Warm up camera button

Got an idea for something that SharpCap should do? Share it here.
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
Post Reply
User avatar
Stub Mandrel
Posts: 19
Joined: Wed Apr 12, 2017 6:48 pm

Warm up camera button

#1

Post by Stub Mandrel »

This should be an easy one to do, as it is in the sequencer.

For the end of the evening could we have a simple button to initiate the steady warm up of the camera rather than just turning off the cooling?

Ideally, this would not affect the default status of the camera, so you can expect it to starts cooling automatically at switch on.
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Warm up camera button

#2

Post by admin »

Hi,

thanks, good suggestion (particularly on not affecting saved temperature). Will note this one down.

cheers,

Robin
Post Reply