600 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.862259 #1 Slew rate of 12000 is not allowed for axis 0 in bool SharpCap.MountProxy.ASCOM.MountWrapper.IsAllowed(double d, Tuple<double, double>[] axisRates, int i)
Info 15:03:31.862259 #1 EQMOD ASCOM HEQ5/6 has 9 available slew rates. in ObservableCollection<MountRate> SharpCap.ViewModels.MountViewModel.CreateRates()
Info 15:03:31.862259 #1 Slew rates set in void SharpCap.ViewModels.MountViewModel.Initialize()
Debug 15:03:31.863265 #1 Ended void SharpCap.ViewModels.MountViewModel.Initialize() in void SharpCap.ViewModels.MountViewModel.Initialize()
Info 15:03:34.774967 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction executing in async Task SharpCap.ViewModels.UIAction.Execute()
Info 15:03:34.873686 #1 Toolbar/Menu input : SharpCap.ViewModels.Actions.ShowLogAction complete in async Task SharpCap.ViewModels.UIAction.Execute()
User avatar
admin
Site Admin
Posts: 13173
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Mount control by Sharpcap

#10

Post by admin »

Hi,

as far as I can see from that log, you should have 9 movement rates available in the dropdown like this
Capture.JPG
Capture.JPG (28.59 KiB) Viewed 2299 times
When you select the higher rates (like 1, 2 or 3 degrees per second) the movement should be much more noticeable.

Nothing appears to be amiss from the content of that log.

Robin
Post Reply