Sharpcap lists the camera under 'direct show via sharpcap pipeline only. Choosing this gives the warning 'operating via directshow may reduce...' but there is no other listing under the camera menu. If I open anyway, it looks ok but no frames get captured.
[QHY5(Native WDM)]
Resolution=1280x1024
FPS=8.00
Colour Space=MONO8
Output Format=AVI files (*.avi)
Frame Rate Limit=Maximum
Exposure=31.3ms
Timestamp Frames=Off
Gamma=1
Gain=60
Apply Flat=None
Subtract Dark=None
Display Brightness=1
Display Contrast=1
Display Gamma=1
TimeStamp=2017-11-23T01:06:39.6273686Z