This should be an easy one to do, as it is in the sequencer.
For the end of the evening could we have a simple button to initiate the steady warm up of the camera rather than just turning off the cooling?
Ideally, this would not affect the default status of the camera, so you can expect it to starts cooling automatically at switch on.
Warm up camera button
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
- admin
- Site Admin
- Posts: 13287
- Joined: Sat Feb 11, 2017 3:52 pm
- Location: Vale of the White Horse, UK
- Contact:
Re: Warm up camera button
Hi,
thanks, good suggestion (particularly on not affecting saved temperature). Will note this one down.
cheers,
Robin
thanks, good suggestion (particularly on not affecting saved temperature). Will note this one down.
cheers,
Robin