Hi everyone I cannot lower the initial frame count from 10 to to 5 with livestack sigma clipping
Is there a way to do so, appreciated any help
Thank you Ronald
Sigma. Clipping
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sigma. Clipping
Hi,
this looks like a bug in SharpCap 3.2. I tested first in SharpCap 3.3 and it was fine, but in 3.2 is sooner you raise the count from five it goes to 10 and cannot be lowered again. It looks like there's a workaround for this by pressing the 'Reset' button on the log tab – this puts all the live stack settings back to their defaults, including putting the initial frame count back to 5. You may want to note down any other customisations to the settings you've made so you can reapply them after resetting.
Cheers, Robin
this looks like a bug in SharpCap 3.2. I tested first in SharpCap 3.3 and it was fine, but in 3.2 is sooner you raise the count from five it goes to 10 and cannot be lowered again. It looks like there's a workaround for this by pressing the 'Reset' button on the log tab – this puts all the live stack settings back to their defaults, including putting the initial frame count back to 5. You may want to note down any other customisations to the settings you've made so you can reapply them after resetting.
Cheers, Robin
Re: Sigma. Clipping
Thank you much the satellite problem is very annoying at times, and do you have time line for the relea6 of SC 3.3?
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Sigma. Clipping
Hi Ronald,
SharpCap 3.3 is now in public beta testing – that means that you can download it and try it, but it isn't finished yet.
See : viewtopic.php?f=38&t=3121
As to when it will be ready for a full release – too early to say, but probably 'spring 2021' (which gives a nice wide range!)
Cheers, Robin
SharpCap 3.3 is now in public beta testing – that means that you can download it and try it, but it isn't finished yet.
See : viewtopic.php?f=38&t=3121
As to when it will be ready for a full release – too early to say, but probably 'spring 2021' (which gives a nice wide range!)
Cheers, Robin