Welcome to the new SharpCap Forums.
These forums are now the primary way to get support for SharpCap as well as a place to share hints, tips, tricks and images taken with SharpCap. Please make all requests for support by posting in the open forums rather than by sending PM messages - Forum posts can be found and read by others which means that the same question does not get asked many times.
cheers,
Robin
Welcome to the SharpCap Forums
-
- Posts: 1
- Joined: Tue Feb 14, 2017 10:37 pm
- Location: Hobart, Australia
Re: Welcome to the SharpCap Forums
Hello Robin,
The forum looks great i like the purple! everything stands out clear and no doubt this is the best way to share our experiences and get information from you and the many of the users of SharpCap in one place. :
Congratulations from Tasmania, Australia
Regards
Michael :![Smile :)](./images/smilies/icon_e_smile.gif)
The forum looks great i like the purple! everything stands out clear and no doubt this is the best way to share our experiences and get information from you and the many of the users of SharpCap in one place. :
Congratulations from Tasmania, Australia
Regards
Michael :
![Smile :)](./images/smilies/icon_e_smile.gif)
- admin
- Site Admin
- Posts: 13330
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Welcome to the SharpCap Forums
Thanks Michael, glad you are liking the forum so far ![Smile :)](./images/smilies/icon_e_smile.gif)
The colour scheme is likely to go through a few more tweaks - I wanted something a bit darker than the default light blue theme and this was what I could come up with quickly. Still ironing out a few other teething problems, but getting there I hope.
cheers,
Robin
![Smile :)](./images/smilies/icon_e_smile.gif)
The colour scheme is likely to go through a few more tweaks - I wanted something a bit darker than the default light blue theme and this was what I could come up with quickly. Still ironing out a few other teething problems, but getting there I hope.
cheers,
Robin
-
- Posts: 25
- Joined: Fri Aug 11, 2017 12:23 am
Re: Welcome to the SharpCap Forums
Hi, just joined the forum. Live in Brisbane Australia in very light polluted downtown townhouse complex so usually wait for no Moon or very little Moon to do anything. Practise EAA using ASI224 with SharpCap, and Canon EOS with Astrotoaster. Max I've ever shot is 60 secs preferring shorter exposures than that. Matter of fact single 30 sec shots or only 4 to 9 four or eight second shots for outreach.
Cheers
AussieHowie
Cheers
AussieHowie
- admin
- Site Admin
- Posts: 13330
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Welcome to the SharpCap Forums
Hi Howie,
welcome to the forum, hope that you find some useful info here and enjoy your stay.
cheers,
Robin
welcome to the forum, hope that you find some useful info here and enjoy your stay.
cheers,
Robin
-
- Posts: 2
- Joined: Mon Jan 18, 2021 9:15 pm
Re: Welcome to the SharpCap Forums
Interesting to see you have your own forum, Robin, versus something on Groups.io. I hope it doesn't become overwhelming when your real focus is the SharpCap tool itself. I have a SharpCap Pro license and just printed out the entire 3.2 manual, had it spiral bound. It was the suggestion of one of your v.3.3 Pro Beta users, I have been watching doing EAA.
My question to this welcome is there an errata or addendum for v 3 3 to print out or make changes to the v3.2 manual?
Additionally, I have a ZWO ASI183MM, camera and an Inova PLB MX2. Is there support or going to be support for various Atik cameras either as an ASCOM supported camera or via direct models? I also have the Atik 460EX CCD camera.
Inquiring minds want to know.
For now, its back to reading so I can participate in EAA since we can not be doing public outreach directly with the public yet!
Thank you,
John Sillasen (Connecticut USA)
My question to this welcome is there an errata or addendum for v 3 3 to print out or make changes to the v3.2 manual?
Additionally, I have a ZWO ASI183MM, camera and an Inova PLB MX2. Is there support or going to be support for various Atik cameras either as an ASCOM supported camera or via direct models? I also have the Atik 460EX CCD camera.
Inquiring minds want to know.
For now, its back to reading so I can participate in EAA since we can not be doing public outreach directly with the public yet!
Thank you,
John Sillasen (Connecticut USA)
- admin
- Site Admin
- Posts: 13330
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Welcome to the SharpCap Forums
Hi John,
so far, the only documentation specific to SharpCap 3.3 is to be found in the posts that I've been making in the beta testing forums – this is usually just a high-level overview of changes and new features. I will be doing a full documentation update to bring the manual into line with 3.3, but that will only occur after 3.3 is effectively ready for wide usage (ie the beta period is finished).
Do give your Atik camera a go with SharpCap - I added Atik support about a year ago to SharpCap 3.2, so it should work if you have a recent version.
cheers,
Robin
so far, the only documentation specific to SharpCap 3.3 is to be found in the posts that I've been making in the beta testing forums – this is usually just a high-level overview of changes and new features. I will be doing a full documentation update to bring the manual into line with 3.3, but that will only occur after 3.3 is effectively ready for wide usage (ie the beta period is finished).
Do give your Atik camera a go with SharpCap - I added Atik support about a year ago to SharpCap 3.2, so it should work if you have a recent version.
cheers,
Robin
-
- Posts: 2
- Joined: Mon Jan 18, 2021 9:15 pm
Re: Welcome to the SharpCap Forums
Thank you, sir! On the advice of Mike Jerry in Nevada USA, a Beta user of v3.3, I printed out the entire 3.2 PDF manual. I took all 106 double sided pages to a Staples store. There they did a spiral bound so the sheets stay together and put it into a cover with a clear top and black plastic back.
A very nice way to pick up the manual and read it, as was his suggestion. Coming from a Nebulosity and Images Plus user background, I found this suggestion to be quite helpful.
Perhaps when 3.3 is released, you may find value in adding an Errata addendum with specific pages that need updating or replacing completely. A very fine product indeed.
Thank you for your efforts with SharpCap Pro!
John Sillasen
Connecticut USA
A very nice way to pick up the manual and read it, as was his suggestion. Coming from a Nebulosity and Images Plus user background, I found this suggestion to be quite helpful.
Perhaps when 3.3 is released, you may find value in adding an Errata addendum with specific pages that need updating or replacing completely. A very fine product indeed.
Thank you for your efforts with SharpCap Pro!
John Sillasen
Connecticut USA