I use Altair GPCAM3 385C and there is no brightness, contrast, and gamma slider under Image Controls.
Is there a way to access them?
No Brightness And Contrast Slider Under Image Controls With Altair GPCAM3 385C
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
-
- Posts: 68
- Joined: Mon Jan 15, 2018 4:58 am
- admin
- Site Admin
- Posts: 13296
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: No Brightness And Contrast Slider Under Image Controls With Altair GPCAM3 385C
Hi,
Usually, I'd consider it a good thing that these controls are unavailable as the contrast and gamma controls can potentially reduce the fidelity of the data that you capture by applying digital manipulation to the image data before it gets given to SharpCap.
These controls are not available for Altair cameras when the camera is in 'raw' mode. If you really want to access these controls you have to put the camera into RGB mode, but that brings other limitations such as being limited to an eight bit bit depth and having to trust the debayering algorithm built into the camera SDK. I would usually advise against using these controls and instead relying on the following
Exposure, gain and black level controls for the camera
the histogram stretch functionality in the mini histogram as a substitute for contrast/brightness/gamma to adjust the image as viewed without changing the image data that is safe to file
Cheers, Robin
Usually, I'd consider it a good thing that these controls are unavailable as the contrast and gamma controls can potentially reduce the fidelity of the data that you capture by applying digital manipulation to the image data before it gets given to SharpCap.
These controls are not available for Altair cameras when the camera is in 'raw' mode. If you really want to access these controls you have to put the camera into RGB mode, but that brings other limitations such as being limited to an eight bit bit depth and having to trust the debayering algorithm built into the camera SDK. I would usually advise against using these controls and instead relying on the following
Exposure, gain and black level controls for the camera
the histogram stretch functionality in the mini histogram as a substitute for contrast/brightness/gamma to adjust the image as viewed without changing the image data that is safe to file
Cheers, Robin
-
- Posts: 68
- Joined: Mon Jan 15, 2018 4:58 am
Re: No Brightness And Contrast Slider Under Image Controls With Altair GPCAM3 385C
Thank you Robin.admin wrote: ↑Mon Apr 22, 2019 8:40 pm Hi,
Usually, I'd consider it a good thing that these controls are unavailable as the contrast and gamma controls can potentially reduce the fidelity of the data that you capture by applying digital manipulation to the image data before it gets given to SharpCap.
These controls are not available for Altair cameras when the camera is in 'raw' mode. If you really want to access these controls you have to put the camera into RGB mode, but that brings other limitations such as being limited to an eight bit bit depth and having to trust the debayering algorithm built into the camera SDK. I would usually advise against using these controls and instead relying on the following
Exposure, gain and black level controls for the camera
the histogram stretch functionality in the mini histogram as a substitute for contrast/brightness/gamma to adjust the image as viewed without changing the image data that is safe to file
Cheers, Robin