Changing The Cooling Rate

Somewhere to ask questions about the best way to use SharpCap
Forum rules


If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Post Reply
RMSQueenMary
Posts: 68
Joined: Mon Jan 15, 2018 4:58 am

Changing The Cooling Rate

#1

Post by RMSQueenMary »

I just downloaded the most recent version of SharpCap 4.0. I tested out the Sequencer and wanted to slow cool the camera to keep the dew out. Is there a way to change from 8°C per minute to let say 1°C per minute?
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Changing The Cooling Rate

#2

Post by admin »

Hi,

if you have the very latest SharpCap (4.0.7995) then you will have a cooling rate adjustment for both the sequence planner and sequence editor. For instance see - https://docs.sharpcap.co.uk/4.0/#Cooling . I think that's what you are looking for.

cheers,

Robin
RMSQueenMary
Posts: 68
Joined: Mon Jan 15, 2018 4:58 am

Re: Changing The Cooling Rate

#3

Post by RMSQueenMary »

admin wrote: Sat Jul 24, 2021 2:53 pm Hi,

if you have the very latest SharpCap (4.0.7995) then you will have a cooling rate adjustment for both the sequence planner and sequence editor. For instance see - https://docs.sharpcap.co.uk/4.0/#Cooling . I think that's what you are looking for.

cheers,

Robin
Thank you Robin. I am bit overwhelmed by SharpCap 4.0. Lots of features. :o :lol:
Post Reply