Hello,
I've really been enjoying Stellarium and I was wondering how one might go about syncing the two tighter?
Is this done through the mount because it knows the location?
Or, what is the best way to do this - if it can be done?
Thank you for your time and help,
Brett
Syncing SharpCap Pro 3.2 With Stellarium
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
-
- Posts: 17
- Joined: Tue Sep 10, 2019 4:17 pm
Syncing SharpCap Pro 3.2 With Stellarium
SharpCap 3.2
SkyWatcher AZ GTI Mount (In AZ mode)
SynScan App Pro (Windows: 1.17.3)
ZWO ASI 187 MC
Apatura 60
Windows 10 (1903 build 18362.295)
Laptop SurfaceBook (16 gigs of RAM)
SkyWatcher AZ GTI Mount (In AZ mode)
SynScan App Pro (Windows: 1.17.3)
ZWO ASI 187 MC
Apatura 60
Windows 10 (1903 build 18362.295)
Laptop SurfaceBook (16 gigs of RAM)
Re: Syncing SharpCap Pro 3.2 With Stellarium
I use ASCOM POTH to command the same scope from within different programs.
I also use "StellariumScope".
I also use "StellariumScope".
Roel
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Syncing SharpCap Pro 3.2 With Stellarium
Hi,
Yes, Stellarium Scope is probably the way to go here – it lets Stellarium take control of your mount and you can then slew to targets from within Stellarium. Any alignment adjustments you make within SharpCap should also be adjusted and show in Stellarium. Personally I didn't take to it, but many people enjoy using it.
Cheers, Robin
Yes, Stellarium Scope is probably the way to go here – it lets Stellarium take control of your mount and you can then slew to targets from within Stellarium. Any alignment adjustments you make within SharpCap should also be adjusted and show in Stellarium. Personally I didn't take to it, but many people enjoy using it.
Cheers, Robin
-
- Posts: 17
- Joined: Tue Sep 10, 2019 4:17 pm
Re: Syncing SharpCap Pro 3.2 With Stellarium
Thank you for the replies.
I'll give it a try.
Brett
I'll give it a try.
Brett
SharpCap 3.2
SkyWatcher AZ GTI Mount (In AZ mode)
SynScan App Pro (Windows: 1.17.3)
ZWO ASI 187 MC
Apatura 60
Windows 10 (1903 build 18362.295)
Laptop SurfaceBook (16 gigs of RAM)
SkyWatcher AZ GTI Mount (In AZ mode)
SynScan App Pro (Windows: 1.17.3)
ZWO ASI 187 MC
Apatura 60
Windows 10 (1903 build 18362.295)
Laptop SurfaceBook (16 gigs of RAM)