Full screen

Got an idea for something that SharpCap should do? Share it here.
Forum rules
'+1' posts are welcome in this area of the forums to indicate your support for a particular feature suggestion. Suggestions that get the most +1's will be seriously considered for inclusion in future versions of SharpCap.
Post Reply
User avatar
Tiago Ferreira
Posts: 143
Joined: Sun Mar 21, 2021 10:50 pm

Full screen

#1

Post by Tiago Ferreira »

Just that. The F11 turned to a full screen mode where all the image we are observing through live stack could fill all the screen and not only a part of it.
Would be wonderful for EAA.
Is it viable?
Youtube channel: https://youtube.com/@DobsonianPower

12" f/5 Dobsonian GSO
8" f/6 Dobsonian GSO
6" f/5 Dobsonian Go-To Virtuoso Gti
Dwarf II Smart Telescope
Geoptik Eartha Eq Platform
ZWO ASI224MC + ZWO ASI294MC
User avatar
admin
Site Admin
Posts: 13177
Joined: Sat Feb 11, 2017 3:52 pm
Location: Vale of the White Horse, UK
Contact:

Re: Full screen

#2

Post by admin »

Hi,

you can come very close to this using the existing F11 full screen mode and then 'unpinning' the camera controls and live stacking panel so that the fold into the side of the screen when not in use (like the menu does in full screen mode). You get something like this
Capture.JPG
Capture.JPG (214.86 KiB) Viewed 497 times
The other option is to use 2 monitor mode, which moves the main image to a second monitor (completely full screen).

Hope this helps,

Robin
User avatar
Tiago Ferreira
Posts: 143
Joined: Sun Mar 21, 2021 10:50 pm

Re: Full screen

#3

Post by Tiago Ferreira »

I use that already. I was hoping it was possible to change the F11 effect to a full screen in the future...
Youtube channel: https://youtube.com/@DobsonianPower

12" f/5 Dobsonian GSO
8" f/6 Dobsonian GSO
6" f/5 Dobsonian Go-To Virtuoso Gti
Dwarf II Smart Telescope
Geoptik Eartha Eq Platform
ZWO ASI224MC + ZWO ASI294MC
Post Reply