Platesolving with SharpCap.
-
- Posts: 2
- Joined: Tue Sep 14, 2021 6:35 am
Platesolving with SharpCap.
I have my EQM-35 mount connected to my laptop along with a camera. . I have installed Astro Tortilla. I would like to try plate solving for the first time. When I go to tools>platesolving in SharpCap platesolving is greyed out. Is there something else I have to do?
Re: Platesolving with SharpCap.
Hi Carmelo
Did you test if it will work?
You can test it under File > SharpCap Settings > Plate Solving and on the bottom there, there is a button Test Selected Plate Solver.
If everything is set correctly, it will successfully do that test. Your camera and mount don't have to be connected for that test.
Menno
Did you test if it will work?
You can test it under File > SharpCap Settings > Plate Solving and on the bottom there, there is a button Test Selected Plate Solver.
If everything is set correctly, it will successfully do that test. Your camera and mount don't have to be connected for that test.
Menno
Re: Platesolving with SharpCap.
Hello - I'm also a beginner platesolver and experienced an issue last night so I'm trying to make sure I have the right configuration set up. Anyway, I don't have the test button you referred to. I've attached a screenshot of what I see under the plate solving tab. Thanks in advance for your help. Bob
- Attachments
-
- 2021-09-24.png (107.35 KiB) Viewed 630 times
- admin
- Site Admin
- Posts: 13339
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Platesolving with SharpCap.
Hi,
the test button is new in SharpCap 4.0 - time for a quick upgrade
cheers,
Robin
the test button is new in SharpCap 4.0 - time for a quick upgrade
cheers,
Robin