Moving from EZCAP to SharpCap

Somewhere to ask questions about the best way to use SharpCap
Forum rules


If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Post Reply
astroalbo
Posts: 1
Joined: Fri Feb 07, 2020 6:22 pm

Moving from EZCAP to SharpCap

#1

Post by astroalbo »

Hi. I am a new user and I am from Chile. So far I have used EZCAP for deep sky astrophotography, with my QHY168C camera. I want to switch to SharpCap, but I don't understand how to set the temperature of the camera or where the equivalent of the EZCAP Planner is. In short, I don't know how to do the initial set. Sorry for my English, but it's not my language. Thanks for your help.
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Moving from EZCAP to SharpCap

#2

Post by admin »

Hi,

You can setup the cooling system by adjusting the target temperature control which you will find in the thermal control section on the right hand side – see the documentation for more info on this – https://docs.sharpcap.co.uk/3.2/#QHY%20 ... 20Controls

SharpCap does not have (currently) a way to set up sequences of actions to carry out.

Cheers, Robin
Post Reply