Sorry I missed your response.
I monitored the USB issue using a raw packet monitor. When it freezes, it shows no data coming from the camera at all, even while other devices connected to the same hub are still passing data. It even fails to respond to basic device ID query. The fan and light on the camera will also remain active when freezes. It's not just SharpCap this happens with, but also APT, Altair Capture, etc.. I even tested it with multiple powered hubs and extensions, as well as direct connection. Even tested it using cable/hub/extension borrowed from a follow AP'er with a working 183 rig. Same problem.
On the color gradient issue. Now I'm being told that the green/magenta gradient is not a software or DSS setting issue but is completely normal for the camera. That I should treat every target as if there's significant gradient caused by LP/sky glow on top of whatever LP/sky glow gradients that may be present.
183C live stacking issue
Discussion of features and issues relating to Altair Astro Cameras
Jump to
- General
- ↳ Forum Rules
- ↳ Announcements
- ↳ What's New
- ↳ Gallery
- ↳ General Discussions
- ↳ SharpCap Beta Testing Forum
- Help and Support
- ↳ SharpCap User Manual
- ↳ SharpCap FAQ
- ↳ Bug Reports
- ↳ How do I?
- ↳ Tutorials
- ↳ Tips and Tricks
- ↳ Feature Suggestions
- ↳ Implemented Features
- ↳ Not Currently Planned
- ↳ Camera Specific
- ↳ Altair Cameras
- ↳ ASCOM Cameras
- ↳ Basler Cameras
- ↳ Celestron / Imaging Source Cameras
- ↳ Point Grey Cameras
- ↳ QHY Cameras
- ↳ Webcams and Frame Grabbers
- ↳ ZWO Cameras
- ↳ Other Cameras
- Using SharpCap
- ↳ Planetary Imaging
- ↳ Solar and Lunar Imaging
- ↳ Deep Sky Imaging
- ↳ Other Astro Imaging
- ↳ Non-Astro Imaging
- ↳ Live Stacking
- ↳ Polar Alignment
- ↳ Scripting
- ↳ The Sequencer and Sequence Planner