Conesharp Questions

Somewhere to ask questions about the best way to use SharpCap
Forum rules


If you have a problem or question, please check the FAQ to see if it already has an answer : https://www.sharpcap.co.uk/sharpcap-faqs
Post Reply
cuivenion
Posts: 227
Joined: Wed Feb 15, 2017 7:37 pm

Conesharp Questions

#1

Post by cuivenion »

I assume that when using Conesharp I at no point use any syncs. Also, when centering each star, do I use the eqmod controls? Or do I undo the clutches and center manually. Apart from the final step of course, where I'm centering using the dovetail bolts to remove the error.
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Conesharp Questions

#2

Post by admin »

Hi,

it should all be done with EQMOD controls. There are no syncs and in fact you must disable any multipoint sync mapping in EQMOD otherwise that will hide the very error that ConeSharp is trying to measure.

cheers,

Robin
cuivenion
Posts: 227
Joined: Wed Feb 15, 2017 7:37 pm

Re: Conesharp Questions

#3

Post by cuivenion »

Thanks, just need a clear sky now.
Post Reply