Satellite trails

Somewhere to ask questions about the best way to use SharpCap
Forum rules


If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Post Reply
Ronald
Posts: 37
Joined: Sat Feb 29, 2020 9:51 pm

Satellite trails

#1

Post by Ronald »

How can i adjust the stacking algorithm to be more sensitive to satellite trails? Also how many frames does it take to remove them?
Thanks
Ronald
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Satellite trails

#2

Post by admin »

Hi Ronald,

the following should help:

1) turn on 'sigma clipped' stacking, see https://docs.sharpcap.co.uk/4.0/#Stacking%20Tab
2) if necessary turn down the sigma threshold
3) the first 10 or so frames (see initial frame count) are not protected against satellite trails - this is the period when SharpCap builds up the statistical information that is required to detect excessively bright pixel data that allows it to reject satellite trails from then on.

cheers,

Robin
Ronald
Posts: 37
Joined: Sat Feb 29, 2020 9:51 pm

Re: Satellite trails

#3

Post by Ronald »

Ok thanks for reply, another question would using an initial frame count of 5 make any difference?
Thanks again Ronald
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Satellite trails

#4

Post by admin »

Hi,

there is obviously less chance of getting a trail in the first 5 frames than the first 10, but there are some negatives to it - the effectiveness of determining what values are 'good' and what values are 'bad' is reduced when the initial number of frames is smaller - that means that it may let in more satellite trails later or may get some other artifacts in the image if the value of particular pixels is abnormal during the first few frames. It's one of those things where you have to try it our really to see if it helps in your situation.

cheers,

Robin
Post Reply