Scope control panel
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Scope control panel
Hi, I'm trying to use the plate solving with SC, I've got it set to auto detect which should be asps, I'm not getting the mount control panel only the eqmod panel that also appears in Stellarium, Im using Stellarium scope to connect to Stellarium which I've got configured to Heq5/Eq6. I assume I'm doing something wrong and I'm hoping someone can point me in the right direction. Thanks.
- admin
- Site Admin
- Posts: 13330
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Scope control panel
Hi,
Check that you have selected the EQMOD Ascom driver in the hardware settings ( https://docs.sharpcap.co.uk/3.2/#Hardware%20Tab ), also check that you have expanded the 'Scope Controls' section of the camera controls panel. Once you've done both of those you should see the telescope control area – you may need to tick the box to connect at that point.
Cheers, Robin
Check that you have selected the EQMOD Ascom driver in the hardware settings ( https://docs.sharpcap.co.uk/3.2/#Hardware%20Tab ), also check that you have expanded the 'Scope Controls' section of the camera controls panel. Once you've done both of those you should see the telescope control area – you may need to tick the box to connect at that point.
Cheers, Robin
Re: Scope control panel
Great thanks for that, it was just the scope control button, so all sorted now.