Copy Sensor Analysis Results

[remyastro]

Hi all,

I have SharpCap PRO and I have performed sensor analysis for my various cameras.

When I copy the sensor analysis data on my clipboard I get Excel Comma Separated Values (CSV) files which I can convert into Excel files.

But what I get then are spreadsheets which do not contain all analysis data! (See attached copy)

What did I wrong?
How to get spreadsheets with all information including Measurement Graph and complete Results?
Where are these data stored in my computer?

Thank you for your help!
Cheers

[admin]

Hi,

I don't think your attachment worked quite properly, but when you copy the data you only get the data from the table, not the graphs – you should however get the full data that is shown in the table. You can recreate the graphs once the data is pasted into Excel if you want.



Cheers, Robin

[turfpit]

Where are these data stored in my computer?

See viewtopic.php?f=19&t=532&p=2441&hilit=s ... tion#p2441

Dave

[remyastro]

Sorry Robin,I was facing problem to include the attachment.

I have edited again my post from where you can now upload the file ''Sensor Response".

How is it that I had only part of all the data in the excel spreadsheet compare to the completed table I got at the end of the sensor analysis?

Thank you again for your help.
Cheers.

Remy

[admin]

Hi,

I just ran the analysis on the 183M pro that I have here and everything seemed to work as I'd expect – once the analysis was completed I pressed the 'copy data to clipboard' button and pasted into Excel and got the full data table in Excel – see below.

Capture.PNG (127.64 KiB) Viewed 2601 times

I'm sure you must be doing something that is subtly different to this, but I can't quite work out what yet.

Cheers, Robin

[remyastro]

Hi Robin,

Got it right this time!

Gain Value e/ADU Read Noise (e) Full Well (e) Relative Gain Rel. Gain (db) Dynamic Range (Stops)
100 3,936390301 3,307393073 16123,45467 1 0 12
125 3,438493804 3,386832007 14084,07062 1,144800755 1,174598141 12
158 2,494546769 2,862126041 10217,66357 1,577998196 3,962130047 11,80169051
190 2,075620921 2,715667698 8501,743293 1,896488064 5,559002272 11,61223603
199 1,982440134 2,690666407 8120,074791 1,985628838 5,957961434 11,55931377
200 1,968187195 2,678996995 8061,694751 2,000008084 6,020635023 11,55517448
251 1,572732346 2,534114541 6441,911688 2,502899055 7,968866686 11,31179143
316 1,252000393 2,399631041 5128,193611 3,144080723 9,949873756 11,06142242
398 0,995504095 2,299357216 4077,584772 3,954167865 11,94110205 10,79226854
400 0,988380084 2,290432517 4048,404822 3,982668577 12,00348335 10,78751779
501 0,790860296 2,177925884 3239,363771 4,977352287 13,93996761 10,53853991
630 0,630540849 2,072257041 2582,695316 6,242879125 15,90769852 10,28345878
794 0,499876445 1,991597783 2047,493919 7,874726527 17,92470961 10,00571714
890 0,448233815 1,945795854 1835,965705 8,782002099 18,87187073 9,881963039
900 0,441910592 1,947469726 1810,065786 8,907662249 18,99527483 9,860225516
1000 0,39710172 1,909797072 1626,528647 9,912800923 19,92392769 9,734161166
1258 0,316451052 1,839984823 1296,18351 12,43917589 21,89583218 9,460360404
1584 0,252089706 1,768497611 1032,559438 15,61503782 23,87086081 9,189484845
1995 0,200844672 1,724372399 822,6597758 19,59917714 25,84475676 8,898080719
2511 0,158124617 1,66188954 647,6784325 24,89422816 27,92197331 8,606309399
3162 0,127357643 1,64981391 521,6569057 30,90815917 29,8014628 8,304654141
3981 0,100257233 1,594717906 410,6536244 39,26290605 31,87964882 8,008476976
4998 0,078542269 1,557386526 321,7091337 50,11811287 33,9998942 7,690486036


I don't know why I hadn't pasted the complete record, the fist time ...

Thank you for your time, I appeciate.

Cheers,
Remy

[remyastro]

Hi,

I can now copy the sensor analysis results into excel spreadsheets .

But I didn't find these files in my computer as mentionned. I tried searching files as 'SensorCharacteristics' in my computer but with no results.
Are all sensor analysis results automatically stored in the computer (I mean not only the last sensor analysis) ? and where can I retrieve them, if I haven't saved them manually ?

I ask again the question, because when I change camera during an imaging session I'd like to re-use the Smart Histogram Brain Window for each camera without running again sensor analysis.

Thank you for your help.

Cheers, Remy

[admin]

Hi,

If you look at the link to a different thread that Dave posted further up, it gives the position on the file system where you will find the analyses files. The folder is inside a hidden folder, so you will need to make sure that Windows Explorer is showing hidden files and folders.

Cheers, Robin

[remyastro]

Cool!

Thanks Robin!

Remy

[remyastro]

Hi Robin, Hi Dave,

Thanks to your previous explanations, I can now get and save my sensor analysis results.

As I am very interested in using the Smart Histogram Brain Window to reduce as much as possible the read noice in my pictures, I have carried out the sensor analysis for my prefered cameras, i.e. Altair 183C PRO and Atik 314L mono.

Below are the results about which I have questions:

183C RAW12.docx

(289.27 KiB) Downloaded 122 times

183C RAW8.docx

(749.94 KiB) Downloaded 96 times

314L.docx

(686.29 KiB) Downloaded 95 times

I do not undersand why 183C Raw 8 graph looks so different from Raw 12 one?
I do not understand why 314L results table has only one line and empty graphs? What wrong have I done?

I have performed these tests several times with same results each time.

Could you please explain these sensor analysis results?
Thank you for your help.

Cheers, remy