Tried my QHY 367C with SharpCap.
The images are coming out in black and white.
The facility to de bayer does not seem to be there so I am not sure that is the problem.
The correct camera appears in the heading line.
Any help would be fantastic.
QHY367C
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
- admin
- Site Admin
- Posts: 13338
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: QHY367C
Hi,
can you send a screenshot? I suspect that the problem is that the QHY SDK is not reporting the bayer pattern of this camera correctly (probably reporting as a mono sensor). This would show up by the 'Colour Space' control having either only MONO options or not appearing at all (that happens if there is only one option).
cheers,
Robin
can you send a screenshot? I suspect that the problem is that the QHY SDK is not reporting the bayer pattern of this camera correctly (probably reporting as a mono sensor). This would show up by the 'Colour Space' control having either only MONO options or not appearing at all (that happens if there is only one option).
cheers,
Robin
Re: QHY367C
Hi Robin,
I am away until the end of the week but will certainly check this when I return.
What exactly would you like a screen shot of. The whole SharpCap panel?
Vic
I am away until the end of the week but will certainly check this when I return.
What exactly would you like a screen shot of. The whole SharpCap panel?
Vic
- admin
- Site Admin
- Posts: 13338
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: QHY367C
Hi Vic,
yes please - the whole screen showing as many controls as you can on the right - particularly the ones in the 'Capture Format and Area' section. A SharpCap log would be helpful too.
cheers,
Robin
yes please - the whole screen showing as many controls as you can on the right - particularly the ones in the 'Capture Format and Area' section. A SharpCap log would be helpful too.
cheers,
Robin
Re: QHY367C
Hi Robin,
I have tried everything you have suggested
The camera shows up in the camera selectin and I select qhy637C which is ticked.
I still have the same problems.
A screen shot is at www.vicpunch.com/sharpcap.htm
It shows an image has been taken but it locked up.
The colour settings do not show up.
Vic
I have tried everything you have suggested
The camera shows up in the camera selectin and I select qhy637C which is ticked.
I still have the same problems.
A screen shot is at www.vicpunch.com/sharpcap.htm
It shows an image has been taken but it locked up.
The colour settings do not show up.
Vic
- admin
- Site Admin
- Posts: 13338
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: QHY367C
Hi Vic,
Your screenshots shows that you have the camera running in rgb24 mode comma where is it would be best to run it in one of the raw modes, either raw 8 or raw 16. In those modes you will have choice of debayer pattern but you may find that the camera just works better anyway. I also noted that you have the exposure set to 300 seconds and various other controls set to odd values. I'd suggest closing the camera and reopening it with the control key pressed down which will reset all the controls on the camera to the default values.
Hope this helps, Robin
Your screenshots shows that you have the camera running in rgb24 mode comma where is it would be best to run it in one of the raw modes, either raw 8 or raw 16. In those modes you will have choice of debayer pattern but you may find that the camera just works better anyway. I also noted that you have the exposure set to 300 seconds and various other controls set to odd values. I'd suggest closing the camera and reopening it with the control key pressed down which will reset all the controls on the camera to the default values.
Hope this helps, Robin