Hi,
My Pegasus focus cube connects OK and it think the autofocus routine would work (the Scan in/out buttons seem to work). I cannot for the life of me see any buttons for my manually moving the focuser. The manual mentioned them being under camera controls but they are not.
Does anyone know where they are?
Thanks and Clear Skies
How do I Manually focus my ASCOM focuser
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
- admin
- Site Admin
- Posts: 13344
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: How do I Manually focus my ASCOM focuser
Hi,
The manual focus controls will be located in a section of the controls on the right-hand side headed 'scope controls'. You may need to expand this section. If the section is not present in the controls of the right then you may need to configure SharpCap to use your focuser in the hardware page of the settings.
Please see the documentation for more information – https://docs.sharpcap.co.uk/3.2/#ASCOM% ... %20Control
Cheers, Robin
The manual focus controls will be located in a section of the controls on the right-hand side headed 'scope controls'. You may need to expand this section. If the section is not present in the controls of the right then you may need to configure SharpCap to use your focuser in the hardware page of the settings.
Please see the documentation for more information – https://docs.sharpcap.co.uk/3.2/#ASCOM% ... %20Control
Cheers, Robin