Is it possible to have 2 "ASCOM-connections" at the same time with the same mount?
eg. I have to manage "object-GoTo's" with a planetary program (ASCOM connected).
And, at the same time, the plate solver should also synced with the mount.
I think that it doesn't work.
At the moment I use TheSkyX to plate solve an image taken with the camera.
But I must leave SharpCap before TheSkyX can connect to the camera.
What I'm missing is a button within SharpCap that allows to disconnect the camera connection.
Under the Camera menu their is an option to reconnect but none to disconnect.
Thanks in advance replying.
Roel
Plate Solving
Forum rules
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Plate Solving
Roel
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro
- admin
- Site Admin
- Posts: 13280
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Plate Solving
Hi Roel,
it is possible to close the camera by re-selecting it from the menu while it is active - see http://docs.sharpcap.co.uk/2.9/#Available%20Cameras. Maybe this is not the most obvious way of doing it
Many ASCOM mounts do allow multiple connection (eg EQMOD), others can sometimes be used via an ASCOM hub driver to allow multiple connections.
cheers,
Robin
it is possible to close the camera by re-selecting it from the menu while it is active - see http://docs.sharpcap.co.uk/2.9/#Available%20Cameras. Maybe this is not the most obvious way of doing it
Many ASCOM mounts do allow multiple connection (eg EQMOD), others can sometimes be used via an ASCOM hub driver to allow multiple connections.
cheers,
Robin
Re: Plate Solving
Thanks David for your prompt reply!
To support SharpCap development I paid for the Pro version, although I actually don't need any of the Pro features.
I wish you all the best with the development.
Regards,
Roel
To support SharpCap development I paid for the Pro version, although I actually don't need any of the Pro features.
I wish you all the best with the development.
Regards,
Roel
Roel
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro
Celestron Nexstar Evolution 8 - Celestron Nexstar 6 SE - StarSense
ZWO ASI533MC-Pro -- ZWO ASI533MM-Pro