Hardware connection to only mono camera
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Hardware connection to only mono camera
I have a color and a mono camera. Is there a way to set the filter wheel to only connect to my 1600mm-c and not my 174mc? I always get error messages saying it couldn't connect to the filter wheel when I use my color camera. (I only use filter wheel in mono camera)
- admin
- Site Admin
- Posts: 13330
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Hardware connection to only mono camera
Not exactly what you want, but in SC3.1 you can set an option to *not* autoconnect to ASCOM hardware when opening a camera (it's a checkbox in with the ASCOM hardware setup). Then you won't get the warnings and will just have to tick the connected box after opening your mono camera.
cheers,
Robin
cheers,
Robin