Live stack poor frames
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
-
- Posts: 23
- Joined: Mon Feb 12, 2018 5:45 pm
Live stack poor frames
May be a silly question but having great results using live stack but in say a 2?hour imaging session is there any setting to stop the SharpCap stacking frames that have aircraft flying through or other unwanted frames that ruin the finished stack how can I save stack in fits set it to fits but seems to save it each time in png thanks lee
Re: Live stack poor frames
Lee
Have a good read of https://docs.sharpcap.co.uk/3.2/#Live%20Stacking particularly FWHM tab for filtering poor frames (think of thin cloud) and Stacking tab for Sigma Clipped Stacking (to filter out airplane trails).
Dave
Have a good read of https://docs.sharpcap.co.uk/3.2/#Live%20Stacking particularly FWHM tab for filtering poor frames (think of thin cloud) and Stacking tab for Sigma Clipped Stacking (to filter out airplane trails).
Dave
-
- Posts: 23
- Joined: Mon Feb 12, 2018 5:45 pm
Re: Live stack poor frames
Thanks had a read of both all understood but do I use both at the same time or choose 1
Re: Live stack poor frames
Lee
You can use either function on its own or have both enabled together.
Dave
You can use either function on its own or have both enabled together.
Dave
-
- Posts: 23
- Joined: Mon Feb 12, 2018 5:45 pm
Re: Live stack poor frames
Thank you I will give it a try on the next clear sky