I was imaging a nebula using live stacking and saving all raw frames with a ZWO294MC Pro. When done, the "save as shown" PNG was in color as expected, but the raw frames were all grey - maybe the slightest hint of color but negligible at best. Why would I not get color in my saved raw frames? I processed in DSS and even tried bumping up the saturation and it just colored the whole frame unnaturally.
Thanks
Mark
Saving Raw frames, lose color
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Re: Saving Raw frames, lose color
You need to debayer the Raws:-
https://stargazerslounge.com/topic/3177 ... er-in-dss/
viewtopic.php?t=911
Hope this helps
Neil
https://stargazerslounge.com/topic/3177 ... er-in-dss/
viewtopic.php?t=911
Hope this helps
Neil
Scopes: Celestron C11, 102SLT , Ascension 127mm Apo, Opticstar 152mm Mak, Ascension 80mm Apo
Mounts: EQ8, EQ5 Pro, Nexstar SLT
Imaging: ASI1600MM-Cool, ASI533MC-Pro, ASI290MM, ASI224MC, Quark, QHY5L-II-M,
Opticstar 82 eyepieces, lots of other stuff
Mounts: EQ8, EQ5 Pro, Nexstar SLT
Imaging: ASI1600MM-Cool, ASI533MC-Pro, ASI290MM, ASI224MC, Quark, QHY5L-II-M,
Opticstar 82 eyepieces, lots of other stuff
Re: Saving Raw frames, lose color
Thank you that did it!
Mark
Mark